Pirate 4x4 banner

Cross over question?

1K views 7 replies 4 participants last post by  Shaker 
#1 ·
Does anyone know if you can use the stock steering arm on the passenger side to do the crossover sterring?I havent been able to look in to this yet,but wondering if anyone has tried this.
 
#2 ·
Nope. The stock steering arm is parallel with the axle. The cross over steering arm is perpendicular to the axle. Also, if it's a ten bolt or Dana 44 the bolt pattern for the steering amr will be wrong.

Look at how your steering works now, and think about how it will have have to move with the cross over.

Here's a quick sketch of the stock and cross over...



[ 10-24-2001: Message edited by: MaxCrack ]
 
#4 ·
Its the dame head up the ass trick again.I dont what the hell I was thinking.Don't do crack!!!!!! <IMG SRC="smilies/nuke.gif" border="0"> Hey where did you get that arm at? <IMG SRC="smilies/grinpimp.gif" border="0">
 
#5 ·
Originally posted by flexychevy1:
<STRONG>Its the dame head up the ass trick again.I dont what the hell I was thinking.Don't do crack!!!!!! <IMG SRC="smilies/nuke.gif" border="0"> Hey where did you get that arm at? <IMG SRC="smilies/grinpimp.gif" border="0"></STRONG>
I made it. E-mail me if you are interested at cfryer9968@home.com thanks
 
#7 ·
Originally posted by Shaker:
<STRONG>No you need to make/buy a arm like the one I just made for mine. Also machine the "knuckle" like the 1 in this pic....
<IMG width=607 height=329 SRC="http://www.pirate4x4.com/ubb/uploads/44-knuckle.jpg"></STRONG>
Check your e-mail!!!!
<IMG SRC="smilies/grinpimp.gif" border="0">
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top