Here at M&M I have been building for over 18 years. We can build you a one off buggy, custom cage or even bumpers. Our chassis design has won the ECORS endurance racing Series last year and is in the running for it this year. These races are very hard on parts and average about 3-4 hours long. Don't let that fool you. We also build some of the most comfortable 2 and 4 seat buggies that still can get it when needed.. We use every weekends experience to validate and improve design. We have mockup ls engines as well as transmissions and an atlas. so we can mock up your chassis without many of your parts on hand. We are located near Winston Salem, North Carolina.
to Check out all the Builds www.mandmoffroad.com
Or contact us
336-909-2076 PJ
Pics...


645908

http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/CIMG0747.JPG


http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/Rkfinishedsideshot1.jpg

http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/CIMG1037.JPG

http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/.pond/CIMG0470.JPG.w300h225.jpg

http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures
/CIMG0488.JPG


http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/CIMG0999.JPG


http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/CIMG0327.JPG


http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/CIMG0200.JPG


http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/.pond/103_1178.JPG.w560h315.jpg

http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/.pond/CIMG1022.JPG.w300h225.jpg


General Pricing.

2 Seat Bare chassis $3400.00 Includes .188 wall DOM sliders and Main lower subframe. The rest is .120 Wall DOM tubing.

4 Seat Bare chassis $3800.00 Includes .188 wall DOM sliders and Main lower subframe. The rest is .120 Wall DOM tubing.


We can mock up your front clip for an additional $300.00 Plus Materials

To make it a Roller starts at $3000.00 Plus parts.

Roller = Mounting Engine, trans, tcase, and Setting up the 4link suspension front and rear. This also includes Finishing out the lower subframe.

http://www.mandmfab.com/sitebuildercontent/sitebuilderpictures/CIMG0731.JPG

I sent you an email for a quote on a turnkeyish rig. Let me know if you got it.

Got it last night. I will send you an estimate Today. I look forward to doing business with you.

Thanks PJ

This is what you get with a bare chassis price. #12 ready for delivery. This customer went with.188 wall A,B,C pillars for extra strength. Basically ready for the hood and tie in pieces from the shock towers to the main chassis. These will fit just about any hood combo you can come up with.


621377

621378

621379

So if I was interested in a 4 seater roller, and you say, a roller starts at $3000, you mean it would be $3800 for chassis + $3000 to Mount engine, tranny, t-case, setup 4link suspension front and rear and finish out subframe.....so basically $6800 for a roller (using my motor, tranny, t-case, axles and coilovers) correct?

Thanks
Jeff

Yes, IF you use ori's or don't want air bumps.$6800 for a bare roller. If you want Air bumps front and rear it is another $350 labor plus parts and materials to set them up. Then if you want me to setup the front clip it is an additional $350 plus parts and materials for most of the standard ones. Please feel free to contact me with any other questions.


Thanks PJ

PJ, Builds a nice buggy. Very easy to work with. Hes always there to talk to after the build. He will help anyway he can. I love my buggy! You will love one to.

You have PM with a few questions I have. Thanks for your time!

Pm sent. thanks for your interest.

I just placed my order with Pj!

Can't wait to see my Chassis......

I just placed my order with Pj!

Can't wait to see my Chassis......

Congrads man you will love it been ordering parts all day to finish mine

I mailed my deposit for a Willys based buggy today. I'm looking forward it!!

I mailed my deposit for a Willys based buggy today. I'm looking forward it!!

Awesome! PJ does really nice work, you will be very happy.

Attention to detail and top quality work, super good guy, very accomodating to his customers, his reputation matters to him and his work reflects it...

I could go on and on.

Can we see some of the rigs that PJ has built? I know some of you are still working on yours but I would like to see some of them. Hell it is advertisement for him to....
Still years to get mine... Like 3 /4 weeks

Can we see some of the rigs that PJ has built? I know some of you are still working on yours but I would like to see some of them. Hell it is advertisement for him to....
Still years to get mine... Like 3 /4 weeks

Mines at the top of this page. I will get some picks soon

Mines at the top of this page. I will get some picks soon

Great! I been clean the shop all day and getting my drive line setup to go as soon as I get my chassis....

Here's my 4 seat M&M buggy:

http://i1135.photobucket.com/albums/m632/harlan2011/Russ%20Pics/DSCN0515.jpg

http://i1135.photobucket.com/albums/m632/harlan2011/Russ%20Pics/DSCN0526.jpg

http://i1135.photobucket.com/albums/m632/harlan2011/Russ%20Pics/DSCN0674.jpg

http://i1135.photobucket.com/albums/m632/harlan2011/Russ%20Pics/DSCN0780.jpg

Dixie run...
http://www.pirate4x4.com/forum/picture.php?albumid=1241&pictureid=13010


#4
http://www.pirate4x4.com/forum/attachment.php?attachmentid=475867&d=1256826754

I would love to see what PJ and the guys could come up with if someone gave them an unlimited budget to work with...

:skull:

Killing me this waiting... lol

Great pics guys!!!

PJ is building #13 for me. Hell I'm 8400 miles away and he is a great guy to work with. I could not be happier with the customer service I get. All questions answered quickly and with great knowledge. His customers have even gotten involved and email me. Thanks RK!

Can't wait to see it in 2 weeks!!:D

Chris

PJ makes Bounty Hill - YouTube (http://www.youtube.com/watch?v=YXUPNtAlDpE)

I have a question where did you get the Jeep TJ grill hood and front winshield section from? Its in the 3rd picture

We usually pie cut are own oem metal hoods. We also use oem style metal grills and cut them down most of the time. The cowls we get from Jimmy's and Twisted. Its hard to reproduce these with factory sheetmetal.

thanks Pj

Here are a few from the Turnkey 4 seat build we are doing.

632476

632477

632478

632479

Here are a few from the Turnkey 4 seat build we are doing.

632476

632477

632478

632479

Buggy is looking good PJ. I need to speed up your going to pass me up

good lord that thing is bad

saw you at ure first of the year,you do some pretty work.
may give you a call over the winter for some tube work on my toy.

Thanks man, Sounds good give me a call..

I hear there is another Arkansas buggy in the works.

PJ...I have never been to your vendor page. I have #11 I think (correct me if I'm wrong). It is the 2.5t Rockwelled Big Block. PJ is the easiest person to work with. His work is not only top notch, but also very innovative. Every time he builds a Buggy he comes up with more creative ways to make it unique, functional, and very sexy. Just ask any of us who have partnered with him on our builds...you will get the same response from every one. I say partnered because you aren't just buying a Rig from him...you are collaborating WITH PJ to build your dream.

"M&M Fab is an investment in AWESOME!"

-Andy

http://img.tapatalk.com/6b2dbf9d-c636-c72a.jpgvery nice!

Sent from my LS670 using Tapatalk

Very nice!
http://img.tapatalk.com/6b2dbf9d-c636-c72a.jpg

Tell me about it...I am most jealous about this innovation. Good for everyone else that comes after that can get this design! It looks like you could pull the transfer case out the back and drop the tranny out the bottom without pulling the motor. At the very least it makes it very easy to drop the pan for filter changes and such.

Nicest rigs in the country coming out of NC....awesome work PJ

PJ...I have never been to your vendor page. I have #11 I think (correct me if I'm wrong). It is the 2.5t Rockwelled Big Block. PJ is the easiest person to work with. His work is not only top notch, but also very innovative. Every time he builds a Buggy he comes up with more creative ways to make it unique, functional, and very sexy. Just ask any of us who have partnered with him on our builds...you will get the same response from every one. I say partnered because you aren't just buying a Rig from him...you are collaborating WITH PJ to build your dream.

"M&M Fab is an investment in AWESOME!"

-Andy

I got #14 and Pj's work is some of the best I have seen!!!

Nicest rigs in the country coming out of NC....awesome work PJ

Thanks Chris. See you at RBD...:beer:

I got #14 and Pj's work is some of the best I have seen!!!

Thanks Patrick, i am glad you are happy with your purchase. The project is looking good.

how much extra for motor, tranny, and t case mounts on your 4 seater

how much extra for motor, tranny, and t case mounts on your 4 seater

It really depends on what you are using for the drive train. I sent a pm to get more info.

Thanks PJ

Thanks Chris. See you at RBD...:beer:



Thanks Patrick, i am glad you are happy with your purchase. The project is looking good.

Where's my thanks?? Just messing with you PJ :D

Where's my thanks?? Just messing with you PJ :D

He is just being nice to the new guy.... :D

Stopped in to see PJ last weekend. We got to see the hitman build. PJ is doing a great job as always.
Thanks PJ
Mike

No problem Mike. Hate i wasn't around to talk.

Here are some pics of the latest build using our new plasma table.
641253

641254

641255

641256

641257

644469

644470

644471

644472

644473

With the new plasma table we have been able to pull off some more one off parts, some custom signs and more art than we used to. Creativity can take a simple file to the next level.

645909

645910

645911
M&M 14 bolt truss
645912

Fixed style carrier bearing mount
645913

Looks great PJ! I can't wait for some custom touches when you do the rear steer on mine :D

A local sign for a Restaurant. Completed axles for the latest buggy.
650884

650885

Looks great...I love the sign. I see you are making great use of that CNC plasma table :D

I dropped off most/all of my parts to PJ sometime last week. What an adventure that was. We hit bad weather both ways. I know he knows which parts are mine because they had road salt all over them. On the way back it got real spooky heading back through WV. The best part was the dinner his wife made for us. He and his family are genuinely nice people.

I cant wait to he starts the build. I know i'm impressed with his work and I know you guys will definitely dig what we have came up with.

I dropped off most/all of my parts to PJ sometime last week. What an adventure that was. We hit bad weather both ways. I know he knows which parts are mine because they had road salt all over them. On the way back it got real spooky heading back through WV. The best part was the dinner his wife made for us. He and his family are genuinely nice people.

I cant wait to he starts the build. I know i'm impressed with his work and I know you guys will definitely dig what we have came up with.

Give us a little hint.

The Hitman 4 seater

663254

663255

663256

663257

663258

Looks good PJ. I know the owner will love it.
Mike

Looks good PJ. I know the owner will love it.
Mike

Yes I will! And it's all thanks to PJ and his guys for building such a sweet ride for me.

Chris

Whats on the tabel now? Ready to see whats next from PJ.