|
RCKRATZ 12-09-2002, 02:11 PM Need ring gear bolts for my 14 bolt. Called Drivetrain Direct and found out they were out of stock, and the guy tells me to just use Grade 8 bolts with a lock washer.....does this sound wrong to anyone else? Aren't these bolts Grade 10 or something for a reason? 4x4extreme 12-09-2002, 02:18 PM The bolts in my 60 were just grade 8 bolts Maine Jeepah 12-09-2002, 02:21 PM GM stealer can't get em? MJ RCKRATZ 12-09-2002, 02:37 PM I was trying to stay away from the stealer because I really am not to keen on spending $70 on ring gear bolts......:flipoff2: Maine Jeepah 12-09-2002, 02:46 PM did you check? I got my high steer studs cheaper at my local stealer than some of the parts gougers are selling them for. ;) Might be worth a phone call at least. ;) MJ rubiconray 12-09-2002, 03:24 PM Grade eight will be fine. Just be sure the shoulder diameter is the same. 5.9ctd_fj40 12-09-2002, 03:34 PM watch out some 14 bolts are left hand thread! :flipoff2: RCKRATZ 12-09-2002, 04:39 PM just got off the phone with the dealer... $55 for 12. :eek: RCKRATZ 12-09-2002, 05:36 PM anyone think I can't get by with grade 8's? Maine Jeepah 12-09-2002, 05:54 PM Originally posted by RCKRATZ just got off the phone with the dealer... $55 for 12. :eek: :eek: grade 8 it is! MJ:cool: Triaged 12-09-2002, 08:56 PM I got a few from Unitrax. They just gave me some used ones that they had laying around. 1(800)622-4327 Eskimo 12-10-2002, 07:38 AM They're grade 12 bolts...ask MR4WD where to get 'em :flipoff2: RCKRATZ 12-11-2002, 11:04 AM Paging MR. 4wd:flipoff2: | |