I need a listing or p/n for the D60f short tierod end. All these parts stores are trying to give me some long ass tie rod end. I need the one where the threads start right where the circular ball thing ends. Any one have a P/N for one? Or maybe a listing these guys can get right?


Charlo

I got these off shakers site but dont know whats what.
ES 2234R
ES 2233L
ES 2027L
ES 2026R
ES 2010L

ES2234R is the short GM driver's side TRE. But, it has a "bar" about 4" long between the threads and the cup. ES2233L is the longer passenger side with a hole for the stabilizer. The other numbers you list are for the GM DLEs. If you want a short replacement for ES2233L, you can use (as I did) ES2010L which is comparable but made for a Dodge (and the threads go up to the cup). I don't know the numbers for it, but I'll be there is an "R) comparable to ES2010L...

you can use (as I did) ES2010L which is comparable but made for a Dodge (and the threads go up to the cup
Thats exactly what I need. A left hand thread tierod with threads all the way up to ball joint. Ill go ahead an order the 2010L. I hope the tapers are the same. Thanks

Charlo

The taper and thread is the same, that is what I run right now in my GM D60...

Originally posted by charlo

Thats exactly what I need. A left hand thread tierod with threads all the way up to ball joint. Ill go ahead an order the 2010L. I hope the tapers are the same. Thanks

Charlo

If you send me a E-mail I would tell ya.....The ES 2010L & ES 2034R will be what you are looking for and they do have the same taper.....maybe pic will help ya.......

Any more ?'s.....:D

1 with stabilizer hole in it ( ES2233L ) used for INVERTED T steering......