Hummer Rim Centers

[CoryL]

Here they are, down and dirty...

3/8" cold rolled steel.
8 on 6.5 pattern.
Lug holes are chamfered for proper fit.
Designed for 3.5" of backspacing. If more is desired, it may require having more material removed or a press fit.

$45 each + shipping.

http://www.crlcustoms.com/images/hmrcen.jpg

[Tass]

Can you do them with the 6 bolt Unimog pattern?

Tass

[CoryL]

Originally posted by Tass
Can you do them with the 6 bolt Unimog pattern?

Tass

The only way I can keep that price is by ordering many at once.

I could get a set with that pattern made if you tell me what it is, but I will tell you the price will be at least $15 per center more.

Originally posted by Daniel
HEY good price... can you put a pattern in them for washout holes? I might be interested.

I can, but the additional machining will probably drive the cost up. Let me contact my machine shop and see what the additional cost would be.

[CoryL]

Originally posted by Tass
Can you do them with the 6 bolt Unimog pattern?

Tass

Guess my $15 additional per center price was off.

I can do them so long as you give me all the measurements:

Lug pattern
Lug hole diameter
If the lug hole needs to be chamfered
Hub diameter

These would be exactly like the picture above except setup for your axle.

$50 each + shipping

[CoryL]

Originally posted by Daniel
HEY good price... can you put a pattern in them for washout holes? I might be interested :)

A washout hole pattern can be added to the 8-lug setup as pictured above.

It will make the price $55 each.

Let me know how many you want. If it is substantial I may be able to get the machine shop to get a discount on them.

Let me know,

Cory