solid
01-07-2003, 12:23 PM
I have a friend who's trying to remove the differential fill plug in his 89 blazer s-10...The thing is stripped. any tricks on how to get it out?,,,thanks
|
solid 01-07-2003, 12:23 PM I have a friend who's trying to remove the differential fill plug in his 89 blazer s-10...The thing is stripped. any tricks on how to get it out?,,,thanks zip_tie_katterhenry 01-07-2003, 03:21 PM Are the Threads stripped or is it the bolt head. YNOTP 01-07-2003, 03:40 PM can he just buy a diff cover with a fill and drain plug in it? solid 01-07-2003, 08:48 PM the bolt head imrtoy 01-07-2003, 08:54 PM does it have a 3/8 drive socket head? ranger 01-07-2003, 10:11 PM Weld a bolt to it and take it out. Get a new plug, or use a pipe wrench on it to get it off, get a new plug. :skull: charlo 01-07-2003, 11:26 PM I have had real good luck with pipe wrenches. Those 2 foot long red monkey wrenches will take anything and will grab anything as long as you dont care about what it does to the anything. Charlo solid 01-08-2003, 12:51 PM Originally posted by imrtoy does it have a 3/8 drive socket head? yeah zip_tie_katterhenry 01-08-2003, 05:22 PM I would weld a nut on, if that isnt possible, drill the biggest hole possible MOST of the way through, tap it put a bolt in it with a lil lock tight. Takes a lil bit, but it will get it out. | |