OK everyone, now that I finally have the ability to keep a thread handy, let's get pics of your rigs up here

I'll be cleaning out the BSing occasionally, but I'll give y'all time to respond to each other.
When picture links go dead, they'll be deleted also

ok i'll play :D

current "condition"

http://www.pirate4x4.com/forum/attachment.php?attachmentid=158739&stc=1

http://www.pirate4x4.com/forum/attachment.php?attachmentid=158740&stc=1

and the way it was :

http://www.pirate4x4.com/forum/attachment.php?attachmentid=89&stc=1

Here's my hunk o hunk o burning junk
the face down ass up view

Here ya go.

Another

Ok

86f250. d60 front, 351 holley projected, 4.10s factory posi, 4 inch front springs, 1 ton rear springs and lift blocks removed stock blocks. 35 incbfg atko. my tow rig and dd

Lets try this again

OK

http://www.explorer4x4.com/rick_rearrock.jpg

Lots more photos and info at:
http://www.explorer4x4.com/tech_transform.html

:D

My rig. Specs at the bottom.

here ya go........

here is my new rig, see you guys on the con this weekend!

here

ok

here's the best I could find - usually forget to take pics when I'm out having fun.

The Anchor

Anchor shots

Anchor shots

waaa

Here is a pic of my buddys mule.

Heres a couple of my truck.
http://www.patmedia.net/clreinstein/Chris_BII.jpg

Ok this rig is not mine but my buds from this weekend on the con in little sluce (11-10-01)

:rolleyes:
Gatekeeper

:rolleyes:

:rolleyes:

ill play! another sploder...

Kewl!

More photos here:
http://www.rock-quip.rockcrawler.com

'BK

Three weeks ago...

YO

Can't get my pics to post, but check them out here: http://www.grapeapedesign.com
Follow the link to "Off-Road"

Dean

Here is my lil old 63

Big shocks, big tires, whatever...

Here is my little never ending project
Front and rear reverse 60's detroits 4:88 15 x 38 swampers cold duck dual transfer case, np 435 and lots lots more. :usa:

95 Bronco
==============
302, E4OD trans
10.25" Rear 4.56
Solid Dana 44 Front
8" Fabritech Susp Lift, 3" Body Lift
38.5" Swamper SXs

.

Here is my big F-250 up on one of the Iron Mnt. snow runs.:D :D

Just found this pic of my truck when it was pretty!!! That all changed in about 10 feet:D

http://www.bc4x4.com/tr/2001/vrubicon/F1000006.jpg

K here is my beast....By this week-end I should have it up to Par to go play in. Then I will send a real pic. Ohhh How do you like the Baja Claws on the Ranger??? I am thinking of getting them...need to know how they Mud and climb before I buy them

Here it is. finally able to post a pic.:rolleyes:

http://pavelow.homestead.com/files/crvw1.jpg http://pavelow.homestead.com/files/jay1.jpg http://pavelow.homestead.com/files/shot.JPG

http://bbs.off-road.com/wwwthreads_uploads/53-642474-Mvc-023s.jpg

First pic went dead.... F/R

Heres my tow rig, 80 F350 built 460,c6,1350, d51 front w/ lmt slp. d70 rear w/ locker. Since pic, I have put 265 75 16s and Alcoa powerstroke wheels on it.

Click Me (http://photos.yahoo.com/bc/pegalis1/lst?.dir=/My%20Photos&.view=t) to check out my rig. Ill be doing some trail photos soon, along with photos of the crap ill be working on to make a nice triangulated 4link coil sprung rear suspension. Oh joy!:beer:

My tow rig parked at ice house resort on our last trip to the con:eek:

Doah!! My Bronco, is apart again :rolleyes:

New pic

this outa work...sorry :confused:

in Moab on 35's

tellico with 36's

Here's one from last summer taken by Nobody.

http://classicbroncos.com/gallery/aclarsen10.jpg
http://classicbroncos.com/gallery/aclarsen11.jpg

Ok, I started the thread, guess I can finally get around to putting pics of my pig on here

more

http://www.members.shaw.ca/ajelicic/Images/Waiprous%20pics/J9-5.jpg
http://www.members.shaw.ca/ajelicic/Images/favorite%20pics/Waiprous%20-%20air2.jpg
http://www.members.shaw.ca/ajelicic/Images/favorite%20pics/clear%20creek%20%20-%20rockbed3.jpg
http://www.members.shaw.ca/ajelicic/Images/favorite%20pics/ranger%20rear%20flex.jpg

Yeah it's a TTB so it flexes like crap.

http://members.shaw.ca/steevil/Images/Specs%20Pics/ranger%20spare%20tire%20open2.jpg

New Pic, needs paint now..... From 44's to 35's :(

http://www.towerofyouth.org/UPLOAD/88.JPG

Gettn there...

Here is my '68 Bronco from a week ago.:D :D

My "New" Bronco.......Soon for sale
460
6" Superlift
Straight body
New Paint
Superrunner steering
Ladder Bars.....
Oops sounding like an add better Quit:D

My truck is still "Under Construction". To see how modified it was before I tore out the drivetrain to swap in some full width 3/4 ton axles and other mods, go to my site under "off-road".

link:
www.grapeapedesign.com

It's out of the shop (no front DS yet though)
http://grapeapedesign.com/Newtwist6sm.jpg

Dean

Here is my old Roan

Here is the Bronco
ps sorry about the poser shot it is all I have since my camera took a dive

79 Bronco

http://members.cox.net/ric4/41.jpg

UPDATE PICS

:nuke:

heres my 84 b2 , 6in lift and 33
just go to my web page
bronco ii (http://www.shifter.20m.com/)

My 2001 Explorer Sport Trac

Moab - May 2002 - Wipeout Hill - Photo Courtesy of Rick "Pumpkin Pilot" Horwitz
http://www.explorerforum.com/data/2/71P4292287-med.jpg

Broad Canyon, NM - October 2002
http://www.explorerforum.com/data/3039/410710120117.jpg

Here is my new tow rig.

hey gearrat whats goin on...BigBeastlyBronco here..sound familiar..your pic didnt show up...dead link maybe....heres my junk..since this pic i have taken off the front bumper...sway bars got a CB bla bla bla...this all happened in the past week...im makin a custom front bumper for the front and im also doin some fab work on a reese hitch i found so i can mount it to the front for a strong tow point..

heres my junk...once a beauty.now a scratched/banged up piece of crap

http://members.aol.com/rico1453/images/side.jpg

Here's my G-ride :) a.k.a. "crackedmybracketagain"

http://www.explorerforum.com/data/2/2199red1.jpg

I got a 81 f150 shortbox stepside with a 429 pushing 400 horse and huge torque with 9" of lift and 38.5 groundhawgs and a bunch of other mods and my 91 Ranger XLT 4L 4x4 as a daily driver and my 88 samurai on 16/35/15 boggers,coils,GTi motor , mods mods mods.
check em out at www.4byhigh.4t.com

Here is my newly acquired junk!:flipoff2:
1977 EB.
Detroits F & R (9 inch rear), 4 Inch lift, 302 with c4 auto tranny
Anything else is just bragging. :D:D:D

Amanda :cool:

One more. The rest are here:
http://photos.yahoo.com/bc/cali_kahuna/lst?.dir=/1977+Bronco1939+Ford&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/

here's what the finished product will look like.
70 eb (http://photos.yahoo.com/bc/killahoesrk1/vwp?.dir=/bronco&.dnm=finished+bronco+001.jpg&.src=ph&.view=t&.hires=t)
just need gears and I can test it out.
more pics (http://photos.yahoo.com/bc/killahoesrk1/lst?.dir=/bronco&.view=t)
buildup (http://photos.yahoo.com/bc/scottsbent70/lst?.dir=/70%27+bronco&.src=ph&.order=&.view=t&.done=http%3a//photos.yahoo.com/)

Hey Marlon, here's a resize for you.
I realized who you were as soon as I saw Shane in that pic LOL. I came to Bassi last october with you guys ( I was with Discooooooo) Good to hear from yah. You like my shiny new rig?? :D:D

Bronco pics (http://hometown.aol.com/seventynineford/page1.html)

Heres a few of my 79 Bronco converted to a pickup

http://www.meenahan.com/images/joshuatree/crw_0797.jpg

Being that this is my first posting on this site, here's an image of my '94 playing in the mining region of Old Dale near 29 Palms. This Ranger has taken me from Michigan to Toronto to Southern California to Cabo --- *And Back*. Peace out!

Badlands in September....

its changed a bit:rolleyes:

ok so i finaly figuerd it out ye haaaa!!!


http://www.pirate4x4.com/readersrigz/reader341.jpg

NT

NT

NT

NT

Going down hill

MUD YES!
http://www.northtexaspowerstrokes.com/members/mudsmall.jpg

After New Wheels and Tires.


http://www.northtexaspowerstrokes.com/post/NewWheelsandTires.jpg

ok here they are ...

Needs a SAS, bigger tires, and more trail incurred body damage, but, what the hell: http://www.bigblocksix.com/f100swb/f250/otr/rtfront.jpg

The two trucks that I started with when I put it together:
http://www.bigblocksix.com/f100swb/f250/leftfront.jpg

'Nother shot of the drivetrain/chassis donor: http://www.bigblocksix.com/f100swb/f250/rightrear.jpg

And, what had to be removed to make the cab fit:
http://www.bigblocksix.com/f100swb/f250/cabswap/IMG_0019.jpg

Don't give me too much greif about it not being lifted, still having TTB, and, having street tires, I built it in 100 hours because I needed a truck...
The TTB will soon be eliminated, along with the 13-45, which I kinda broke the chain in today... Oops...
Evan

I never got around to posting a pic of my POS with stock springs, and 31's Don't laugh too hard please

Here's my 71 bronco

Tazz

Here's my 72

My project pics

http://okcnetworks.com/bronco/frame/images/Frame_t.jpg

http://www.okcnetworks.com/bronco/body/images/P4290003.jpg

http://www.okcnetworks.com/bronco/body/images/P9300002.jpg

http://www.okcnetworks.com/bronco/body/images/P9300004.jpg

http://okcnetworks.com/bronco/408/images/P3110010.jpg

http://okcnetworks.com/bronco/408/images/P3110008.jpg

http://okcnetworks.com/bronco/408/images/PC130005.jpg

..

...

......

sliders

how they attach to the frame

shackle reversal

http://www.supermotors.org/getfile/86651/fullsize/tommy.jpg

http://www.supermotors.org/getfile/181587/fullsize/P1010164.JPG

http://www.supermotors.org/getfile/91430/fullsize/PA280135.JPG

My 76 Bronco

another

Here's one of my "Honda-Crusher."

Here is my new toy. Got her for $1500 from a poor sole that just wanted to get rid of it. Has the good ol 460 and am working on finding a front 60 to swap into it and then 42's are on the way.

It's coming around.

http://tellico.off-road.com/wwwthreads_uploads/1046417-New_lift_tires1.jpg

:usa:

Here is my puller truck, shes a F-350 V-10 Superduty 4x4 dually short box 6" lift, 39" Michelin, My bumpers front and rear, and getting ready for my new power stroke. G. :)

http://www.safarigard.com/Ford/Trucking-nat.jpg


http://www.safarigard.com/Ford/Trucking-nat_shocks.jpg

My other 4x4 toys are owned by Ford, but dont look it!

Anyway see you on the trail!

G.

My rig on my rig:D http://www.respite.org/images/cj66dean/towrig1.jpg
http://www.respite.org/images/cj66dean/towrig2.jpg http://www.respite.org/images/cj66dean/towrig3.jpg

My 1991 Bronco, 6" super lift. 35" bfg muds.

http://mywebpages.comcast.net/jon17/bronco2/bronco%20012.jpg

http://mywebpages.comcast.net/jon17/bronco2/bronco%20009.jpg

http://www2.freepichosting.com/Images/28852/8.jpg
old picture but........

http://mywebpages.comcast.net/jon17/mudbog/mudbog%20003.jpg

MUD BOG!!!!

http://forums.collectors.com/include/uploadbox/viewfile.cfm?files=broncoforsale%2EJPG

My 1986 Bronco

This is a newer shot with the 37" bead locked and the WAH

Here's my 77'.

And, here's what's doing all the work in the 77'.

What with me being a newbie and all. ???? Maybe this will work?

http://www.4xnurse.net/Bronco_Daze_050303.JPG

1977 Bronco (old pic)

http://classicbroncos.com/photos/data/500/6935025_22.JPG

http://classicbroncos.com/photos/data/500/6935026_23A.JPG

http://classicbroncos.com/photos/data/500/6935013_10A.JPG

HE LIKES TO GET MUDDY

http://www.superford.org/getfile/154017/fullsize/ojb90025.jpg
from this, to

http://www.superford.org/getfile/154035/fullsize/ojb90030.jpg
this

Various wheeling type pictures are here (http://www.supermotors.org/members/profile.php?user=cray_zhorse)
updated for dead link.

http://www.flexplorers.com/photopost/data/3002/3indiantrail_south-med.jpg

poser posing:p

i guess i should at least post once a year to keep from being booted.


heres one on a sissy trail at the badlands.





http://images.cardomain.com/member_images/12/web/216000-216999/216733_87.jpg



one from ken tuck aye
http://images.cardomain.com/member_images/12/web/216000-216999/216733_53_full.jpg

Posser shot of my 72 on the spillway at Loon Lake

Here she is on the trail now that I got 4x4 again...

The site for my EB (http://www.geocities.com/1969bronco/broncopics/index.html)

Heres mine...
http://members.cox.net/bigbadbronco/Bronco2.jpg
http://members.cox.net/bigbadbronco/Bronco.jpg

http://www.ford-trucks.com/user_gallery/displaygallery.php?userid=28589

Update....
Some actuall 'wheeling pics, unfortunatley all poser, can't drive and take action shots at the same time......
http://www.bigblocksix.com/f100swb/F250/wheeling/sioux%20mountain/powerline.jpg

http://www.bigblocksix.com/f100swb/F250/wheeling/sioux%20mountain/posinattop.jpg
One of the damn latches in my toolbox let go... that's what the spares are holding closed... and, yes, they are tied down...

http://www.bigblocksix.com/f100swb/F250/wheeling/sioux%20mountain/posinattop2.jpg
Not bad for a dead stock(well, minus 22" of wheelbase...) 3/4 ton... I really need more suspension flex though... the chassis flex is such that that drivers door isn't even thinking of closing.....
Leaf sprung TTB is junk...
And, we won't even mention those 265/75R16 AT's.... LOL
Evan

http://images.cardomain.com/member_img_a/417000-417999/417637_21_full.jpg

http://images.cardomain.com/member_img_a/417000-417999/417637_14_full.jpg



Project B2
http://images.cardomain.com/member_images/4/web/424000-424999/424105_2_full.jpg

http://images.cardomain.com/member_img_a/417000-417999/417637_40_full.jpg

http://www.bronkzilla.com/images/92603/DSCF2416.JPG

http://www.bronkzilla.com/images/103103/DSCF2704.JPG

http://www.bronkzilla.com/images/103103/DSCF2701.JPG

http://www.bronkzilla.com/images/110103/DSCF2714.JPG

All cabbed in
http://images.cardomain.com/member_images/7/web/283000-283999/283471_67.jpg

http://www.highboyz4x4.com/flameside.jpg

.jpg', 503, 308[/IMG] http://images.cardomain.com/member_images/12/web/432000-432999/432007_1_full.jpg

stuck in 2wd..

http://members.rennlist.com/jrod13/p1010227.jpg


high centered after follwing 40" bogger tracks..


http://www.sos.mtu.edu/4x4/arb/83003-RH/images/pic%20035.jpg

http://images.cardomain.com/member_images/8/web/428000-428999/428610_2_full.jpg


I haven't had a chance to wheel it yet, but I will as soon as I get done with the 302 swap.

Brian

http://www.photobucket.com/albums/1003/gearrat/c5eaa477.jpg

Prior to frame off rebuild

http://images.cardomain.com/member_images/8/web/404000-404999/404244_28_full.jpg

Eventually gonna have 6" lift and 35's. Aussie Locker in the front, not sure about the rear, since it has a traclock in it. Gotta rebuild the engine first though.

How about these from the new guy :D

http://home.zoomnet.net/~higz/sitebuildercontent/sitebuilderpictures/Trucks.JPG

http://home.zoomnet.net/~higz/sitebuildercontent/sitebuilderpictures/80790181vnehnv_ph.jpg

Cheers

heres mine

Heres my ranger. 33" xterrains. these are old pics so i have other stuff on ill post new ones later.

Andrew

http://images.cardomain.com/member_images/2/web/410000-410999/410567_5_full.jpg

http://images.cardomain.com/member_images/2/web/410000-410999/410567_12_full.jpg

here it is, bronco/f100

http://images.cardomain.com/member_images/3/web/351000-351999/351346_182.jpg
http://images.cardomain.com/member_images/3/web/351000-351999/351346_185.jpg

91 F150

http://www.ford-trucks.com/user_gallery/displayalbum.php?&userid=112502&albumid=7731

FTE - Idiomaticman
Pirate - CollegeBudgetFord

The pic was taken after the SAS. No action shots yet.

@ Barnwell Mountain Recreation Area near Gilmer, TX
http://www.explorerforum.com/data/2/410705170079.jpg

My two Exploders!
2001 Explorer Sport Trac 4x4 and 2000 Explorer Limited v8 AWD
http://www.explorerforum.com/data/3194/410709070011.jpg

http://images.cardomain.com/member_images/3/web/315000-315999/315211_19_full.jpg

http://images.cardomain.com/member_images/3/web/315000-315999/315211_42_full.jpg

Mostly stock, uncut, roller cam 302, L&L headers, Wieand Stealth, MSD.

http://www.chuckbrandt.com/up1.jpg
http://www.chuckbrandt.com/mud.jpg
http://www.chuckbrandt.com/headers2.jpg
http://www.chuckbrandt.com/chunk1.jpg

heres my rig.

http://www.texasoffroad.net/albums/members/albuo78/Clearer1.jpg
http://www.texasoffroad.net/albums/members/albuo78/DSC01145.jpg

Heres the lowdown: its a 1988 Ford Bronco II. 2.9L EFI V-6, 4x4, 4sp (od), 180K, 6" suspension lift, running 33" futura Dakota RVTs.

Holy crap all that hanging from the carb plate?:eek:

http://www.chuckbrandt.com/chunk1.jpg

My truck:

http://www.njfourwheelers.com/pictures/Halloween01/images/Dcp00636.jpg

http://img108.exs.cx/img108/5654/whitetruckredtruck002small4nq.jpg

http://img59.exs.cx/img59/2478/whitetruckredtruck0010yp.jpg

-cutts-

Here are the new tires
http://www.phillippi.us/pics/newtires2.jpg
So far very good on road and great in the limited off road I have done.

this is my rig
http://www.superford.org/getfile.php?id=108824&toggle=fullsize&f=rti_08[1].jpg[/IMG]
http://www.superford.org/getfile.php?id=108748&toggle=fullsize&f=bronco cleaned up.jpg[/IMG]

Heres my pride and joy...

2003 F350 5.4V8
-Hypertech programmed
-K&N FIPK
-Hi-Flow magnaflow cat
-Flow master 2 chamber (side exit)
-8" BDS all spring suspension lift
-38.5x14.5x16.5 TSL SX
- useless exterior mods, like grille, lights, blackouts, tint.. ect ect

COMING SOON - 4.88 gears, cross over steering, dif. guards, shackles, 42s.http://www.superford.org/getfile.php?id=113153&toggle=fullsize&filename=Nose.jpg

My beater F-150:

http://mav.wastegate.net/images/F150 Beater 2.jpg

My F-250 cab off project:

before
http://mav.wastegate.net/images/before.jpg

currently
http://mav.wastegate.net/images/now.jpg

best I can do is a link

http://www.superford.org/registry/vehicles/detail.php?id=2112&s=17273#content

Mine is the blue one

Before My teardown:
http://tellico.off-road.com/wwwthreads_uploads/1291210-IM000304.jpg
As it sits now frame extended in the front with a rear leaf pack and D60
http://tellico.off-road.com/wwwthreads_uploads/1291211-IM000503.jpg
I have WFO concepts high steer arms on order and should get them in the next few days. These arms will enable me to run my drag link to the front over the leaf pack and my tie rod behind the axle. I can't wait to get it all together. I'll be getting my linkages next month. My budget allows me to go one small step at a time. :) Take Care. NORM

Here is my F-150 on a glacier trip - ARB air lockers, 38 inch mudders, air suspension in the rear.



http://www.4x4offroads.com/image-files/jan04-skjaldbreidur-thorisjokull-geitlandsjokull.jpg

A work in progress.........

New here...figured I'd chime in and show you all what I'm starting out with:

Http://www.superford.org/getfile.php?id=111126&toggle=fullsize&f=Bronco8.jpg

Just yanked the motor out last weekend and have started the breakdown. Its also now gutted, no seats, panels, or carpet. Herculiner on the way to make sure it doesn't rust. Bought it from California for 500 bucks so its a peach out here in Utah without any rust, gonna try to keep it that way. After the motor gets rebuilt then the tranny goes into the shop. Then paint, lift and tires are to follow...then after that she'll get some dents, scratches, and mud coats.

http://www.superford.org/getfile.php?id=90365&toggle=fullsize&f=100_0210a.jpg
my junk

Here's my addiction......HP60 going in.... dumping 4.10's going to 4.88...losing limited rear and finally locking ...as for the bed.......I wish I'd already learned to weld (on someone else's rig)!!

My 88w/D44 front, 9"rear. 4.10 for now, wish I'd gone with 4.88 the first time aroundhttp://images.cardomain.com/member_images/6/web/450000-450999/450096_62.jpg

http://images.cardomain.com/member_images/6/web/450000-450999/450096_80.jpg

heres the old ford
http://www.claycounty4x4.com/images/P4240043.JPG

that didn't work too well

here is a pic of my ford. its my first ford and it is my favorite truck i have ever had!!!! (http://www20.brinkster.com/a2ba213b/ford.html)

pismo:
http://www.superford.org/getfile.php?id=116333&toggle=fullsize&f=.jpg
old sluice:
http://www.superford.org/getfile.php?id=126304&toggle=fullsize&f=.jpg
hollister:
http://www.superford.org/getfile.php?id=109497&toggle=fullsize&f=.jpg
cadillac:
http://www.superford.org/getfile.php?id=126075&toggle=fullsize&f=.jpg

Well here it was 2 weeks ago!

And here it is 2 weeks later :p

Two weeks ago:
http://www.broncoholics.com/support/files/scotty/20040522162640_IM001707.JPG

Two weeks later:
http://www.broncoholics.com/support/files/scotty/20040512001109_IM001681.JPG

:flipoff2:

My rig and 350 mile-a-week daily driver.
http://www.supermotors.org/getfile.php?id=115052&toggle=fullsize&filename=26-Mar-04.jpg
http://www.supermotors.org/getfile.php?id=115057&toggle=fullsize&filename=Lynn_02.jpg
http://www.supermotors.org/getfile.php?id=112410&toggle=fullsize&filename=MR-4.jpg

Here's mine.
http://www.supermotors.org/getfile/197286/fullsize/Cab3.JPG
http://www.supermotors.org/getfile/168301/fullsize/frontend.JPG :grinpimp:
Gonna strip'er down and rebuild it from the ground up. Between the two should have 1 good truck.

My 85 E350 4x4 van. Has a fairly beefy 4x4 conversion done by
some colorado company, and a gas 460. Id eventually like to
convert it to a higher travel susp.

Already got rid of the lightbar & other red & blue lenses. Local cops
didnt like my exempt utah plates either... :evil: They were kinda
pissed the Fire Dept left all the stuff on it when they sold it.

Had to remove all the fire dept & ambulance lettering also.
Thinking about all one color, maybe dark green or that camo stuff...
The red & white is cool also, but attracts too much attention...

The thing is huge, I hate driving it in traffic... It does hold my
KLX 400, Ocean Kayak, and a bunch of mountain bikes though.

Now I just need a lot more money to throw at it... :D

http://www.mindspring.com/~onone/E350A.JPG
http://www.mindspring.com/~onone/E350B.JPG
http://www.mindspring.com/~onone/E350C.JPG
http://www.mindspring.com/~onone/E350D.JPG

:D Here's mine.
Cummins 4bt
4.88's locked
th400 dana 20
38 tsl's

in the Rubicon

Predator, AZ
http://emotoman.com/keith/images/kea_predator0535.jpg

Metal Masher, UT
http://emotoman.com/moab2004/keith/metalmasher/images/IMG_0359.jpg

photos courtesy of Keith Auble http://www.rockmodified.com

Oh hell, I'll play . . . Here's my $700 special

'69 F100 - 360 - NP435 - and the biggie - Dana 21 transfercase. This one will never see the Rubicon - Desert wheelin' only. Right now I'm gathereing up the stuff I need for restoration and upgrades.

It's not much but it's a start.
http://memimage.cardomain.com/member_images/11/web/419000-419999/419082_15_full.jpg http://memimage.cardomain.com/member_images/11/web/419000-419999/419082_27_full.jpg

http://memimage.cardomain.com/member_images/3/web/459000-459999/459781_48_full.jpg

too stock as of now, but theres a no slip on the way for the rear, 4" of lift and 33x12.5s and 4.30s in its future.

http://home.bluemarble.net/~n9emz/Miscellaneous/merig.JPG
http://home.bluemarble.net/~n9emz/sonspaint/fronty1.JPG
http://members.aol.com/n9emz/FatSon.JPG
http://home.bluemarble.net/~n9emz/Latest%20Trailer%20Score%2005/LRTrailer.JPG

Update and new image
http://broncograveyard.com/images/readers/image_585f.jpg

Rebuilt 2.9L V6: World heads, JBA headers, Camcraft cam, Accel injectors, custom K&N cone

Rebuilt Mitsu. FM146 5 Speed

BW 1350 manual T-Case

HP Dana 44; 4.56, Detroit, Warn hubs

Currie Ford 9" w/all the goodies-4.56, full spool

~6" EB coils in front, Skyjacker leaves in rear, wristed arm, 3" Body

38.5" X 15" Ground Hawgs on 15X10 Eagle alloys

Working on C5 auto and 203/Dana 20 doubler swaps.

http://www.supermotors.org/getfile.php?id=99362&toggle=fullsize&f=.jpg

My two '78's.....

http://img.photobucket.com/albums/v99/jackhart/paragon%20summer04/paragon27.jpg

http://img.photobucket.com/albums/v99/jackhart/witc04/witc41.jpg

96 FSB

update pic, now on one-tons!
just waiting on gear change before i put the meats on,
http://www.supermotors.org/getfile/147427/fullsize/won%20tons%20040.jpg
EDIT: first trail pics, new leafs work good! (better than the TTB anyways)
http://www.superford.org/getfile/156317/fullsize/TSF%2010-7%20038.jpg

better front end shot.
http://www.superford.org/getfile/156325/fullsize/TSF%2010-7%20042.jpg

http://memimage.cardomain.net/member_images/5/web/665000-665999/665735_7_full.jpg
http://memimage.cardomain.net/member_images/5/web/665000-665999/665735_9_full.jpg
http://memimage.cardomain.net/member_images/5/web/665000-665999/665735_10_full.jpg
http://memimage.cardomain.net/member_images/5/web/665000-665999/665735_16_full.jpg
These are some pics from Rubicon over Labor Day weekend. I got there and nobody was there, where was everybody?

All my old pics are red x's now :(

Here's a recent one

http://beer.thisdysfunctional.org/forum/attachment.php?attachmentid=914&stc=1

BEFORE PIC! (AFTER PIC -COMMING SOON - DEC 8TH 2004) :flipoff2:

Update:

Booty-fab'd bumpers

http://www.troybaker.com/bronco/rockdust10.jpg

Tow Rig:
http://memimage.cardomain.net/member_images/3/web/627000-627999/627106_3_full.jpg

Here's a picture of the finished exterior. All I have left is exhaust, driveshafts and the interior.
http://memimage.cardomain.net/member_images/5/web/701000-701999/701186_64_full.jpg
Heres a link to my site.
Marine Bronco II (http://www.cardomain.com/id/marinebroncoii)
Sign my guest book and rate it please.

http://www.pirate4x4.com/forum/attachment.php?attachmentid=157512&stc=1

poser shot (cause that's what it is)

http://home.naxs.com/dogman/Finally2.jpg

poser shot (cause that's what it is)

http://home.naxs.com/dogman/Finally2.jpg
got more details on the suspension on that thing?

wes

My tow rig ... which is currently for sale...

Having some fun in the driveway :D

My truck (http://pg.photos.yahoo.com/ph/angeredchild69/detail?.dir=547c&.dnm=1a59.jpg&.src=ph)
this is my project truck.
83 f250, 6.9 IDI diesel, T-19, dana 61 rear with 3.05 gears.


my plans are hp60 in front, 60 welded in rear, with 4.10's and 36's.

already got the hp60 for 250 bucks with springs and spring hangers

The Beast (http://www.supermotors.org/registry/vehicles/detail.php?id=6624)


Heres my 1990 Bronco. Loves the mud. I hope to get 1 ton axles in the future. I wish I could find a dana 60 front for $250 like ford 69 did.

http://img.photobucket.com/albums/v222/wheedle/truck/DSCF1842.jpg
http://img.photobucket.com/albums/v222/wheedle/truck/DSCF1844.jpg
I actually got her up on the top block, but the parkign brake wouldnt hold her up there.
79 F150, 460 , C6 , NP205 , Ramsey 12k worm drive.
Hopefully get some wheeling shots here soon.

86 Bronco XLT - pics from Wheelin In The Country

http://members.papadocs.com/iane/bronco/resized/bronco-2.jpg

http://members.papadocs.com/iane/bronco/resized/bronco-1.jpg

http://members.papadocs.com/iane/bronco/resized/bronco-3.jpg

460 recently installed.

http://members.papadocs.com/iane/bronco/460/460-2.jpg

Jus thought I would show some updated pics of the rig while I am moving the truck up to the driveway since it's supposed to snow tonight, and I don't want to get my buddies truck and a trailer stuck in the backyard trying to get my truck out so we can take it to work, but here is the truck seeing daylight for the second time since the beginning of the project. In the process of making a deal for some 6" XJ coils for the front.

Here's the pics

http://img.photobucket.com/albums/v244/LNranger05/Build-up%20Flex%20Pics/Picture201.jpg

http://img.photobucket.com/albums/v244/LNranger05/Build-up%20Flex%20Pics/Picture202.jpg

http://img.photobucket.com/albums/v244/LNranger05/Build-up%20Flex%20Pics/Picture203.jpg

http://img.photobucket.com/albums/v244/LNranger05/Build-up%20Flex%20Pics/Picture204.jpg

http://img.photobucket.com/albums/v244/LNranger05/Build-up%20Flex%20Pics/Picture205.jpg

Seeing it in full in the daylight, gives me the motivation again to get er done again.

Brian

here are some assorted pic of my 75 Bronco
http://www.pirate4x4.com/forum/attachment.php?attachmentid=162972&stc=1 http://www.pirate4x4.com/forum/attachment.php?attachmentid=162973&stc=1 http://www.pirate4x4.com/forum/attachment.php?attachmentid=162974&stc=1 http://www.pirate4x4.com/forum/attachment.php?attachmentid=162975&stc=1

My new project "SPOT" I'm just starting on, a 78 Bronco on 32's. Parts already stockpiled are 36" IROK's and a rear Detroit, just ordered a Sky rear shackle flip, rest of the lift arrives free in January courtesy of Superlift... The I start building a D60 ft/ 14B FF rear so when the 36's wear out I'll have something that will hold together under 42's. Currently looking for a 73-77 F150 grille to swap on..

here is where my winter project is now

here are a few more pics.
specs.
73 bronco frame and drive train
304/c4/d20
9 inch 31 spline 4.56s with mini spool
d44 ford disk brakes, waiting for 4.56s, detriot, and warn shaft
deaver springs
it will be topped off with a ranger cab and flatbed.
still waiting on a new set of 36" Iroks

Just found the forum recently and thought I'd share my project with everyone:

http://www.michaelnetherton.com/pr-photos/10-04-04_01.jpg
http://www.michaelnetherton.com/pr-photos/10-04-04_03.jpg
http://www.michaelnetherton.com/pr-photos/10-04-04_05.jpg

The website is: Firefighting Ford (http://www.projectresponder.com)

just found the board by way of trailkrawlers4x4.org and netruckenthusiasts.com. my rig is a 2000 Ranger 4x4 OFF ROAD. 4" Superlift w/ 33x12.50 mudders on 15x7 Eagle Rims. Baja sytle spare tire rack. Shittybuilt push bar w/2 6" Eagle Eyes. Euro tail and clear corners. Cat-back exhaust system, soon to have a high flow cat installed. Pioneer Premier deck w/2 12" RF subs and a mono block 150 RF amp.
here are a couple pic:
http://memimage.cardomain.net/member_images/5/web/353000-353999/353819_69.jpg
http://memimage.cardomain.net/member_images/5/web/353000-353999/353819_70.jpg
http://memimage.cardomain.net/member_images/5/web/353000-353999/353819_71.jpg

ken

[IMhttp://img147.exs.cx/img147/6907/dsc010836fy.jpgG]

http://img40.exs.cx/img40/39/dsc003853fn.jpg]
Thank yall this was the bronco when I got it in May had been sitting over 10 years. It still isnt anything special but getting there.I had it ready for windrock in September after a long summer.Put on a lift,added power steering,new bushings motor mounts etc.,all brake parts,lots of seals,seats,5 point belts,cage bummpers, tire rack,winch,minni spool in rear,welded the front 30 (thought it would brake the first trip but still together)looking for a 44 with disc,. Gave the stock 6 a good tune up and new radiator (she runs great but is weak and is on the next to be changed list).
I hoped to be further along but all the small stuff added up.But atleast I have it going and have got to take it out a few times (it hasnt broke on the trail yet and has been a blast to wheel).So Iam going to keep wheelin it while I gather parts.

The little red bronco that grew and grew till it didn't fit in the garage anymore!
unfortunately, a drunk driver totaled the rig a year and a half ago.

http://img55.exs.cx/img55/5529/jump2vd.jpg

Ok, here are my two Broncos

1983, Tuff Truck,
http://www.supermotors.org/getfile/115137/fullsize/before7.jpg

1984 Bronco,
http://www.supermotors.org/getfile/163668/fullsize/bko6.JPG
http://www.supermotors.org/getfile/85022/fullsize/Flex3.jpg

http://img.photobucket.com/albums/v244/LNranger05/Build-up%20Flex%20Pics/Picture203.jpg

Fuck TRS, dont pimp that poser shit here.. :evil:

http://www.explorerforum.com/data/500/9352l10.JPG
http://www.explorerforum.com/data/2/9352l3.JPG
http://www.explorerforum.com/data/500/9352Ava-med.jpg

Here is my little 4b. Too bad I can't find any info on what mods are possible apart from the bodylift and rear springs (done after the first photo was taken)that I have already done. It is a badge engineered wagon version of a Mazda B2600.

Bigger tyres are coming....

http://www.users.tpg.com.au/nev62/images/raider01.JPG
http://www.users.tpg.com.au/nev62/images/raider02.JPG
http://www.users.tpg.com.au/nev62/images/raider03.JPG
http://www.users.tpg.com.au/nev62/images/raider04.JPG
http://www.users.tpg.com.au/nev62/images/slider01.JPG
http://www.users.tpg.com.au/nev62/images/slider02.JPG

Here's a couple that were taken November of 2004
http://www.supermotors.org/getfile/170268/fullsize/camo2.jpg

http://www.supermotors.org/getfile/170266/fullsize/camo4.jpg

A before and now shot of my 75 Bronco. I've had it one year. In the next two months it will have a C4 rebuild, 203/D20, new front axles, sliders & bumpers. Should be ready when the Con opens. :shaking:

http://img106.exs.cx/img106/4523/1975broncobeforepictures0018lw.jpg

http://img106.exs.cx/img106/808/1975broncobeforepictures0584ed.jpg

urban wheelin :rolleyes:
http://img106.exs.cx/img106/8080/944336638711005020dr.jpg

Cople of action shots - Kentucky wheeling...

http://www.explorerforum.com/data/2/15014Explorer_Flex_1.jpg

http://www.explorerforum.com/data/2/15014Explorer_Flex_2.jpg

before
http://www.supermotors.org/getfile/172139/fullsize/mikebefore.jpg
after
http://www.supermotors.org/getfile/165296/original/bronco.jpg
http://www.supermotors.org/getfile/155676/fullsize/100_0508.JPG

http://www.supermotors.org/getfile/92632/fullsize/Oct01414.JPG
http://www.supermotors.org/getfile/96612/fullsize/pbbp29.JPG
http://www.supermotors.org/getfile/168929/fullsize/ponyboy1qf.jpg

here is the best pic of my junk to date....

look closely......lol
http://memimage.cardomain.net/member_images/10/web/502000-502999/502259_72_full.jpg


and I know the response I'll get, since it's stock...but it can rockcrawl too :flipoff2:

http://memimage.cardomain.net/member_images/10/web/502000-502999/502259_67_full.jpg

well i got some pics here somewhere...but kinda old. now that it has a body you can kinda tell its a ford. so here some new pics.

http://www.supermotors.org/getfile/107146/fullsize/EVMP0531.JPG Heres the 79

this is my 1996 explorer limited (4x4). i've owned it for about a year, although i just started working on upgrades.

i am currently having a custom front bumper with winch, roof rack, light bar, and tube sliders made, which should be finished within the next month.

future mods:
4.10 or 4.56 gears (3.73 currently)
selectable locker up front
spring over axle in the rear
either SAS or IFS lift kit up front

http://memimage.cardomain.net/member_images/7/web/763000-763999/763875_3.jpg
http://memimage.cardomain.net/member_images/7/web/763000-763999/763875_5.jpg
any other ideas for future mods? todd.

more pics at : http://www.cardomain.com/id/toddious

Here is a pic of my 1992 SAS Explorer and a list of the mods done to it.

I have new hiem jointed steering links on order and a set of BTF Krypto Diff Covers. I recently received my new trackbar mount and hiem jointed track bar. So I have some work to do on all of these rainy weekends.

http://www.explorerforum.com/truckhaven_2005/IMG_1145.jpg

More pics in My Photo Gallery (http://www.explorerforum.com/data/showgallery.php?cat=500&ppuser=12913) and for a full write up on the truck follow the link in my sig.

had to put this on on here this was this past weekend
http://www.supermotors.org/getfile/177678/fullsize/100_0681.JPG

http://www.rufustheram.tqhosting.com/pics/bolton/bolton.jpg
http://www.rufustheram.tqhosting.com/pics/bolton/bolton2.jpg
http://www.rufustheram.tqhosting.com/pics/bolton/bolton4.jpg

Here is the few wheeling pics I have. I never can manage driveing and takeing pics.



http://www.supermotors.org/getfile/164621/fullsize/101_0839_0163.jpg




http://www.supermotors.org/getfile/164609/fullsize/101_0828_0152.jpg

http://www.supermotors.org/getfile/128278/fullsize/stuck%20%20deep.JPG http://www.supermotors.org/getfile/129488/fullsize/001_X.JPG Its now being completely changed to 6" lift coil overs , Cut & Bent TTB Etc!!!

http://www.supermotors.org/getfile/146423/fullsize/Cam%201.JPG

This is my 71 Bronco. i just got it in aug and have been working on it ever since. basics- 3.5 WH lift 33's and have and planning on swaping tranny for my NP 435 and i also have a NP 205 Transfer case. o ya can any one give me some info on that project?
http://img.photobucket.com/albums/v131/SrKyAaTnE4162/538f2abf.jpg

here is my junk.

http://classicbroncos.com/photos/data/500/6975PC030024.JPG


:flipoff2: :flipoff2:

This rig is for sale.....see post http://www.pirate4x4.com/forum/showthread.php?t=334016

http://www.extremeoffroaders.com/photos/fling03/images/Dsc00571_jpg.jpg

Hey yall i'm new to this board. I just thought id post a picture of my rig. Its a 95 302. 6 inch superlift, still have the blocks in the rear about to put sky shackles in. And hoping to have finished the d44 sas by the end of the summer. The bumper is welded on, i had to fab a 78 bumper to fit my frame. And its got a warn 10,000 in it.
http://www.supermotors.org/getfile/171090/fullsize/Picture%20221.jpg

Here's my '76 new project.....looking for 35's...
Doc

Thanks Icebreaker88, it was on a wooden bridge at Tellico--not as abrasive (sp?) as pavement--lol

I'll try this again, here is before:

http://i3.photobucket.com/albums/y62/muddevils1/HOOPTYWGN/BYRON11.jpg

http://i3.photobucket.com/albums/y62/muddevils1/HOOPTYWGN/BYRON12.jpg

http://i3.photobucket.com/albums/y62/muddevils1/HOOPTYWGN/BYRON13.jpg


and now:

http://i3.photobucket.com/albums/y62/muddevils1/HOOPTYWGN/byronsbronco017.jpg

http://i3.photobucket.com/albums/y62/muddevils1/HOOPTYWGN/byronsbronco004.jpg

http://i3.photobucket.com/albums/y62/muddevils1/HOOPTYWGN/byronsbronco007.jpg

http://i3.photobucket.com/albums/y62/muddevils1/HOOPTYWGN/byronsbronco008.jpg

I'll try and get some new ones soon.

--Thanks, Byron.

http://img.photobucket.com/albums/v384/joe_and_jeep/bronco5.jpg

1979 Bronco, 400, NP435, Rear 60, Front 44, Rust, 38in TSLs and the other normal crap. I also have a SOA YJ on D44s and 33s but I dont think the Ford Forum is the best place to post a pic.

http://www.geocities.com/schaanman/broncowhoops.JPG http://www.geocities.com/schaanman/broncowhoops.JPG

A More Current pic of my Blanco!
http://www.supermotors.org/getfile/190363/fullsize/001_00A.JPG

http://www.supermotors.org/getfile/197682/fullsize/webwheelerfilm2.gif

This is my baby, lots more mods to come though...

http://im1.shutterfly.com/procserv/47b5da11b3127cce9131d9446a4600000016108AatGrFq1auH

http://im1.shutterfly.com/procserv/47b5da11b3127cce9131df656a6400000016108AatGrFq1auH


'70 f-250
*dual flowmasters
*K&N
*Edelbrock intake/Carb
*35" boggers
*rebuilt 360
*hpd44/60
*funky/homemade bed/bumpers
*2-4" lift (not sure what, whatever it is is home made by the guy I bought it off of
*4:10's

Done quite a bit to it since I got it, but it has a hell of a lot more comin!

hey all, finally decided to check out pirate.

here is my 88 bronco as i left it when i deployed.
http://www.supermotors.org/getfile/154715/fullsize/IMG_1609.JPG
that was after it had been like this
http://www.supermotors.org/getfile/154476/fullsize/IMG_1599.JPG
http://www.supermotors.org/getfile/154510/fullsize/IMG_1602.JPG
http://www.supermotors.org/getfile/150767/fullsize/IMG_1489.JPG
because of the creek, the bronco lost its DD status and is just my toy now....so when i get home I have a set of 36" SXs waiting for me, rock sliders, rear bumper, hopefully a front bumper cam...im waitin, and a few more mods to include fender trimming and a fresh rattle can paint job

http://www.tmobilepictures.com/photos/photo10/09/7e/00bc10ffc89e.jpg?_rh=1ui4ow1xzvj62ov7bwf1vkr37
Im new to this board.. I just bought a 95 F-250 4x4 with the 7.3 Deisel in it. I plan to add about 4-5 inches of lift and hopfully 35's.

here is my new baby . i just got her about 3 weeks ago.
full lockers. 38.superswampers. 351. auto

http://img259.echo.cx/img259/4889/10012869hp.th.jpg (http://img259.echo.cx/my.php?image=10012869hp.jpg)

http://img259.echo.cx/img259/870/10012892wj.th.jpg (http://img259.echo.cx/my.php?image=10012892wj.jpg)



http://img259.echo.cx/img259/4084/10012923ou.th.jpg (http://img259.echo.cx/my.php?image=10012923ou.jpg)

........

Not really a full on ford but close enough
Ford ranger hood and grille
Mustang 5.0
C6
Atlas
Ford Hp D60
Rockcrusher D60
http://img265.echo.cx/img265/9518/122branik8df.jpg

http://img285.echo.cx/img285/5125/122buggy28et.jpg

http://img285.echo.cx/img285/4359/werock0026gn.jpg

Here are a few recent ones.

Before the swampers...

http://homepage.mac.com/chaosma/Bronco1.jpg

Here's the tow rig and the trail rig on the switchback to Poison Spider Mesa last year (one of my favorite pics). Theres a story behind the it but thats for another day. :D

http://i18.photobucket.com/albums/b116/svensett/Bronco/IMG_0207.jpg

Wheelin the DD.

here's mine, almost ready for paint and cage


edit, how the hell do you get the pics to actually show up? :confused:
http://www.pirate4x4.com/forum/attachment.php?attachmentid=193245&stc=1

http://www.pirate4x4.com/forum/attachment.php?attachmentid=193252&stc=1

http://www.supermotors.org/getfile/215957/fullsize/bumpers%20and%20sliders%20017.jpg
http://www.supermotors.org/getfile/215956/fullsize/bumpers%20and%20sliders%20016.jpg
heres some of my rig hope this works

Here are a couple pics of my Bronco
http://www.supermotors.org/getfile/209395/fullsize/IMG_0130.JPG
http://www.supermotors.org/getfile/209397/fullsize/IMG_0131.JPG
http://www.supermotors.org/getfile/209399/fullsize/IMG_0132.JPG
http://www.supermotors.org/getfile/186059/fullsize/Picture%20184.jpg
http://www.supermotors.org/getfile/186060/fullsize/Picture%20185.jpg
http://www.supermotors.org/getfile/185147/fullsize/IMG_0041.JPG
http://www.supermotors.org/getfile/185160/fullsize/IMG_0054.JPG
Pretty good for a 16 yearold to build huh.

My Superflex coils are coming and I already have some superflex leafs to put on. Lifting it 3" :)

Here's a few of my van.
http://alaska4x4network.com/attachment.php?attachmentid=4432&stc=1

another

http://i5.photobucket.com/albums/y190/sbschaefer/Meet%20and%20Greet/MeetGreet2005134.jpg

I just signed up, so I figured I'd share some photos of my rig with ya!
http://www.superford.org/getfile/196813/fullsize/119-1962_IMG.JPG
http://www.superford.org/getfile/208892/fullsize/406683_231_full.jpg
http://www.superford.org/getfile/217060/fullsize/172-7243_IMG.JPG

It's pretty much just for towing my trailer, but i thought id add to the pic collection! :cool2:

http://members.dslextreme.com/users/uploadsix/images/new%20truck%20029.jpg