PDA

: will this hoop work with my cruiser?...dogwalker youll know

DCruiser138
11-06-2001, 12:32 PM
this would make a nice adition to my cruzah. good price, but people like jeff, andy, youve seen my cruiser. would this work on mine? i dont wanna buy it if it will cause any probs. just a thought...
COMPLAINE
11-06-2001, 07:15 PM
Dustin:

are you talking about the front hoop? The element I would watch for is how will it attach to your frame - will it attach the same way - Ryan has a custom shackle reversal - is that compatible with the way your rig is set up? You might wind up having to modify it to make it fit. Otherwise, Ryan builds good stuff, and it looks to be a good design, therefore it could be a good deal for you. Ian
71RCKCRZR RYAN
11-06-2001, 07:51 PM
THE BOTTOM WINCH PLATE IS COMPLETLY FLAT......DOES NOT INTERFERE WITH SR.....WHERE THE TWO FRAME HORNS STICK OUT OF THE FRONT....IT MOUNTS RIGHT ON TOP OF THOSE....USES THE HOLES FROM THE STOCK TOW HOOKS THEN TWO MORE.....IF NEEDED YOU COULD PUT SPACERS TO SPACE THE PLATE UP HIGHER IF YOU NEED CLERANCE FOR A SAG BOX OR SOMETHING......ITS HELD ON BY FOUR1/2" BOLTS ON EACH SIDE.....I DONT THINK THE SPACER WOULD WEEKEN THE WINCH MOUNT WITH THOSE 4 BOLTS ON EACH SIDE.....CONSIDERIND THERE IS ONLY 4 3/8"BOLTS HOLDING ON A 9500LB WINCH
dog walker
11-06-2001, 08:27 PM
Should work fine with some slight mods.

Jeff
DCruiser138
11-06-2001, 09:04 PM
so ryan..its got a winch plate too? is it only for certain winches? i just bought one from bob roggy. dont remember the model, its a warn. the large ass one:P. thanks!
71RCKCRZR RYAN
11-07-2001, 12:33 PM
yup winch plate also........i have a hs9500 on there ....not positive of the bolt patturn though
wngrog
11-07-2001, 03:43 PM
Originally posted by DCruiser138
so ryan..its got a winch plate too? is it only for certain winches? i just bought one from bob roggy. dont remember the model, its a warn. the large ass one:P. thanks!

Holy shit, someone took Ryan's F'ing Caps lock off when he was not looking! :beer: to them!!

:D

:flipoff2:
71RCKCRZR RYAN
11-07-2001, 05:06 PM
WHAT I MEANT TO SAY WAS....................

YUP WINCH PLATE ALSO........I HAVE A HS9500 ON THERE.....NOT POSITIVE OF THE BOLT PATTURN THOUGH

:flipoff2: :flipoff2: :bounce2: :bounce: :bounce2: :bounce:
COMPLAINE
11-07-2001, 05:17 PM
Originally posted by 71RCKCRZR
yup winch plate also........i have a hs9500 on there ....not positive of the bolt patturn though

Haha, Busted - your caps key works :flipoff2: