|
willy78FJ40 02-05-2003, 08:14 AM what's the best source for front wheel and knuckle bearings? I called Toyota--- too much money. NAPA is cheaper but I want to know who's bearings they sell (I'll call them today) anybody else Ii should call? I'm just north of seattle cruiserbrett 02-05-2003, 09:11 AM I have had good luck with pepboys. they are cheap, and every one I have order turned out to be a koyo bearing, same as oem toyota. -Brett Landpimp 02-05-2003, 09:24 AM I have found the CR(Chicago Rawhide) bearings are the same as OEM, they are Koyo's and about 1/3+ the price. I haven't found knuckle bearings for much less than Toyota price of $20 each bearing and race. Well maybe a bit less but they were TRW's I think, I went with OEM Koyos from the dealer instead I get my brake and bearing at South Side Brake and Clutch in Tacoma but I think they have shops up your way(Seattle right?) Every CR bearing I have used came in a CR box but a baged Koyo(OEM) was inside :) John H euclid42 02-06-2003, 02:02 PM There are 2 shops in my town that sell bearings, under bearings in the yellow pages. Called last week. They can get all Timkin bearings, each under $15. I used Morgan's bearing number list ( Here (http://www.birfield.com/~morgan/tech/axle/index.html) ) to get the prices. StreetRodCruiser 02-07-2003, 08:58 AM http://jtoutfitters.zoovy.com/results.cgis?catalog=&keywords=knuckle+bearing http://jtoutfitters.zoovy.com/results.cgis?catalog=&keywords=wheel+bearing | |