ok

i am thinking of a custom dash for the YJ

i like the Avalanche one, but their site is all Fed up and i am guessing its a pretty penny

i found this one on ebay but it looks kinda cheesy

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2403232278&category=33695

anyone else know of any ideas for this?

thanks

I plan on using a flat pieace of stainless, killing the glove box and angling the speedo gas oil and temp towards the driver with a slight angle......................ltr

thanks

that is what i am thinking of too

I will be building mine in a few weeks. I'm doing it out of 4'x1' 3/16 aluminum. I have a few pieces sitting around. I'm going to angle the gauges out and towards the driver a bit...Like avalance's

Quinn,
Since you have a few peices, build me one too, and I'll come pick it up along with my tube fenders, shock mounts and shocks.. :) You can throw it in free of charge :flipoff2: :D
Scott

Sounds like a deal to me:flipoff2:

hi,this is not a complete dash replacement but i think it sure is a great upgrade.i was able to change all of gauges for autometer white face gauges (oil,fuel,temp.volt,clock) and my dash looks great.i retained glove box,upgrade took less than two hours. i used a kit found on e-bay.pictures,no cutting or drilling.
critterbill

road signs make excellent dashes..

Originally posted by critter777
hi,this is not a complete dash replacement but i think it sure is a great upgrade.i was able to change all of gauges for autometer white face gauges (oil,fuel,temp.volt,clock) and my dash looks great.i retained glove box,upgrade took less than two hours. i used a kit found on e-bay.pictures,no cutting or drilling.
critterbill

What are you talking about here???

Thanks

Stainless looks really nice when done well, but I'd go against it, I had one in my CJ5, DAM that was hard to put a few extra holes in once it was up.

You've got a YJ right?
Personal I'd sawp out to a CJ dash and run autometer gauges...

I was thinking stainless to prevent bi metalic corrosion, but alummuim whould be much easier for me to get, should I even worry about the corrosion ?????????????? ..................ltr

I also found this from the fabircatior it looks nice

http://www.pirate4x4.com/forum/showthread.php?s=&threadid=85778&highlight=custom+jeep+dash


.............ltr

That custom one looks sweet!!

You could make it yourself cutting the holes out with a rotozip or a dremel or a circlular saw since the gauges cover the edges...

But those ones sure are perfect!!

That's my next next mod - a custom YJ dash :)

Damn gauges cost $$

A guy in my club recently did this.....
http://coloradok5.com/photos/data/500/5303right_side_dash.jpg
http://coloradok5.com/photos/data/500/5303left_side_dash.jpg
You might like something like that. It was a custom job by Grady's in Sacramento... I know too far for you, but it looks like an awesome idea to copy for your application... :)

Originally posted by misfitcj
I was thinking stainless to prevent bi metalic corrosion, but alummuim whould be much easier for me to get, should I even worry about the corrosion ?????????????? ..................ltr

you mean electrolisys (sp?)? Use double sided tape to keep everything from moving around, and pop rivet or screw the dash material to whatever your supports are. You can also lay down a small bead of silicone, but I like the double sided tape better.

ChevyGal - I like that! Looks sweet!

Originally posted by 94YJGuy
ChevyGal - I like that! Looks sweet!

Ditto. That one is Badass and real functional. Those guages could not have been cheap.

Is the red space shuttle knob a winch control? WTF do you get one of them?

Capitol Jeepers Supply used to sell blank dash panels. I don't know if they still do. My brother did one in his CJ6 about three years ago.

Capitol Jeepers Supply (http://www.jeepparts.com)

Originally posted by GEARSINMYHEAD
Is the red space shuttle knob a winch control? WTF do you get one of them?

Looks like a battery disconnect or dual battery switch to me

Originally posted by GEARSINMYHEAD


Ditto. That one is Badass and real functional. Those guages could not have been cheap.

Is the red space shuttle knob a winch control? WTF do you get one of them?

Dunno, I can ask him though. He actually just put the truck up for sale. The guages are all Autometer to the best of my knowledge, and yeah a few hundred (I wanna say about $400) bucks at least....

Originally posted by ChevyCaGal
A guy in my club recently did this.....
http://coloradok5.com/photos/data/500/5303right_side_dash.jpg
http://coloradok5.com/photos/data/500/5303left_side_dash.jpg
You might like something like that. It was a custom job by Grady's in Sacramento... I know too far for you, but it looks like an awesome idea to copy for your application... :)

that's where I'm taking my rig after Greg finishes my cage this week!:D

those gauges are not that tuff to come buy for under 200, I got my speedo fuel oil water and volts for 80 bucks and my tack cost me 57.00, go on ebay and look around those paticular gauges are auto meter utlra lights, summit usally has the best prices....................ltr

mine is nothing exciting but on the topic of custom dashes..

both alluminum

http://www.rcrc4x4.com/TechReports/BornAgain/Interior/dash.jpg

I need a recent pic of this one, since it is done now..

http://www.rcrc4x4.com/TechReports/MoPower/interior/dash/dash4.jpg

BTW only tool used was a drill and a jigsaw, no holesaws either

I wanted one with a little shape so I built this one a couple of years ago for my CJ5...

http://www.hybridaxle.com/images/uploads/04B9A94E-BB1E-4471-96F6-0FF3F291743700.jpg

EH... so its not a J5 but heres mine I built myself out of all aluminum. I can do it all click the link below.this one or the other (http://groups.msn.com/GrimjeepersPage/diamondplateaccessories.msnw)

Originally posted by TexasBlakeWFO
road signs make excellent dashes..
what a GREAT idea, I have a couple layin around. hahaha
phil

Originally posted by 99ChiliPeprTJ

what a GREAT idea, I have a couple layin around. hahaha
phil

Check around the city yards...The city will usually give them to city emps since they cant just throw the old ones away. I got a home depot cart holder sign about 5 years ago, it was laying on the ground in a parking spot and I thought man thatll make badass dash one day. Its almost 5 foot long by 3 feet tall.

Paul