|
: What are your opinions of conversion joints? KYJ10 03-04-2003, 09:48 PM I hung my 14FF today, now for the drive shaft. A 1310 to 1350 conversion joint is $30. The whole 1350 joint runs about $15. Cheaper and easier to find the 1350 u joint, but gonna cost me more to change shaft ends and balance. My question is, with a moderatley built 360, will a conversion joint hold up? This is with a t18-208 combo? Thanks, Dennis 66CJdean 03-04-2003, 10:23 PM Go for it. Just buy 2 is all. tubehead 03-05-2003, 11:19 AM You shouldn't have a problem. I've ran them before. blackyj95 03-05-2003, 11:23 AM i got 1 in the rear its cool Just buy 2 bigdude 03-05-2003, 11:31 AM I've run them and they did fine. sw99 03-05-2003, 11:34 AM I have the same 1310 to 1350 on my rear 60, no problems.. Seems to hold up better than the old 1310's I had in there with the stock axles. KYJ10 03-05-2003, 01:56 PM Thanks, thats what I went with today. All thats left is to attach the brake lines and I'll be sporting a 14FF under my J10! | |