: AAARRRGGG......Pirate Style Dana 60 Drive Gears
OK folks, here are the new Dana 60 35 spline drive gears. They just got finished up tonight. I will have the price on the set (including hardware) sometime tomorrow.
KEY FEATURES-
*4140 heat treated throughtout (not just throught the center of the splines).
*Drilled to reduce weight.
*Black oxided gears to eliminate/reduce corrosion.
*Low profile hard anodized top cap with groovy lazer etched "skull & cross bones" logo.
morpheus 03-11-2003, 07:36 AM those are sweet PIG !
- jack
Tiberian 03-11-2003, 10:08 AM Pig,
Did you ever figure a price on the flanges?
Steven
Originally posted by morpheus
those are sweet PIG !
- jack
Thanks Jack!
Originally posted by Tiberian
Pig,
Did you ever figure a price on the flanges?
Steven
Still working on it right now. I will post the price later today.
rodzzilla 03-11-2003, 07:51 PM Look good. How about some w/your avatar pic engraved. :D
TJ Fan 03-11-2003, 09:55 PM Those are sweet:D They look almost too nice to use!
fj40charles 03-12-2003, 09:05 AM Pig,
How much weight do you really save with the holes drilled? Wouldn't it be stronger and cheaper without the holes?
Charles
hey slacker how much for the bling ?
Originally posted by camo
hey slacker how much for the bling ?
$259.99 for the kit which includes all the hardware, new seals, and snap rings.
Dealer inquiries welcome.
Originally posted by rodzzilla
Look good. How about some w/your avatar pic engraved. :D
It will cost ya if they are just one offs.
Originally posted by fj40charles
Pig,
How much weight do you really save with the holes drilled? Wouldn't it be stronger and cheaper without the holes?
Charles
As far as how much weight is being saved; I don't know off the top of my head but will get back to you on that one.
As far as making them stronger.............. If you manage to break these (which you won't) you can smack my ass and call me Sally. How's that for a warranty? Serriously though, life time warranty (on the gear).
Originally posted by TJ Fan
Those are sweet:D They look almost too nice to use!
Why thank you Larry.:D You will hurt my feelings if you get a set and don't beat the shit out of them.
Rudezuk 03-12-2003, 03:13 PM I have seen these in person..................and all i can say is WOW, top notch stuff as always dave!:D
Originally posted by RudeZuk
I have seen these in person..................and all i can say is WOW, top notch stuff as always dave!:D
Thanks for the complement Shane. They came out pretty good.
Tiberian 03-13-2003, 02:59 PM Pig,
Are these internal or external flanges?
Steven
Originally posted by Tiberian
Pig,
Are these internal or external flanges?
Steven
Internal.
Tiberian 03-13-2003, 07:46 PM Any chances of you ever making external flanges?
Originally posted by Tiberian
Any chances of you ever making external flanges?
Probably not.
broncorob 03-14-2003, 10:47 AM Very sweet Dave, can't wait to get em!
Rob
Jeepmangled87 03-14-2003, 09:11 PM now I know what im saving for.
Originally posted by Jeepmangled87
now I know what im saving for.
I am sitting here by the phone when you are ready.
Here is another pic:
What about some external (Dodge style) 30 spline flanges?
Originally posted by DRM
What about some external (Dodge style) 30 spline flanges?
Well I have recieved quite a few calls for this application. As of yet we aren't planning on it but who knows.
Come AWN.............. Aaarrrgggg
rodzzilla 03-26-2003, 04:22 PM Ordered mine already.:D
ROKN ZJ 03-28-2003, 05:23 PM I got my goodies today! Unfortunatly I can't put them on until I get my new CTM shafts :(
They look nice sitting in the box though :D
rodzzilla 03-28-2003, 07:53 PM Mine arrived today, too. Thanks, PIG.
MIKE S 03-29-2003, 12:14 AM I think a set would look good on my new junk I will be calling you:D
jeeper111 03-29-2003, 08:28 PM Are they avilable for 44s too because if they are I will yake a set!
Originally posted by MIKE S
I think a set would look good on my new junk I will be calling you:D
They are on the way.
Originally posted by jeeper111
Are they avilable for 44s too because if they are I will yake a set!
Stay tuned................................. They may be in the works here shortly.
morpheus 04-01-2003, 08:51 AM Originally posted by PIG
Stay tuned................................. They may be in the works here shortly.
what's the est price for the 44 units PIG ?
- jack
Originally posted by morpheus
what's the est price for the 44 units PIG ?
- jack
Well, if we do them they should be a little cheaper but pretty close to the same price as the 60's.
morpheus 06-03-2003, 11:43 AM you ever get Aarrggg for 44's ?
Originally posted by morpheus
you ever get Aarrggg for 44's ?
The 44's are still in the works. Anyone know someone with a 44 Warn gear/cap they would be willing to let me borrow???? I'd like to make these so that the caps are interchangeable. :fj:
BillaVista 06-04-2003, 07:22 PM I got one, I can send it, you can keep it.
e-mail me Dave
Bill
RealJeepMan 06-05-2003, 09:30 AM Just wanted to give you and update Dave, I have 1 comp and 2 runs and they are doing great. I just pulled the front end apart the other day to check the axles and such, everything is good. And I am not running the axle snap rings.
Ryan
Originally posted by RealJeepMan(Ryan)
Just wanted to give you and update Dave, I have 1 comp and 2 runs and they are doing great. I just pulled the front end apart the other day to check the axles and such, everything is good. And I am not running the axle snap rings.
Ryan
Ryan, thanks for the update.;)
Those caps are high quality! How are you doing pig?
Originally posted by GFI
Those caps are high quality! How are you doing pig?
Do'in just dandy CalPolyPud. Is the Cruzah done yet???
GFI = CalPolyStud? hmmmmm very interesting.......:flipoff2: :beer: :flipoff2: ,
Nice caps Dave.... I think Ill be gettin some of them bad boys.... Can you make some with this guy
:flipoff2:
?
Ryan
Originally posted by YeeP
GFI = CalPolyStud? hmmmmm very interesting.......:flipoff2: :beer: :flipoff2: ,
Nice caps Dave.... I think Ill be gettin some of them bad boys.... Can you make some with this guy :flipoff2:
Ryan
Well, I am about to do another run of the gears. Which would you guys rather see on the caps...... :flipoff2: or :skull: ???
BustedRig 06-29-2003, 03:17 PM :flipoff2: :flipoff2: :flipoff2:
BillaVista 06-29-2003, 06:51 PM Well, my personal choice would be :rasta:
But good ol' :flipoff2: is cool too!
Hayraker 06-29-2003, 08:20 PM I think you should make them with the pig from your avatar.
rodzzilla 06-29-2003, 08:54 PM Originally posted by Hayraker
I think you should make them with the pig from your avatar.
I suggested that, too.:D
I think :flipoff2: would be good. Can we buy the caps separate if we have the original design?:D
ROKN ZJ 07-01-2003, 02:06 PM Originally posted by Hayraker
I think you should make them with the pig from your avatar.
I'm pretty sure the pig from his avatar is copywrited by pigwheels.
http://www.pigwheels.com/
I personally like the :skull: , but since I aleady have a set i guess it doesn't really matter what I'd like on the second batch...
Originally posted by ROKN ZJ
I'm pretty sure the pig from his avatar is copywrited by pigwheels.
http://www.pigwheels.com/
I personally like the :skull: , but since I aleady have a set i guess it doesn't really matter what I'd like on the second batch...
Yes, I jacked the pig logo from pigwheels. How about a :bender: on the next run of caps?
How about a big penis and some nuts?
Originally posted by GFI
How about a big penis and some nuts?
I don't think so numb nutz.
How about Donk's Mom, She's Hot!
SLO_Crawlers 07-15-2003, 01:50 AM You must hang out with TRD way to much you Donk lover. After this weekend even I started to be obsessed with the Donk.
Originally posted by SLO_Crawlers
You must hang out with TRD way to much you Donk lover. After this weekend even I started to be obsessed with the Donk.
just read my sig and you will know why :flipoff2:
Just Donk It! God Dammit Donk! Jesus H. Donk Christ! It's Hotter than Donk's Mom in her Bikini.
ultimatebronco 07-24-2003, 06:19 PM Mr. Pig do you have new info on the 44 flanges? Be ready to get some shortly if they almost done or you have them already.
Originally posted by ultimatebronco
Mr. Pig do you have new info on the 44 flanges? Be ready to get some shortly if they almost done or you have them already.
No new info. yet........ They will be done though. It will probably be another week or so before we can get the prints are done.
Custom engraving is now available for an additional 50 bucks.
What you need: an image in eps format .
EXAMPLE:
Mieser 11-13-2003, 12:18 PM sweet....
morpheus 11-13-2003, 02:45 PM that is SWEET !
ccrane 11-13-2003, 06:53 PM Sold,were looking for somthing just like this. Can you pm us with details? Chris.
SLO_Crawlers 11-13-2003, 09:11 PM Very nice Pig.
RedBullJeep 11-14-2003, 12:15 AM Beyond nice...Those caps were the unexpected finishing touch on the RockIt...I think I got just as many comments on those as the DUB's...handed out a stack of about 30 of Pigs cards just cause people thought they were bitchin'. Pig, those baby's ROCK!
ROKN ZJ 11-14-2003, 09:45 AM What colors can be used on the caps? And is there a template we need to use for the picture?
Originally posted by ccrane
Sold,were looking for somthing just like this. Can you pm us with details? Chris.
Please call for more info.
Dave 805-234-1760
Originally posted by SLO_Crawlers
Very nice Pig.
Thank you.
Originally posted by RedBullJeep
Beyond nice...Those caps were the unexpected finishing touch on the RockIt...I think I got just as many comments on those as the DUB's...handed out a stack of about 30 of Pigs cards just cause people thought they were bitchin'. Pig, those baby's ROCK!
Cool........... Glad to see you're happy with them.
Originally posted by ROKN ZJ
What colors can be used on the caps? And is there a template we need to use for the picture?
Well, pretty much any color can be used. If you want to use any color other than black its gonna be an additional 50 bucks.
If you send me an image make sure its in EPS format.
socalchef 11-15-2003, 07:34 PM specify vector eps...in printing (my line of work) a lot of numbnuts will just place a web gif in an eps file and think they're set for a 10'x20' banner.
Originally posted by socalchef
specify vector eps...in printing (my line of work) a lot of numbnuts will just place a web gif in an eps file and think they're set for a 10'x20' banner.
Thanks for clarifying.
TrevorXJ 07-09-2004, 11:26 AM Just order my set yesterday evening, cant wait to get them in
Thanks again
Just order my set yesterday evening, cant wait to get them in
Thanks again
They shipped yesterday and you will see them on the 14th :D
did I mention they are only $230 now!?!?!?!
TrevorXJ 07-14-2004, 07:43 PM Just wanted to say thanks. The drive flanges arrived today just as promised. This are some bad mothers. Cant wait to install them. Thanks again for the great product, service, and price.
http://members.cox.net/trevorxj/Picture_017.jpg
jekbrown 07-31-2004, 05:21 PM could i get a quote on a set of these, non-drilled and non-laser-etched shipped to 98686? I'd appreciate it, thanks!
j
Could you price me a set Dana 60 35 spline to 45342?
How thick is the cover?
Thanks, Teach
Drive gear kits are back in stock 230.00 each
Pics
http://www.pirate4x4.com/forum/attachment.php?attachmentid=161071&stc=1
Junk Driver 12-07-2004, 08:44 PM Got anything like that for a Ford D44?
unfortunatly we do not have any drive flanges for a D44
troyman 12-31-2004, 04:32 PM Drive gear kits are back in stock 230.00 each
Pics
http://www.pirate4x4.com/forum/attachment.php?attachmentid=161071&stc=1
Could you get her to hold those a few inches higher, can't see the bottoms :grinpimp:
Could you get her to hold those a few inches higher, can't see the bottoms :grinpimp:
lol
RockJeep92504 04-01-2005, 05:11 PM ANy news yet. Just blew a nother set of hubs. Just the caps. Got tons of drive flanges.
Kory
Junk Driver 04-01-2005, 06:32 PM I am tellin you... NOT everyone runs 60s!!! :flipoff2:
D44 drive gears are on our list of shit to do.
blacksheep10 05-22-2005, 02:52 PM Drive gear kits are back in stock 230.00 each
Pics
http://www.pirate4x4.com/forum/attachment.php?attachmentid=161071&stc=1
Ha, I had to look at this thread to see if you put that pic I took on here. very nice :laughing:
btw, love my flanges
Ha, I had to look at this thread to see if you put that pic I took on here. very nice :laughing:
btw, love my flanges
Yes, yes,
it is a very nice pic :D
toyzilla 06-01-2005, 04:45 PM How much for just the top cap?
They will not fit other model drive gears
but they are $35 ea
toyzilla 06-03-2005, 01:23 AM Damn! Thanks anyways. Do you know where I could get some? I do not know whos gears they are. I bought the axle with the caps missing.
It depends on whose gears they are
As featured on Xtreme 4x4
saprobe 01-07-2006, 07:54 AM http://www.pirate4x4.com/forum/attachment.php?attachmentid=56811&stc=1&d=1048897409
in this pic,are those a 35 spline external(dodge 60) ype flange?
if so,are you makin those now,too? if not who is ? :confused:
http://www.pirate4x4.com/forum/attachment.php?attachmentid=56811&stc=1&d=1048897409
in this pic,are those a 35 spline external(dodge 60) ype flange?
if so,are you makin those now,too? if not who is ? :confused:
No d60 external locks are avialble at this time.
|