|
FordCountryGuy 03-11-2003, 08:06 AM i need to fab a roll cage and also a body lift any suggestions the roll cage needs to fit under the top as i use it in the winter any suggestions ? das_jeepinator 03-11-2003, 09:08 AM are you planning on building the cage yourself or paying someone to do it for you? IMO body lifts suck get the sawzall out stock ride height and cut the fenders with the saw you can stick 35's on it with ease I've done it to, two FS bronco's one of which is a 86 put the tires on even before I got happy with the saw the rubbed a lil bit then none at all. animator 03-11-2003, 10:21 AM You might try searching in this forum. I know there's someone on here that did a roll cage for his bronco. Don't know if that thread has been deleted yet or not.... FordCountryGuy 03-11-2003, 03:27 PM i'd like to do the cage but am new at weldin and cuttin and i can't stake my life on inexpierience welndmn 03-11-2003, 04:33 PM Originally posted by FordCountryGuy i'd like to do the cage but am new at weldin and cuttin and i can't stake my life on inexpierience Then WTF are you asking? animator 03-11-2003, 11:00 PM 1 minute of searching = this (http://www.pirate4x4.com/forum/showthread.php?s=&threadid=85099&highlight=bronco+roll+cage) might be somewhat helpful FordCountryGuy 03-12-2003, 10:33 AM i could do some of the work but i need a plan drawing with measurements being as i have no idea what to measure so i guess i am askin if anybody else has an 86 bronco with a full cage or even if the know of anybody that makes one like smittybilt | |