i spoke with dyna bout a month ago... the guy told me that they had a tera 60 housing tested.... he said all kinda shit, but in the end it sounded like the housing was too weak and broke under load tests.... anyone hear this?

I haven't heard this, but I'd trust terra's design, being a single cast with no mods to it, over dynatracks where they take a ford rc 60 and cut the bottom off then weld a plate on there, and you can argue that terra is trimming down their ring gear on the outer edge, but they are having this done before the hardening process, so that really isn't an issue either,

I think what it all boils down to is that they are dissin the competetor, just like terra would and does do with their competetors.

I thought Dynatrac made their own, new casting as well. HP, cast in perches both sides, thicker.....


this is the first *I've* heard about them using Ford stuff, but then, I don't keep up with the stuff as much as others.

BAJG,,,

did you get prices for just the center section???

I only need one RR60 the front can be standard and we can do that. :trooper:

I wouldn't trust what they say. There are who many in comps now and none of them have broke. I have a Dynatrack housing I used in the front of my Jeep and it is there own casting not a Ford and it is very heavy duty but I doubt that the Tera is crap.

Consider the source. Dynarape is simply bad mouthing there competitor. Remember they think they invented dana60's.:flipoff: And as for their centersections...I have an inside source thay works for spicer and he says otherwise about them "casting" their own centersections"....Let me tell a little story..A guy aI know bought some 35 spline outers and 35 spline internal drive flanges from Dynarape...3 sets at 150 bucks a stub axle and 200 a set for drive flanges(ok the guy shouldn't have paid that much ,but anyway)...The guys at dynatrac swore up and down it was their own stubs axles and drive flanges.They all arrived in spicer boxes with spicer part numbers....Hope this helps you in taking dynarape's comments with a grain of salt..:D

Originally posted by onetonwillysands10
Consider the source. Dynarape is simply bad mouthing there competitor. Remember they think they invented dana60's.:flipoff: And as for their centersections...I have an inside source thay works for spicer and he says otherwise about them "casting" their own centersections"....Let me tell a little story..A guy aI know bought some 35 spline outers and 35 spline internal drive flanges from Dynarape...3 sets at 150 bucks a stub axle and 200 a set for drive flanges(ok the guy shouldn't have paid that much ,but anyway)...The guys at dynatrac swore up and down it was their own stubs axles and drive flanges.They all arrived in spicer boxes with spicer part numbers....Hope this helps you in taking dynarape's comments with a grain of salt..:D

So Dynatrac owns Spicer?

:flipoff2: :D :D :D :flipoff2:

any body with a dynatrac center can and will tell you for sure that it IS a custon casting. There's no doubt. flame away, but you get what you pay for.

So, can we get those spicer part numbers? I want to convert my front 60 to 35 spline outers without bending over to dynatrac :D

Thanks,
Phil

Originally posted by pjensen
So, can we get those spicer part numbers? I want to convert my front 60 to 35 spline outers without bending over to dynatrac :D

Thanks,
Phil

They are a D70 part. Try a search.

Thanks for the info, I will go search.

Phil

Originally posted by Aggro
any body with a dynatrac center can and will tell you for sure that it IS a custon casting. There's no doubt. flame away, but you get what you pay for.

I had a customer buy a front 60 for $4,000.00:eek: and it was not a "custom" housing. He thought he had something special until I showed him my 60 front looked like his.....ROFLMAO....:D :beer:

Originally posted by pjensen
Thanks for the info, I will go search.

Phil

35 spline outters ....Spicer PN3-82-871.....call Sean "Gearman" at RCD tell him you are from POR....... 916-852-7109:beer: :D

[QUOTE]Originally posted by Shaker


35 spline outters ....Spicer PN3-82-871.....call Sean "Gearman" at RCD tell him you are from POR....... 916-852-7109:beer: :D [/QUOTE

Those are secret part numbers.You shouldnt tell everyone about that little secret.:flipoff2: :D