|
STUB25 03-20-2003, 04:46 PM We're currently centering the front D44 and drilled out the factory welds on the axle tubs and are needing custom length axles due to the centering of the diff. Anyone have any idea's as to where/who can help me out here? Any help is good help!! afecko 03-20-2003, 05:08 PM Dutchman splines Warn alloy blanks for $250 a piece. 503-257-6604 Andy 2stroke 03-20-2003, 05:26 PM $250 for the inners only:eek: jeepmauler 03-20-2003, 05:53 PM Tom LeBlanc can do'em fer half that.Call and ask him 425-770-2233.Hell cut and spline and I'll shipp'em to you from my store.you pay shipping probably around 35 bucks STUB25 03-20-2003, 05:55 PM and they have the blanks? Thanks for the # STUB25 03-20-2003, 05:57 PM How much you thinkin from Tom? And is he using warn blanks or my stock axles? Dirty Harry 03-20-2003, 06:18 PM I just did the same thing and used a stocker on one side and sent the other side to Dutchman. It was $75 to cut and respline my inner axle shaft. The writeup is here (http://www.4x4wire.com/toyota/tech/dana44/axle/). jeepmauler 03-20-2003, 06:30 PM He can do both or should say Can get both.He lives down the street from Randi's R/P so just cruises up and gets blanks and splines 'em.He has no interest in shipping,but I am happy to do it for him so I'm workin on getting him to do out the area stuff.Tom does a great job and is a total perfectionist with his machinework. | |