|
toyotarules 03-20-2003, 05:39 PM I've got an 85 toy truck with a 22re and 5spd. The tranny pops out of reverse. Does anyone know of a fix for this? What trannies can I bolt in my truck? Can I use a 4spd tranny out of a 2wd 87 pickup with a 22R? What modifications will be needed if I do use this? Thanks. SeaBass44 03-23-2003, 10:19 AM No you can't use a 2wd trans. Replace the plastic seat and balll at the end of the shifter inside the tranny, should help, not 100% sure though. Welby 03-24-2003, 10:07 AM Do you have a body lift on the truck?? It could be something as simple as needing to trim the floor's sheetmetal to allow it to engage fully.. toyotarules 03-24-2003, 01:36 PM Hey seabass, I have already replaced the shift lever seat, didn't do a lick. Thanks though. I don't have a body lift welby. Mo 03-24-2003, 02:10 PM Originally posted by Welby Do you have a body lift on the truck?? It could be something as simple as needing to trim the floor's sheetmetal to allow it to engage fully.. cross-member drop? same effect | |