Dana 50 hubs the same as 60's?

I found an F350 (87 I think) with IFS in the front and what appears to be a Dana 50. The hubs are 8 lug and are larger than the D44. I thought I read somewhere that the hubs were the same on all D50's as D60's. Is this correct?

-Jack

Originally posted by IronBenderII
Dana 50 hubs the same as 60's?

I found an F350 (87 I think) with IFS in the front and what appears to be a Dana 50. The hubs are 8 lug and are larger than the D44. I thought I read somewhere that the hubs were the same on all D50's as D60's. Is this correct?

-Jack

They should be. I'd double-check bearing part numbers against your application just to be sure, but I'm betting they'd swap fine.

The F350 got a straight D60 in 86, FWIW.

oops, my bad. It's a 250.

-Jack

For people that search this thread. I checked http://www.timkeninfo.com and it looks like the bearing part number is the same for them. Thanks!

Yea, they are the same, i have used hundreds of them on dana 60 fronts. steve differential eng. inc.