i'm wanting to mate to D20 xfer cases together, and wondering if anyone has done this, and how, thanx

Wild Horses Bronco does it for Broncos. So I am sure it could be done with a Jeep 20.

I don't know if he's a member of POR or not, but this guy Chris (http://www.bc4x4.com/chrisw/) mated an NP203 and a Bronco Dana20 in his YJ.

Check it out

Originally posted by 76Levi5:
<STRONG>I don't know if he's a member of POR or not, but this guy Chris (http://www.bc4x4.com/chrisw/) mated an NP203 and a Bronco Dana20 in his YJ.

Check it out</STRONG>


Its called the Super Creeper. The 203 replaces the adapter between the 435 and the 20. It adds 7/8 inches to the tranny/tcase, so you dont lose much of your rear dline. Its a kit that wildhorses sells

209-943-0991 (wildhorses # if you have any quesitons about it)

Actually, it isn't. <IMG SRC="smilies/tongue.gif" border="0">
I built that setup myself, from scratch. The adaptors started life as scrap chunks of aluminum and steel, and Moser modded the shafts for me based on drawings I sent them.

Wild Horses does make a kit that does the same thing, but I've got better things to do with the kind of coin they want for it. Besides, mine's set up exactly the way I want. No compromises.

Chris