I am thinking of continuing to run my th350 dana20 t-case when I build a new motor for my next Jeep. I just plan on running a 355 with 9.5 to1s and a mild cam 270 to 280 lift. I like the sound of a lumpy cam and even though the power range is higher than I will be running it most of the time the bottom end torque doesnt decrease. Anyway I have asked some old school jeepers and they are saying it is a pretty strong unit. One guy runs a tpi motor in front of one with 35 16 15 boggers and has done 5000rpm clutch drops with no problem. I was thinking of getting a tera low kit for it and just run it.If it breaks just get another one for 50 bucks.