Quiz for you

[jdjanda]

What's the gear set go to? As far as I can tell that ain't no dana R&P

[Old Scout]

Put a tape to it man .We need some specs. Are there any # on it? Who made it?

[jdjanda]

Brand new IH ring and pinion bought from International dealer auction. Has some light surface rust. Pinion has 10 large
splines and #'s : 8836 MT , also has 2.385 engraved on end of pinion. Ring gear measures 8.25" and takes RH bolts. Ring
gear #'s :L2 7836 37-9 Micro Test gear company.

Here's the specs from E-bay, I should have looked closer at the pic, before I bid, but the price was right and someone will need it. If you look closely the splines on the end of the pinion then the threads.

[tsm1mt]

Originally posted by jdjanda


Here's the specs from E-bay, I should have looked closer at the pic, before I bid, but the price was right and someone will need it. If you look closely the splines on the end of the pinion then the threads.

10-spline? I have 10-spline 4.88 Dana 44 gears in the front of my black '77.

8.25" wouldn't be a '44 - is that D30 spec?

[jdjanda]

Originally posted by tsm1mt


10-spline? I have 10-spline 4.88 Dana 44 gears in the front of my black '77.

8.25" wouldn't be a '44 - is that D30 spec?

Ah but, the splines are at the end of the shaft, then the threaded section. So I have no idea here.

Joe

[Scout Dude]

I sent the specs to my buddy who works for a R & P place. I'll see if he can come up with something.

[Scout Dude]

My Buddy says this:

THE RING GEAR # DOESN'T COME UP, BUT EVERYTHING ELSE WOULD LEAD ME TO THINK THAT IT IS AN EARLY (PRE 1969) DANA 44. 4.11 RATIO

[jdjanda]

Originally posted by Scout Dude
My Buddy says this:

THE RING GEAR # DOESN'T COME UP, BUT EVERYTHING ELSE WOULD LEAD ME TO THINK THAT IT IS AN EARLY (PRE 1969) DANA 44. 4.11 RATIO

Very interesting, I might have to post this at the BB, since you guys failed me :D I sure someone will want it for a resto project. At least know I can go to 4.56's in the front 44.

Joe

[Old Scout]

Dana Never made a D44 4.11:1 gear set.
.
.
.
.
.
.
.
.
.
.

.
.
They did make a 4.09:1 set thou :flipoff2: :flipoff2:

[jdjanda]

Originally posted by Old Scout
Dana Never made a D44 4.11:1 gear set.

.
.
They did make a 4.09:1 set thou :flipoff2: :flipoff2:

Oh so does this mean you want it? Might be a little too much gearing for your 27's on the freeway.





:flipoff2:
Joe
:flipoff2:

PAD!!

[Old Scout]

:flipoff2: :flipoff2: The Scout is on 35s and the daily driver is on 32s so :flipoff2: back at you!

[jdjanda]

Originally posted by Old Scout
:flipoff2: :flipoff2: The Scout is on 35s and the daily driver is on 32s so :flipoff2: back at you!

Are you and Josh C in the same :rainbow: Landie club?



:flipoff2: Joe :flipoff2:

[JoshC]

Originally posted by jdjanda


Are you and Josh C in the same :rainbow: Landie club?



:flipoff2: Joe :flipoff2:

It's Landi to you! :flipoff2: