|
The Yetti 04-20-2003, 02:49 PM I have a 2wd sm465 and a divorced np205. was wondering if these could be bolted together? both are 32 spline, dont want to use as a divorced case, but don't really want to swap out the whole thing if it's not neccesary. if there is a cheap 465/205 available or someone who ants to trade for divorced case thats also a possibility. thanks. Two Dogs F..king 04-20-2003, 03:24 PM www.advanceadapters.com The Yetti 04-21-2003, 05:59 PM Being as all that seems to be listed is the jeep t-cases, and i have a np 205 with 32? spline input, this doesn't help much. I had heard that 80 and newer 205s were 32 spline as well, but don't know. is it possible that the stock adapter for a 80 or newer truck would work. just don't know, has anyone done this before? thanks. b454rat 04-22-2003, 08:33 PM Why not run the 4-speed and divorced case?? You won't need any CV shafts. That 205 has 32 spline on all inputs/ouputs, so upgrading to 1350 joints is easy as going to a junkyard and getting them. They can be found on 3/4 tons with the 203 or 205. You got the stuff, might as well use it. | |