SOLD Heavy Duty steering for landcruiser: SOLD
Will only work on spring UNDER cruisers with a Toyota pickup disk brake conversion and Saginaw steering
Includes:
* reemed Toyota steering arms.
* Shortened and reemed Chevy Dana 44 tie rod (1" thick solid)
* Saginaw pitman arm off of a Wagoneer (1" drop and 7" long)
* Wagoneer draglink
Note: The only thing needed is the tie rod end off of a mid '70s Wagoneer draglink

Conferr Shackles for cruisers: 1.5" lift, $20
pic located at: http://www.central4wd.com/store/itemdetail.asp?ID=1332

SOLD SOLD SOLD Conferr auxiliary fuel inlet neck, mounting plate, and fuel cap $20
NOTE: This does not include a gas tank...just the complete inlet neck which you could use for any auxiliary tank.
pic located at:
http://shop.store.yahoo.com/coolfj40/gastanfj19th.html
It has about a foot of steel tube that is not visible in the picture in the above link. Note: It is the third pic from the bottom.

(4) Champion Beadlock OUTER rings only. $95
Red anodized color. Cost $52.95 each from champion. Pics located at: http://www.championwheel.com/Champion_Catalog.htm

Camper Tie downs: $50
Brophy Super Heavy Duty clamp on tie downs. NO drilling required. Designed for the biggest campers. I paid $87.03 at GI Joes in Federal Way. To give you some idea of how sturdy these four tie downs are, they weigh 46lbs together. http://www.crbrophy.com/tdhd.html

$10 8ft whip antenna w/ 10ft of coaxial cable

$5 White firestick

$20 Dana 30 axle shaft for older jeep fullsize (short side)

$15 Dana 44 lockouts (full time "slugs") Internal hub style

$5 (2) Dana 44 yokes (u-bolt style)

SOLD SOLD $5 Dana 60 yoke (1310 strap)

Buyer pays shipping from 98513 Olympia, WA

How long is the Firestick?

Are the 44 slugs for internal or external hubs? If they are external I want em.

I'm guessing the firestick is ~4ft. Whoever had it before me broke the threads off then drilled and tapped it. I got a maxrad lookalike (the short little whip) instead and never used this one (it is used though).

The D44 slugs are internal (i'll adjust the add so it says)

top

I am interested in the bead lock outters. How many bolt and are they new are used? Condition? Any pics?

The rings were used for a couple weeks. They have "wavies" in them from being tightened down. They have very little (if any) in the way of scratches or dings. The anodized red has faded quite a bit. I wouldn't hesitate to swap on on to my locks if I ruined one of my rings.
I posted a Q on general discussion about 1 1/2 years ago asking if the wavies were a problem and the general consensus was "no".

Top
Fuel filler neck is sold.

Oh yah, the beadlock rings are champions...I think they are 24 bolt.

$5 (2) Dana 44 yokes (u-bolt style)

If these are for 1310 I will take em both


email me or PM

Nothern, your pm box is full.

I know two messages and its full.........sheesh...its empty now...I guess you gotta delete em fast!

top

I will take the beadlocks if they are still availible.

Edfab,
Just to make sure you understand these are OUTER rings only, not the entire beadlock.
e-mail of pm me if further interested.

what width sprin are the shacles for?
shon

The shackles fit a cruiser spring. I'll do a search and post back today with the width.

I can e-mail you a pic if you want.

http://www.pirate4x4.com/forum/showthread.php?s=&threadid=95704&highlight=spring+width

This thread says cruiser springs are 3".

Steering is sold (rather traded for a big bottle o' JD :D )

beadlocks sold

Dana 60 yoke is sold