FFFRRREEEEBBBBIIIIEEEE. Leaf springs 2.5" wide San Jo. CA

[sfazr2]

Leaf springs...get your leaf springs. All different lengths. Not too saggy either. Will have a 52" main available soon. The rest are support leaves. Even have overload leafs.

Greg
408-685-6726

Edit: I've been getting guys asking me if I have any springs for a particular vehicle. These came from s-10's and cherokees. But if your springs are 2.5" wide, I don't see why they wouldnt work.

[Flatty]

You got any 3/4 ton springs? I want to 1/4 my rear, and need some 3/4 ton springs.

Dimtiri

[sfazr2]

Couldn't you just build a thicker leaf pack. I just have a pretty large assortment of leaves. I do have some with eyeletts that you could use as a main. I'm not real familiar with how the 1/4 is setup. I've seen it but not in detail. These leaves came from the back of s-10's and cherokee's.

As far as I know the 3/4 ton's just had more 2.5" springs than the 1/2 ton.

[INFAMOUSBUTCHER]

you still have these leafs? if so how many cherokee pairs do you have? im very interested

[sfazr2]

I used the cherokee mains to do my buggy springs thus just the rest of the pack... I'm sure otherwise you could build a whole set from what i have. I do have an s-10 main available (52") with you choice of lengths for the rest of the pack.

[D-RAT]

If you got a couple with some decent arch and are about 30" long with the hole in the middle of the span, I'll take a pair of leaves.

Work up shipping to 85206 zip code and PM me if you can help me out.

Thanks!

[sfazr2]

just how many leaves in a pair do you need? how far off center can the holes be. And shipping? sure it's worth it? Checked with a local junk yard?

[D-RAT]

Just looking for two single leaves. My laziness and lack of free time has kept me out of the yards. Would pay $25 shipped for 2 good leaves that are the size I'm looking for.

[Janoso]

how many leaves or pairs of leaves do you have? I could possibly take them off your hands.
Janos

[Brutpwr]

Need some leafs to play around with on my Toyota and my bike trailer which is on Wrangler 4" springs! Let me know if you have anything left and I'll swing on by!

Jason

[sfazr2]

I'm not sure how many leafs i have. I'll be happy to pull them out and let you guys have at them. Give me a call at 408-685-6726 to get my address.

[Skeezr]

what size of overload springs u have im interested by the way do u have any u bolt plates for a dana 30

[sfazr2]

I took all of my overload springs out. They're 2.5" wide and about 24" ish long. They're about 3/8" thick at the center.

I do have dana 30 plates but i'm trying to save them for the buyer of my axle so it's a complete bolt in.

[Skeezr]

Ill take 2 of your overload springs when do you want to do this

[sfazr2]

Today if possible. I'll be out of town for the weekend. I don't fly out untill 8pm so sometime before 6pm...i'm probably home all day
408-685-6726

[Flatty]

Do you have any Ford F250/350 springs?

Dimitri

[sfazr2]

no they're like 3" wide right? no all of mine are 2.5"

[Flatty]

Not all of them. Some of them are 2.5" wide

Dimitri

[sfazr2]

I edited in my first post that these are from s-10's and cherokees, but as far as i know a leaf spring is a leaf spring, just depends on the width and the how stiff you want it (lenght) To a point arch makes a difference but probably 90% of the leaf sprung vehicles out there have a pretty standard arch.

[LandCroozer]

Free springs? If you're in San Jose like you're tag says, PM me and I'll come by with a six pack for ya and pick up whatever you got left.

Please specify beer or soda.

-tom

[1TFROT]

Greg, this is Steve,

do you still have a main from an S10 or (specifically a Z)?

I need a main. can you ship?

I know UPS has an "as is" shipping style.

please let me know.

[sfazr2]

I do have the leaf packs but i've already claimed them to someone else. If they bail then I'll give them to you. I'm about 99.9% sure though that all the s-10 leaves are the same, just the mounts on the frame are different.

[1TFROT]

sweet, thanks.

I'll take them if the person ahead of me bails.

I'll take the whole pack if need be, but I just need the main leaf for one side.

thanks again

[sfazr2]

If one of you local knucle heads don't come and get this stuff like you say you are, I'm going to dump it over at SIMS metal. I've put my phone number up and no one has called me. For guys that are long distance, I think I already know what to save and you're waiting on me.

[1TFROT]

any word yet, Greg?

just curious.

[sfazr2]

Well i swapped my rear springs as planned on saturday. I need to email the guy that wanted the rear springs. then i will let you know.

Greg