Toyota High Steer Kits

[BnTMike]

These are the biggest and I think the best high steer kits for toyotas

1.5" DOM 250 wall 2 pieces for drag link and tie rod
1 ton chevy rod ends
2% less lead in the Arm steel certified
Horizontal Grain steel for the arms
includes all Jam nuts and small parts including pitman arm insert and tube inserts for you to weld in

We run the drag link into the tie rod to split the pressure between both arms at an even rates... this also alows the front end to drop out with no bind on the TRE

Regular price is 549.00
Sale Pirate price is 469.00

[PIA]

We run the drag link into the tie rod to split the pressure between both arms at an even rates... this also alows the front end to drop out with no bind on the TRE



so do you ream out the shock eye of the TRE?

[BnTMike]

yes

mike-

[Blucruz]

Hey Mike, do you have weld on spring perches for Toy's? if yes how much? :D

[BnTMike]

you bet...they are universal but 18 a pair for weld ons

Mike-

[mobil1syn]

Originally posted by BnTMike
We run the drag link into the tie rod to split the pressure between both arms at an even rates... this also alows the front end to drop out with no bind on the TRE


for some reason this isnt making sense to me, do you have a picture of an installed setup?

[BnTMike]

pic

[DRM]

Great price on a stout looking kit!

For those not familiar - mounting the drag link to the tie rod end like that offers great movement during flex, and lets that joint work in the best plane of movement possible for a TRE :)

[BnTMike]

ttt

[Tankota]

Can you give me a little more info on that TRE with the reamed hole in it?

Is that TRE stock that length?
Do you sell just that TRE?
Thanks.

[porterwagner]

hey you should keep the pirates deal for good. that way when i save up money i can get that. hellofadeallucile!!:bounce2: :bounce:

[BnTMike]

we chop off about 1 inch of threads on all the tre's when we install but its up to the customer....they have like 4 inches of threads and the tube adapters are 2.5 inches deep

Mike-