do the cj springs move the axle back any in the rear? how much? is the a certain ply i should get? what kind?(I-6 or V8 springs?)
will they give it more lift or are they the same as stock rear samis?
thanks guys.

They move the axle 2" back, Use front CJ7 leafs from a V8 ( 6 pack). Are you doing this in conjunction with 3/4 eliptic?

We have spring hangers which bolt onto your existing spring hangers which allow the use of a CJ spring - which keeps the axle in its proper location. It also requires the use of a longer shackle or Missing Link in the rear. The added lift using a CJ spring is approx. 2 inches. We prefer the 5 leaf pack with a thicker main leaf for axle wrap control.

Your other option is Front wrangler 4 or 5 pack relocate the hanger and use 5" shackle or drop link shakle track bar recomended ( alot of flex this way ) take a look here (http://www.geocities.com/rockrat87) :D :D

ok, i'm not into buying things....... so how do i make something to keep the axle in he same place? and no john, i'll be using missing links, a goffy leaf/buggy spring wouldn't be too easy on an 88 with the springs outside the frame unlike your 85........
one thing about the rear springs in the front, they're already installed and all done but left my stock shocks on cause i don't have any d-shaft spacers, so how thick is the spacer i need?

3/4 " SPACER IN FRONT SHOULD TAKE CARE OF IT AS FAR AS RELOCATING THE REAR SPRINGS LOOK HERE (http://www.geocities.com/rockrat87) at suzuki pics I have one of the ones I made if you want I can get you the dimensions and Email it to ya not thay hard to make :smokin: :D :smokin:

yeah, if you don't mind.........did you make it out of alumium? a pic would be great but if not a good explantion would do......thanks rockrat and guys...:^)

here you go the spacers on rear shaft 1/2" front 3/4" they are
aluminum if you looken at at the shackles 3/8 steel those pic's i just posted under shackles also the shims came with my lift kit
from North coast offroad but you can get them through him seperatley

front shaft

relocation bracket for wrangler springs on the rear side's 3/16"
main cross and bolting plate 1/4" and hacksaw and grinder

thanks, about how much did they cost to make? and how did you make your "sissor shackles" or missing links as we call it? got any close ups? with stock springs? or your rears in front.

Check out this site. They have spacers and missing links. All the prices are in canadian bucks.


www.breezeindustries.com

once again i don't like buying i like building........i'm on a high school budgit......thanks anyways

I pm ya let me know :smokin: :smokin: :smokin:

thanks alot rockrat.........i just e-mailed you for pics of your "sissors"
........again thanks..........:roxy:

hers how i did mine