<FONT COLOR="Yellow"><FONT size="2">looking for who makes them wher to get how much ect....</FONT s></FONT c>

<FONT COLOR="Yellow"><FONT size="2">pic#2</FONT s></FONT c>

www.fourxdoctor.com/main/body_guard/rockerbars.html

I dont know who makes em but I know you could whip a set of those up in an afternoon, they are simple to make!! Thats if you have the tools\knowhow of ccourse.
:D

I got mine from kilby, list is $260

looks like angle iron plus a little extra something..make your own. or get them made. obviously you can get it done for less than 260!!

I have them and they're great. I'd have made some like them if A: I had a welder, and B: I had any fabrication skills whatsoever :D


They're plenty stout though, and I have one less area I have to worry about on the Heep...

Here's the only pic I have of them on my work comp...

have someone bend up some 1/4 inch plate and weld some old nerf bars to them. Here is a shot of the ones I did. cost me $100.

BlueYJ :cool2:

Check out Pertersons Offroad. They have them in a nerf bar list in Dec.

Originally posted by BlueYJ
have someone bend up some 1/4 inch plate and weld some old nerf bars to them. Here is a shot of the ones I did. cost me $100.

BlueYJ :cool2:

don't have anybody bend 1/4" plate, BUY ANGLE IRON to begin with:rolleyes: and old nerf bars are crap to begin with, just have some tubing bent, you'll have a MUCH stronger end product. Just look at this smitty-built nerf:rolleyes: that's from ONE DAY at the Hammers.

Ya, make your own - simple, easy, cheap. And if you plan on using them, you won't worry about slammin them around a bit.