Wich way do the military wraps go front or back? my spring only have one military wrap on each spring I guess thats normal I dont really know,Any ways I just need to know if they poing forward, or back.if this is un-clear does the military wrap go in the shackle or spring hangar end? <IMG SRC="smilies/usa.gif" border="0">

Originally posted by Jeepmangled87:
<STRONG>if this is un-clear does the military wrap go in the shackle or spring hangar end? <IMG SRC="smilies/usa.gif" border="0"></STRONG>

Both

the ones i have seen with only one end wrapped it went to the hard mount end. easy to figure out though. the bushings are different sizes in the two ends. the bigger diameter bushing hole will go to the hard mount end and the smaller to the shackle.

If you are putting them on the rear, then put the wrap at the spring hanger end.

The part thats fully wrapped around the mainleaf goes on the fixed mount on your Jeep. The side that is half way wrapped goes on the shackle side.. Atleast thats the way it is on my Rubicon Express Extreme duty's are.

Thanks guys got it figured out!! <IMG SRC="smilies/usa.gif" border="0">