Ok, whos got this setup and how the hell did you get the shifter to work without it being right where the driveline needs to reside? :confused:

its called modifiy the shifter i just did this im runnin the same set up the short adapeter is actuyally for teh 203 i do belive.. any way would u like pics of what must be done?


payton

Originally posted by SittonHigh
Your driveshaft hits your shifter? My combo is the same, and it came out of a Bronco. I haven't instaled it yet, but it worked in the Bronco.

yup.. High pinion front , and the driveline is RIGHT smack dab in the middle of the shifter on the tranny.

Originally posted by payton its called modifiy the shifter i just did this im runnin the same set up the short adapeter is actuyally for teh 203 i do belive.. any way would u like pics of what must be done?

payton

yes please :D

What vehicle? I've run that with a stock EB 44 and a HP 60. I had to cut off the shift arm from the transmission, then got an aftermarket shifter and used a cable. Part of the install kit has different arms you can clamp on the shaft that allows the arm to point up instead of down.

Originally posted by FearMe
What vehicle? I've run that with a stock EB 44 and a HP 60. I had to cut off the shift arm from the transmission, then got an aftermarket shifter and used a cable. Part of the install kit has different arms you can clamp on the shaft that allows the arm to point up instead of down.

thats exactly what i need!! We alread have a b&m shifter, who has the clamp on reversable arms? What kit did you use?

This is in a 72 bronco. http://www.pirate4x4.com/forum/showthread.php?s=&threadid=141720&highlight=coils

to answer yer question... I have no fawking idea... I have the long adapter & mine clears fine... close, but clear.

so is it ready to go? PICS !!! :flipoff2: :flipoff2:

Originally posted by AZFord4x4
to answer yer question... I have no fawking idea... I have the long adapter & mine clears fine... close, but clear.

so is it ready to go? PICS !!! :flipoff2: :flipoff2:

:flipoff2: thanks for the help matt, you are a plethera of worthless information.

Its CLOSE to ready, will be running tomorrow. still no radiator, but that should be done this weekend along with drivelines. Needs a shifter. Seats are in, instrumentation will be in tonight, steering is done (toyota tilt coulmn was a bitch but came out NICE). Still waiting on a backordered long side warn shaft from your buddy. needs brakes. I think thats the list. I'll snap some updated pics this weekend. :D

Nate