I need a reamer/drill bit to drill my Jeep my Jeep pitman out to accept the large Chevy tie rod ends. I don't know what to look for. Does anyone have a part number or SOMETHING to lead me to what I need?

J. J.

Try Speedway motors at 402-323-3200. They sell the 1 1/2" per foot for 80 bucks. P/N is 91089411.

I used a Unibit. Make sure you get one of the good, coated ones (more expensive, but still only around 30 bucks). I used one of their bottom-of the line ones and made it work, but it took half a can of thread cutting oil and 15 minutes at the ol' drill press to get the job done...

HTH,

Jake Harsha
Hunt Technologies
Pequot Lakes, MN

Unibit...really! This is steering stuff! Unless you have the inverse unitap.....

Thats about the scariest thing I have ever heard! <IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/eek.gif" border="0"> A unibit to do the taper in steering components! <IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/skull.gif" border="0"> <IMG SRC="smilies/jeep1.gif" border="0">