1974 Jeep Wagoneer 360ci (needs rebuilding), TH400 tranny, Quadra-Trac transfer case, Dana 44 front axle flat tops (narrow trac), Dana 44 rear axle (narrow trac, offset to pass. side), Body is straight (has one bad spot on rear driver's side fender where tire hit it). It has a power moon roof and rear window.......$650

Will sell whole or part

1975 K5 Blazer body (straight, needs paint) (no grille), frame (straight, no cracks) and top .....$350

1976 Chevy LWB 4x4 305 w/650cfm Edelbroch (sp?) carb (out of 1986 Z-28) 30K on rebuild including cam, rings, lifters, etc., TH350 (needs torque converter), NP205, Dana 44 front axle, 12 bolt rear axle, (not sure of gear ratio, will check if get any serious interest), Dual gas tanks, stock height, 16" steel wheels with new mud tires on back and all terrain tires on front......$1,350 with motor, $900 w/o motor

will sell whole or part

360 ci AMC motor (out of 1976 Jeep Cherokee) needs rebuilding.....$150

Dana 44 (out of 1976 Jeep cherokee)offset rear (wide trac)......$150

TH400 tranny.......$200

1976 quadr-trac transfercase (excellent running condition)........ $50

(4) 16" Rims off of 1991 Chevy Z71, 6 lug aluminum for IFS (includes center caps) with American Prospector 265/75/r16 tires (approx. 1/2" of tread) (one rim has a little "rock rash" not bad) other three in excellent condition......$150

NP241C Transfer case (excellent running condition).....$250


Location: Clay, Alabama 35048
Approx. 20 miles north east of Birmingham.
just off of I-59N (second exit after the end
I-459N)

Contact:
Email:
caosblazer454@aol.com
expjointguru@aol.com

Phone:
home (205) 680-3668
cell (256) 759-3673

Prices are negotiable

Chris
Blazer454

ttt

TTT

I will part out if intersted.

Seller highly motivated (married)!!!! Prices are negotiable!!!!!!!!!!! :D :D :D :D :D :bounce2: :bounce: :bounce2:

Chris
Blazer454

I only want the axles out of the 74 Wagoneer, how much?

I would like to get $450 for the axles. They are the main ingredients of the whole vehicle.

Call me at (205) 680-3668 and we can discuss it.

Chris
Blazer454

ttt

offers, offers, make some offers.

By the way, the narrow-trac front axle has flat tops.

Chris

btt

TTT

Let's Make A Deal......


Chris

1974 Jeep Wagoneer 360ci (needs rebuilding), TH400 tranny, Quadra-Trac transfer case, Dana 44 front axle flat tops (narrow trac), Dana 44 rear axle (narrow trac, offset to pass. side), Body is straight (has one bad spot on rear driver's side fender where tire hit it). It has a power moon roof and rear window.......$650

Will sell whole or part

1975 K5 Blazer body (straight, needs paint) (no grille), frame (straight, no cracks) and top .....$350

1976 Chevy LWB 4x4 305 w/650cfm Edelbroch (sp?) carb (out of 1986 Z-28) 30K on rebuild including cam, rings, lifters, etc., TH350 (needs torque converter), NP205, Dana 44 front axle, 12 bolt rear axle, (not sure of gear ratio, will check if get any serious interest), Dual gas tanks, stock height, 16" steel wheels with new mud tires on back and all terrain tires on front......$1,350 with motor, $900 w/o motor

will sell whole or part

360 ci AMC motor (out of 1976 Jeep Cherokee) needs rebuilding.....$150

Dana 44 (out of 1976 Jeep cherokee)offset rear (wide trac)......$150

TH400 tranny.......$200

1976 quadr-trac transfercase (excellent running condition)........ $50

(4) 16" Rims off of 1991 Chevy Z71, 6 lug aluminum for IFS (includes center caps) with American Prospector 265/75/r16 tires (approx. 1/2" of tread) (one rim has a little "rock rash" not bad) other three in excellent condition......$150

NP241C Transfer case (excellent running condition).....$250


Location: Clay, Alabama 35048
Approx. 20 miles north east of Birmingham.
just off of I-59N (second exit after the end
I-459N)

Contact:
Email:
caosblazer454@aol.com
expjointguru@aol.com

Phone:
home (205) 680-3668
cell (256) 759-3673

Prices are negotiable

Chris
Blazer454


Im interested in the dana 44 front end. Would you be wiiling to sell just it and how much if you would?

Im interested in the dana 44 front end if you would be interested in selling just the front. If you would how much?

What is the spline input on the NP241C Transfer case? What was the transmission in front of it?

what did the 241 come off of...700r4? is it a pass drop?

I'm interested in the TH-400, I don't suppose you have an engine that would go along with it do you?