|
PITDOG 07-10-2003, 07:30 PM I was given a D60 rear from an early 60's T-All I beleive. I was looking for a source for the pre 78' Dana BOM book so I could I.D. and find out if this is worth the build. I'm also interested in the book for other referance as well. The BOM is # 603054 18, if anyone can help? Thanks guys, Dog Old Scout 07-10-2003, 07:48 PM What would the BOM info give you that you couldnt find out on your own with a few common tools and a half hour??? What would make not worth a build? PITDOG 07-10-2003, 10:42 PM It's inaccessible. The number was taken before the pile began. If it's a 30 spline and the carrier break is right for my application, I may be able to run it, if it's runable, until $ and time permits the 35 spline carrier, axle shaft upgrade, it might be worth the dig. I think I remember something about an 16 or 18 something splined D60 that was in pickups and T-alls which is undsireable, correct? Blah blah blah, your right OS, I'll just dig it out and tear into it. Thanks for the adjustment. Tony Sobrito 07-11-2003, 10:53 AM FWIW: in my gm specific bom list 602 is 1968 and older, 603 is 1968 and up. 03tjmike 07-11-2003, 12:25 PM I have all the books 603054-18 is DANA 60 3.54 R&P tooth combo is 46 - 13 Trac-Lok R&P p/n is 706660-1x case assembly p/n is 706662x axle shaft p/ns are 32987-1 need anything else let me know PITDOG 07-11-2003, 05:53 PM KILLER! Thanks guys. | |