My CJ-5 is for sale:

-1975 CJ-5, AMC 304, T-15 3 speed manual, Dana 20 T-case
Originally, this was a Renegade Levi's Edition(Blue)
-Narrow Track Dana 30 front, Dana 44 rear(30-spline, 1-piece axles), both are 3.73 gears with new Lock-Rites. Front is disc brakes(from 1981 CJ-5), rear is stock 11" x 2" drums
-Tires are brand new (they have 18 miles on them)
Front: 35x12.5-15 Swamper SSRs on 15x8 steel rims
Rear: 35x14.5-15 Swamper Boggers on brand new 15x10 steel rims
-Full roll cage, which is supported to the frame front and rear
-Weatherproof CB, mounted to the roll bar
-Spring Over with YJ springs. Very flexible.
-Plastic drag race seats with RJS 3" lap belts
-bikini top
-New hoses and belts. New alternator.
-Stainless brake lines, and new hard lines.
Vent lines run up over 4ft high, etc.
Body is pretty good, has trail dents, some rust, overall soild. Its a 1978 CJ-5 body.
Frame is very solid. I did a frame up build of this Jeep in 2002. The body mounts were modified to accept the 1978 body.
Many other new parts last year.


Now, the stuff that is wrong with it or needs finishing:
The motor needs new valve seals, a few are pretty leaky.
It has no distributor or headers right now, I was going to swap in a 4.3 chevy, so I sold the DUI and headers
It needs to have the lighting wiring finished.

Unless they sell first, I'll include headers(outside the frame) and mufflers(2 flowmasters), and a stock ignition module.

$2500


This is a LOT of Jeep for the money. The tires and axles alone cost $2000...

Please note, the winch in the picture has been sold.

if interested, please email me at haggar1850@comcast.net

Located in SE Michigan

Thanks,
Haggar

http://mywebpages.comcast.net/haggar1850/jason%20-%20ramp.jpg http://mywebpages.comcast.net/haggar1850/jeep1.jpg http://mywebpages.comcast.net/haggar1850/jeep4.jpg

bump