I've had my cherokee for 4 years now and the motor mounts are toast. I went and bought a set of M.O.R.E.'s mounts. I got the drivers side one on fine. The problem is the pasanger side. I removed the oil filter to remove the bolt and the support that the filter attaches to is still in the way. Is there a way to remove it. I've looked in my chiltons book and cannot find anything. Or is there another way that someone has been able to remove the main bolt.

Thanks:beer:

Brett

You have to remove the whole oil filter adapter assembly from the block. I have to do mine too at some point

this write up may be helpful http://www.off-road.com/jeep/cherokee/xjtech/engine/engmounts/