I have an energy suspension body mount kit and I am adding 2" blocks. I believe the bolts are 3/8 16 but I need to know how long to get them. Any help would be appreciated.

When you intall it loosen all bolts take out the bolts on one side and go down to the hardware store and get the same bolts but two inches longer. All the bolts are not the same size thread. If I remember right the grill mount and the rear mount bolts are one size larger. I would also think about 1" blocks and doing a little more trimming.

Someone before me took them out and threw them all out.

Originally posted by Elway70
Someone before me took them out and threw them all out.

Your probably looking in the 4-4.5" range.. I think there are 8- 3/8-16 and 3- 7/16" bolts.. you will need to get a few samples and make sure of the length, you need about 3/4" insertion..

Good Luck

Break out the tape measure! That's how I did mine and it took all of ten minutes.