|
: How do you Remove CV axles on a 2004 F150? RawkAholic 08-02-2003, 10:25 PM I'm putting on a Fabtech 6" lift on my 2004 F150 SuperCrew... I've gone so far snag free until now. I can't get the Bolts that attach the CV axles to the T-case broken loose. the axle keeps spinning... any tips??? I've tried everything i can think of... thanks DEnd 08-02-2003, 10:33 PM Impact gun on reverse. :flipoff2: or have someone stand on the brakes. RawkAholic 08-02-2003, 10:39 PM Impact isn't working... I'm having to use a breakerbar. and there are no rotors on... So no brakes to stand on.... already learned that the hard way... Popped the brake cyl. out... big mess. Hickeyjones 08-03-2003, 01:06 AM if the diff has a yoke, put a big crescent wrench on it. if it is a flange, thread two bolts in and use a pry bar on them. Next time, break the bolts loose you jack the trucks tires off the ground. SolidAxleDurango 08-03-2003, 04:50 AM Put it in 4wd and put it Park. SolidAxleDurango 08-03-2003, 04:55 AM Oh and BTW... The ONLY way to properly lift this IFS rig is with a cutting torch, lots of new metal, a welder, some nifty adjustable coil buckets, maybe some Wild Horses EB 5.5 coils, misc heims and Johnny Joints.... (the list goes on) :flipoff2: RawkAholic 08-03-2003, 10:48 PM I figured it out... I just used a big steel pipe in between the studs and anchored it to the garage floor... Ghetto.. but it worked.. Thanks for the input guys! | |