i'm trying to get the hub assembly off my dodge truck, its a '99 1/2 ton 4x4, the outter castle nut is on there pretty tight, i've broken a 1/2" breaker bar and rachet tryin to get it off, anyone know of any other ideas of how to get it off?

You'll probably need a 3/4" drive breaker bar.

IMPACT

:flipoff2: :flipoff2: :flipoff2:

i got the whole assembly off, w/ axle shafts and all, i don't have an impact cause i'm broke, if anyone has a spare air compressor lying around, send it, but i'll have to take it somewhere in the mornin to a shop and see if they will let me use one of thiers

Use heat. Heat the nut. At about 200dg. F It will be to hot to touch for even a second. At that point try taking it off. Only try to heat the nut.

Lance has a 3/4" set at Creative Audio in College Station, and James has one down in Anderson that you can use. Apply heat, that is your best bet, just the nut so it expands. Good luck:) :)