Well which is better for a ford 60?? what must be done to put high steering on a ball-jointed 60, I know that the king pin one you can just put caps on the king pins that have the arms attached to them??

Thanks
Craig
searching didn't seem to give me any answers.

You will have to mill a spot on the ball joint 60 to fit the arms and the arms will use 3 bolts not 4.

King pin is way better/stronger. Converting a ball joint knuckle to have high arms seems like a lot of trouble? You know when u see peoples knuckles break off and the tire look all jacked. More than likely its a ball-joint. Try and get Kingpin if you can.

any pictures of the differences.....not really sure what either look like (at the knuckles)

i have a king pin, he he, so that makes me cool right? jIMMy

Here is my 60 and it is a king pin 60http://www.respite.org/images/cj66dean/myjeepfront1.jpg

Heres my Ball joint 60 w\ hi-steer.

http://albums.photopoint.com/j/View?u=1200166&a=13579184&p=52449068

does anyone have a pic, just like jettechs, but for a kingpin 60?
and does anyone have an extreme closeup of the kinpin assembly?
~john

yes
www.gohumvee.com
has the entire dana 60 manual online
I have the same in WORD format