|
Benny 08-15-2003, 12:25 AM I need some plastic caps for 1" tubing. I bought some, but they are made for thin wall tube (1/16) and I use 1/8" wall tube. There is not enough material on the cap to shave it down. Any know of a source for such a thing? woody99 08-15-2003, 12:48 AM http://www.outwater.com indulf 08-15-2003, 04:53 AM http://www.mcmaster.com they have vinyl caps for most OD size tubing/pipe. Benny 08-17-2003, 08:30 AM First link doesnt work. And the second link doesnt have (or atleast I cant find) plugs for thicker wall tubing. Anyone else? :confused: Suprsizit 08-17-2003, 11:51 AM How bout PVC, CPVC or ABS, the have caps for all that stuff at Home Depot....09 ToyFord 08-17-2003, 01:36 PM Is this 1" OD tubing? If so shove a 7/8" drill bit in the tip of the tubing and make the caps you have fit that way? Otherwise get the metal caps that have the little fingers on them, you should be able to bend those around enough to make them fit. Or get some 3/4" round stock plastic (where, i don't know...hobbie shop?, plastics supplier), cut it to lenght and beat it in to the end of the tubing. Benny 01-27-2004, 10:58 PM its square tubing.. Now I need 1x1.5x/.083 caps Still cant find any. Old Scout 01-27-2004, 11:09 PM http://www.kingmetals.com/Pages/CatalogIndex2.html Jason R 01-27-2004, 11:43 PM anyone make metal caps for tubing? Old Scout 01-28-2004, 10:09 AM Originally posted by Jason R anyone make metal caps for tubing? I guess you didn't bother checking my link!:flipoff2: http://www.kingmetals.com/Pages/Page5.html http://www.kingmetals.com/Pages/Page30.html whatever 01-28-2004, 10:16 AM I have a bunch just let me know what size tube ie... 1 inch 11ga, 16ga, 18ga, etc....... And i'll throw them in the mail today! | |