|
NC Zuk 08-20-2003, 04:57 AM For some reason I cannot find anything saying what fuel pump to use on the 8valve swap. I saw two different pumps lastnight. a 1.5 to 4 psi pump, and a 4 to 7 psi pump. Which one is it? Also do I need a fuel regulator for it? I checked 3 different parts stores lastnight and I can't find a regulator. Any help would be appreciated. Oh yea, this is for a weber carbed application Rockrat 08-20-2003, 05:41 AM Hey Art I may be totaly Off But I would say get the 4-7# and then use the regulater to dial it in. Email Sean D. He can tell you for sure which one.. NC Zuk 08-20-2003, 05:44 AM Originally posted by Rockrat Hey Art I may be totaly Off But I would say get the 4-7# and then use the regulater to dial it in. Email Sean D. He can tell you for sure which one.. I CAN"T FIND A REGULATOR!!!!! :D Tusker 08-20-2003, 07:28 AM Art. I got mine from Trail Tough. Brent told me to save the cash, and just go to the parts store and get the lowest pressure pump I could find. I am not sure what the pressure on the pump I got was, but based on Brent's comment I would say the 1.5 to 4 lb version. I ran it without any regulator and it ran great (I have sincer switched to EFI). Mine was with the stock carb though. I would think the Weber would be the same but I don;t know for sure. You would only need a regualtor if you got a pump that had too much pressure. I would get the lighter one and put it on and try it, it should work fine. If not, you are only out $30 or so right? If you don't want to mess with it, order one from Brent. I am sure he knows exactly what you need to use for that application. jones 08-20-2003, 08:01 AM According to this site http://tellico.off-road.com/wwwthreads_uploads/1112835-Samurai%20FI%20tips.txt You should use a pump capable of producing 35 psi. So the two pumps you're considering probabley won't work. They're probabley intended for use in a carberated application. He mentions a Ford truck pump. I just swapped the Track/Kick pump into my Samurai tank.:D mossy oak zuk 08-20-2003, 08:07 AM i think arts is carb., isnt it NC Zuk 08-20-2003, 08:24 AM Originally posted by jones According to this site http://tellico.off-road.com/wwwthreads_uploads/1112835-Samurai%20FI%20tips.txt You should use a pump capable of producing 35 psi. So the two pumps you're considering probabley won't work. They're probabley intended for use in a carberated application. He mentions a Ford truck pump. I just swapped the Track/Kick pump into my Samurai tank.:D That is great info but it is for the efi set up. I'm gonna run a carb for a while until I get around to building that harness. thanks guys (and you too tusker :flipoff2: ) Tusker 08-20-2003, 02:31 PM Originally posted by Oswald thanks guys (and you too tusker :flipoff2: ) Your welcome. And BTW, go "articulate" yourself :flipoff2: | |