|
binjabr 12-04-2001, 05:26 PM hi any one know what (diff) I have on my truck. g m c (suburban)-1990- 2500 4x4 front(10)bolt -rear(14)bolt .semi-floating I want to be sure to order (Lock Right)for both.....the shipment is costly $200!!!!! one way. thanks Brad 12-04-2001, 09:02 PM wow thats trippy, i dont know about your question but i used to live in the U.A.E for 5 years in Abu Dhabi. that much for shipping sux. why not just weld it? binjabr 12-07-2001, 12:41 PM I think I will try to weld it to the chaises as you say:) I will be glad to get you back for a visit Brad . thanks anyway Brad 12-12-2001, 01:04 AM post this in General 4x4, it will for sure get answered. and you weld the spider gears, not the chassis sfazr2 12-19-2001, 11:03 PM You could weld the rear diff, but not the front. Also, if tires are expensive there, you wouldn't want to weld the rear diff because of the increased tire wear. Would be cheaper in the long run for the diff. KacksterK5 12-20-2001, 07:19 AM You are right about the diffs 10 ft 14 sf rear. Gears are probably 3.73 to 1 | |