Who's got'em, who wheels them?? TowSlut's?? POST IT!

DD that I just picked up for 800 bucks
http://invis.free.anonymizer.com/http://www.imagestation.com/picture/sraid76/p1157453b96853fa2b22cceef7dda22aa/fb4297ff.jpg.orig.jpg

TowSlut doing it's duty...
http://invis.free.anonymizer.com/http://www.imagestation.com/picture/sraid76/pb59fca86f6a00a8808cc08d4afb8c562/fb428433.jpg.orig.jpg

The TowSlut ready to cross the driveway that flooded with all the rain.
http://invis.free.anonymizer.com/http://www.imagestation.com/picture/sraid75/pd2f1aa3923b24f064159386839caaedb/fb5c2f8e.jpg.orig.jpg

PumpKin on the rocks at PA Jeep show(yes they are small rocks:D )
http://invis.free.anonymizer.com/http://www.imagestation.com/picture/sraid76/p1361706ae27e03de3bb9373d0dde5ef0/fb428431.jpg.orig.jpg

Who's got the love for the full size?? Camo, wheeling shots of your DD?? Mo, taken the MeanGreen off road yet?? BTW, PM.. you got it!

This is my POS. It is currentlly in the middle of dana 60 14 bolt axle swap.
http://steepndeep.dats.com/images/gallery/East%20Knox%20Canyon%20Trail/IM000599.JPG

How about a 65 Waggy with stock 327AMC . early custom fab lift. springs from unknown donor. Being restored back to like new.

Doncha love the rhino grill?


http://a4.cpimg.com/image/42/96/21312834-b8b6-0159013F-.jpg

Gotta do some body work on the back...Otherwise pretty clean


http://a2.cpimg.com/image/36/96/21312822-91b7-0225017B-.jpg

Made a FAWKIN newbie mistake. got her running like a top, no smoke or tapping..Felt like braggin so I called over some guys that said "no way is that cow pasture piece of sh!t ever gonna run." Was gonna show em.... Well, before the initial startup, I didnt check my wiring and sure enough, my initial run caused a major short somewhere. All the "important" wires were resting on the exhaust. So much for braggin!

Cary

http://www.dana60.com/images/chief1.jpg

Stealing, I mean, er getting this on Saturday. :flipoff2:

Nice big red Xs(ChiefSlapaHo), alot of people are getting those these days!! Nice cherokee, looks like the 79 I just picked up!!:D

[[B]Who's got'em, who wheels them?? TowSlut's?? POST IT!

I got a M725 with a 350 chevy, 420 trans, Brownie 28% over & under box, dodge 205 twin sticked. Finishing the replacement floor with 3/16" steel treadplate. Need to build a new gas tank. Gotta wait until January to buy 4 drive shafts.

Jeff Blackmer
Merriam, KS

http://www.dekonia.com/Images/ifsja/rig.jpg

Originally posted by Oxjockey

Stealing, I mean, er getting this on Saturday. :flipoff2:

dude i hate you :flipoff2: i want a Chief sooooo bad and i would like one that is not a cancer victom :D

Originally posted by CaryW
Doncha love the rhino grill?



I have the PumpKin set up with a rino front.. I'll have to post up a pic tonight.

Originally posted by hewl35
[ I got a M725 with a 350 chevy, 420 trans, Brownie 28% over & under box, dodge 205 twin sticked. Finishing the replacement floor with 3/16" steel treadplate. Need to build a new gas tank. Gotta wait until January to buy 4 drive shafts.

Jeff Blackmer
Merriam, KS


Now that sir sounds like it will kick a$$... the 715&725 are on my list to buy.

Not mine, but it belongs to a guy in my club... he's in the process of bobbing / coil conversion. He's already chopped the top doors.

http://www.muddyjeep.com/images/MVC-737S.JPG

ever since i bought a 77 chief for parts, i have wanted one for a daily driver/mild offroader

the chief i bought was shot so i couldnt do much with it except salvage all the usable parts so its spirit could live on in my CJ-5

looks sweet oxjockey

Originally posted by Jacob

looks sweet oxjockey

Thanks, but that's Sundowner's hard work.

Before:
http://www.dana60.com/images/monster.jpg

Mine: 76 J-10 258/3 speed needs serious help. No wheelin pix on this pc. Hoping for a cad 500 swap and 60/14 as soon as I get a dd. Need a cheep wiper motor (old style) if anyone has one. I have the other boggers just waiting to go on 'cuz I'm lazy and broke.

http://beyondhelp.no-ip.org/rain.jpg

I used to have a badass FSJ :( Now it's in my shop donating parts to my new rig (specs in sig)

http://www.joycarpets.com/andrew/teardown1.jpg

http://www.joycarpets.com/andrew/teardown2.jpg

Originally posted by Oxjockey


Thanks, but that's Sundowner's hard work.


Sundowner is getting rid of his rig... ahhh... I hope you decide to come over the IFSJA with that bad boy.... Looks pretty nice...

That Cherokee looks familiar... :D

Mikel

Ahh... my first Jeep. What to do with the poor thing...

http://www.msg4x4club.com/members/member_pics/jacobs_wag1.jpg

I still have it, though its sitting in a friend's yard waiting for the tranny to get replaced. Been that way since shortly after this pic was taken.

I've since taken the 35 mtrs off and put them on the TJ and put the 33 swampers on it. It will probably get the 35 mtrs back in a few months when I go bigger with the TJ now that isn't my DD.

Originally posted by redneckengineered
I used to have a badass FSJ :(


Badass it was.....RIP

I still have the vid of you powersliding around the corner and turning it on the lid :D


Here's a front shot of the PumpKin's porch swing that I made. I'ts a rear seat from a waggie and is VERY nice to sit on around a camp fire or under the tent at the PA Jeep show. Yes this was a weight test for it and it held up fine.

post the vid of him rolling man

i almost bought one but the dude sold it on me..

Originally posted by CoJon
post the vid of him rolling man

i almost bought one but the dude sold it on me..


Most form of human species would commonly request such a task with the word 'please' Are you a surfer?? Because in my best Sean Penn voice I could have sworn we where back at Ridgemont High :flipoff2:


Search.... it's some where out there on the internet :D


If I catch a minute tomorrow I'll shoot a link....

Originally posted by ChiefSlapaHo
If I catch a minute tomorrow I'll shoot a link....

Heres the link....

http://www.fsjworld.com/movies/mpegs/andrews_rollover.mpeg

Redneckengineered: I loved that rig! Are you planing to scrap it or is it just a temporary thing till you can find more parts?

Originally posted by 74_Chevota
Redneckengineered: I loved that rig! Are you planing to scrap it or is it just a temporary thing till you can find more parts?
He's building a tube chassis buggy like his sig says.... Selling off the majority of the parts except for the axle, engine, trans, seats, and fuel cell.

I believe he still has the cage for sell and the bumpers if you are interested...

Here's mine just got a few weeks ago for 660.00 ebay

my first FSJ 74 cherokee S
http://home.comcast.net/~myersdnd/jeep.jpg


not much going on with it yet..
I have a cj that needs to be on the road before I can make this a better rig. it does have the good stuff though

360
t18a
3.54's

etc etc

Originally posted by 74_Chevota
Redneckengineered: I loved that rig! Are you planing to scrap it or is it just a temporary thing till you can find more parts?

Thanks man, I loved the rig too, I was just ready for something smaller and lighter. It was really hard to take it apart and part it out. I was depressed for like two weeks (literally) lol. But, I'm all riled up on the new project now. Like SloWag said, I've sold everything except the cage, sliders and bumpers and they are still for sale. For the buggy I kept the 60s, seats, harnesses, fuel cell, and engine for myself. As for the body and frame, I'll probably end up scrapping it. I actually sold the trans too Slo, I'm got a 435 that I'm sticking behind the 360. I've just about got the whole drivetrain for the buggy ready to go. All I lack is my Klune V. I need to order that soon. My atlas came in a few weeks ago and my 1410 yokes came in today actually. Things are slowly but surely coming together. I plan on narrowing a razor grill for the front. It should be pretty trick.

Originally posted by SLOwag


Heres the link....

http://www.fsjworld.com/movies/mpegs/andrews_rollover.mpeg


thats fawkin funny.:laughing:

"thats right, iceman.............."

LOL, nice video!!! Good to know that we aren't the only folks that flop/roll on flat ground...

This thing hits the mall like nobody's bidniss!!! Just need some twice pipes and an airhorn and she's all done!
http://rps4wd.com/kw/frank.jpg

Great Jeep Guys I'm selling my CJ5 to finnish the M715 Mine can be seen on the M715 page under Frank

Originally posted by ChiefSlapaHo



Badass it was.....RIP

I still have the vid of you powersliding around the corner and turning it on the lid :D


Here's a front shot of the PumpKin's porch swing that I made. I'ts a rear seat from a waggie and is VERY nice to sit on around a camp fire or under the tent at the PA Jeep show. Yes this was a weight test for it and it held up fine.

holy shit!!! that yas you!

I'm such a dumbass... I never put two and two together

I was takin pics of your "anatomically correct" timing chain people :D

here's my new daily driver

$1800 to get it home

a few hours to debug a couple electrical problems and its sweet.

Now I've just gotta score a tan power driver seat (busted frame) or take a weekend to dismantle and repair it


all the windows work! tailgate included.... now if I could just get the tailgate to open :rolleyes:

http://hometown.aol.com/blockheadeighty/images/j20.jpg

And I wheel the snot out of it. DD is an '82 waggy that I'm collecting 35s for.
Here's my buddy Kev's...

http://hometown.aol.com/blockheadeighty/images/flexy%20chief.jpg

Originally posted by HybridPOS
LOL, nice video!!! Good to know that we aren't the only folks that flop/roll on flat ground...

Haha, you got that right. You ain't hardcore till you start flopping on flat roads :rolleyes: :)

My '85 is up for sale. Looks bad, runs great.

I just need to solve the tranny leak first. :mad:

Well, if anyone is looking for an M715, I have one for sale. One day, when I get some time away from work, I am going to put it on e-bay. Would love to keep it, but just not enough time, and doesn't make a good family rig.

Mark

Originally posted by redneckengineered
I used to have a badass FSJ :( Now it's in my shop donating parts to my new rig (specs in sig)


I loved that thing even the rally roll over

Thanks man, it was one hell of a rig. Went everywhere I pointed it. It'll live on in my new rig. It's donating the heart and axles :)

I have one, but I'm an internet idiot and I don't know if I have pics hosted, and I don't know how to link them... I can email pics if anyone wants.

Specs:
1972 Wagoneer
360-stock
th400-stock
dana 20- stock
3/4 ton junk (10 bolt front 14 bolt rear)
both diffs welded, 4.10 gears
Spring over suspension
new rear hangers add 3" of wheelbase with 56" chevy springs
full hydro steering
disc brakes
bald 35's... and no future plans :D

Here is my FSJ project.

http://froadin.com/pascal/m715_wag1.jpg

Can't see the desert camo paint job under the coat of mud but it's there.
http://www.fullsizejeeps.com/jeeps/files/1963-1983-Wagoneers/Muddy1.JPG
80 Wagoneer limited
everything stock but the 31's I roll on and the headers.:D

There's some nice looking FSJs out there... Here's a pic of my driveway queen
http://www.fullsizejeeps.com/jeeps/files/bvibert/BVJ10.jpg

Keep 'em comin!!! Here's my 78 waggie.....
http://home.earthlink.net/~dannyboon/RB_Tweak640/RBTweak29001.jpg

Going thru some major mods right now.... 1 ton junk and stuff....

You can see a couple of recent pics in my webshots below. I just got my 44044 fronts today and my rear shackle inversion brackets today. Thanks Todd!

I am going to hang some chevy 1/2 ton springs in the rear. Trying to stay short and as little sprung weight as I can. So along with the doors and bed, I think the fenders are next.
Plan on a SMALL flat bed with some rails. Just enough to hold my cell, a spare and maybe a cooler? Moved the axles out around 3" each, and shortened the frame 12". If my early measurments are correct, I should be some where around 107-109' wheelbase.
1410 front shaft and 1350 rear. Hopefully will have the springs in so I can get the shafts finished. Maybe some newer pics over the weekend. Dennis

Andrew (redneckengineered) , I still cant believe you are scrapping it, but power to ya for going buggy route. I should really change the creen name, ive been through quite a few vehicles since 429 4x4. Whats the crawl ratio gonna be w/ the Atlas and Klune V

My '80 J-10

http://www.fullsizejeeps.com/jeeps/files/1963-1987-Pickups/bigblue6.jpg

Adam:)

lets see... this is my waggy
http://www.4wheeler.ca/gallery/Readers/100_1491_sized

I have a 74 wag that I am going to build as trail rig with a caddy 500. Right now It has 500/th400/D20 D44s, 33" MTs. Alot of work to go.

Heres a pic of my 73.

http://home.attbi.com/~tempestman/images/73_wag/73_Wag_1.jpg
More pics of my 73, my 74 and other jeeps can be found on my website http://home.attbi.com/~tempestman/


Evan
72, 73, 74 Wags, 69 J3k
http://home.attbi.com/~tempestman/

Here is a side shot
http://www.fullsizejeeps.com/jeeps/files/1963-1987-Pickups/bigblue2.jpg

Adam
:)

Originally posted by CheapXJ


holy shit!!! that yas you!

I'm such a dumbass... I never put two and two together

I was takin pics of your "anatomically correct" timing chain people :D


Yup that was me :laughing: I'm not a hard one to pick out in a croud

Well, I'm about prepared for Izzy to blow in town for a couple days, I'll post up a pic of the preparation.

Originally posted by tuckster
I have one, but I'm an internet idiot and I don't know if I have pics hosted, and I don't know how to link them... I can email pics if anyone wants.

Specs:
1972 Wagoneer
360-stock
th400-stock
dana 20- stock
3/4 ton junk (10 bolt front 14 bolt rear)
both diffs welded, 4.10 gears
Spring over suspension
new rear hangers add 3" of wheelbase with 56" chevy springs
full hydro steering
disc brakes
bald 35's... and no future plans :D

Send them to me... Chief@pirate4x4.com

KYJ10 ( Dennis),

Glad the kit got to you with all the shipping troubles as of late! :D

Your J is coming along AWESOME!!! I have some shock mount fabbing to do, get my driveline mods done and bleed the brakes and take her to the testing grounds! That dosent include the bodywork yet..... I want the flares to come out nice, so I'm taking my time... gotta a buddy thats a longtime bodyman that is going to help with the install and lead them in... the RIGHT way.... then the paint...

Here's my lawn ornament. Currently stock. :(


http://users4.ev1.net/~glawson/j10_01.jpg

http://www.fullsizejeeps.com/jeeps/files/1974-1983-Cherokees/GotRocks.jpg
and half doors :p

I be here.
Rock On !!

http://home.comcast.net/~rbrent5/wsb/media/88831/graphic_pub.jpg

;)

FSJ's kick ASS.

I'm in the middle of my conversion and am already changing my game plan. It was a 59 Wagon on top of a 76 Wagoneer, but I've now opted for a 53 Truck on the 76 Wagoneer, it will be convertible (hardtop and soft top), fully caged, and 2' bobbed bed, sitting on 37' MTR's. It will be done by christmas. Pic's to follow.

Originally posted by sammeeks351
http://www.fullsizejeeps.com/jeeps/files/1974-1983-Cherokees/GotRocks.jpg
and half doors :p
Damn you sambo because of you Half doors are next on my list of things to waste money on.. I am buying new doors just to cut them apart.. but damn your looks kick ass.. nice work!

My driveway queen. Was almost finished into a dd/tow rig/hauler, but plans have changed, and i'm going big.

http://www.fullsizejeeps.com/jeeps/files/1963-1987-Pickups/Humpj20flex.jpg

http://www.froadin.com/chero/chero_trail4.jpg

http://www.froadin.com/images/jeeps.jpg

http://www.panther4x4.com/Trails/11.JPG

My tow ho

Originally posted by gp_frk
Here's my lawn ornament. Currently stock. :(


http://users4.ev1.net/~glawson/j10_01.jpg

gotta send in pictures of the little bro's too!

Cross post from Chit Chat as well... Izzy thread

Circled the wagons tonight.... bring it awn Izzy. I will post up photo by photo and seek any damage as well. I hear the local 7-11 has boarded up completely :Laughing:

http://invis.free.anonymizer.com/http://www.imagestation.com/picture/sraid79/p97574c3d81fb39c42f876892177e6b8a/fb1201c9.jpg.orig.jpg

Brought the cream of the crop up and away from falling trees. Plenty of gas for the generators and beer in the fridge. Bring it.

Who else is doing what to protect their FSJ's??


for the folks at IFSJA that are joining in with us and aren't regulars.. Welcome :flipoff2:

a big :flipoff2: to you too Chief

Enjoying the little icons not available on the IFSJA as you know... ;)

Cheif you get one of these brother :beer: Definitly a site to see.

Originally posted by SLOwag
a big :flipoff2: to you too Chief

Enjoying the little icons not available on the IFSJA as you know... ;)


:laughing:

I do my best....


BLT2crl, I'll drink that one and raise another in your name :D





Has Mo or Camo joined yet :confused: Sup wit dat :flipoff2:

Originally posted by ChiefSlapaHo
Cross post from Chit Chat as well... Izzy thread

Circled the wagons tonight....Brought the cream of the crop


ummm wheres mine???? :D you left it as tree fodder didnt you :flipoff2:

Originally posted by usmcdoc14



ummm wheres mine???? :D you left it as tree fodder didnt you :flipoff2:



I'm sorry........ I must not have 'seen' it :flipoff2:

Originally posted by ChiefSlapaHo
Has Mo or Camo joined yet :confused: Sup wit dat :flipoff2:

They don't want to be associated with us.. i see how it is.... :flipoff2:

Originally posted by SLOwag


They don't want to be associated with us.. i see how it is.... :flipoff:


:eek: What brought that on?

Originally posted by SLOwag


They don't want to be associated with us.. i see how it is.... :flipoff:

*shakinghead* don't confuse :flipoff2: with :flipoff:

Originally posted by Bald1


*shakinghead* don't confuse :flipoff2: with :flipoff:

ya no shit , good way to join the Band :flipoff2:

Here's a recent pic of me with THE BEAST. http://www.fullsizejeeps.com/jeeps/files/Self-portraits/ScotteacTHEBEAST.jpg

Here's another beer in your honor Chief. Cool site here.

Originally posted by usmcdoc14


ya no shit , good way to join the Band :flipoff2:

DOH.. i type mine in i forgot the 2... hows this :flipoff2:

Originally posted by big4294x4
Andrew (redneckengineered) , I still cant believe you are scrapping it, but power to ya for going buggy route. I should really change the creen name, ive been through quite a few vehicles since 429 4x4. Whats the crawl ratio gonna be w/ the Atlas and Klune V

Sup man, final crawl is coming in at 358:1 since I ditched the 727 in favor of a NP435. But, I have 16 forward gears so I've got just about every ratio I could ever want. Basically I'm pumped as hell :)

Everybody else, good to see the FSJ guys representing. Chief, I've never seen that many Wags in one spot that had the same owner. DAMN MAN! They are nice too.

heres an old one pre-roll
http://www.csulb.edu/~ghobbs/pics/jeep%20rock.jpg

and one after
http://www.csulb.edu/~ghobbs/pics/roll/after.JPG

Originally posted by SLOwag


They don't want to be associated with us.. i see how it is.... :flipoff2:


I posted up...

Green de-woodied GW in a parking lot. Look up.

Originally posted by Mo



I posted up...

Green de-woodied GW in a parking lot. Look up.

yeah I saw your sorry I mainly ment Camo.. but I have seen him post his before too.. We are just one big FSJ family here ;)

I think I finally have this figured out...http://www.4wheeler.ca/albums/Readers/100_1491_sized.jpg

welded 60 rear
trashlocked HD44 front
360 with quadrajet, TFI and 3.25" dual flopros
th400/quadratrac
2" BL, 5" susp
38.5 pizza cutters
cut up, gutted, rusted, dented, stretched wheelbase....

Originally posted by Bald1
I think I finally have this figured out...

welded 60 rear
trashlocked HD44 front
360 with quadrajet, TFI and 3.25" dual flopros
th400/quadratrac
2" BL, 5" susp
38.5 pizza cutters
cut up, gutted, rusted, dented, stretched wheelbase....
That is lookin' pretty badass man.. Nice work! :beer: :grinpimp:

my daily driver chillin with me at the outer banks:

http://www.paradise.raleigh.nc.us/album/obx/abf.sized.jpg

82 wagoneer, stock, '93 4.0L swapped in. its a daily driver but it did manage to make it through trail 5 at tellico to fain's ford.

I bought this bad boy for 50 bucks back in Feb 03. I ve driven it daily since it was real straight body wise when I got it....The woods are tight around here and it just doesnt seem to fit :flipoff2:

http://www.fuelie.org/sigs/uploaded/beatupdd.jpg

Shane, I'm working on yours :eek: their huge.

FSJ WALLPAPER??

Here's mine... this is our drive way after a wicked storm that passed about a month ago. I'm sure Izzy will claim it again shortly.


http://invis.free.anonymizer.com/http://www.imagestation.com/picture/sraid75/pd2f1aa3923b24f064159386839caaedb/fb5c2f8e.jpg.orig.jpg

Hey Chief how about some pics of you internal cage? I saw a pic before but it looked stout.. How's it for Head room? I seems like that would be a problem if you were to put some triangulation in above the front seats. Thanks.

Originally posted by ChiefSlapaHo


Send them to me... Chief@pirate4x4.com

I sent you the pics, are you going to post them? :confused:

Originally posted by tuckster


I sent you the pics, are you going to post them? :confused:

Beep.

We're sorry, but the Chief is busy saving his ass from this little rain storm that's coming in off the ocean. He should be back in a few days.

Thanks for calling.

<click>

Originally posted by tuckster


I sent you the pics, are you going to post them? :confused:

Yes... two post up. I have to resize them. Nice cookies :D

Originally posted by Mo


Beep.

We're sorry, but the Chief is busy saving his ass from this little rain storm that's coming in off the ocean. He should be back in a few days.

Thanks for calling.

<click>



:laughing: Thanks Mo, stuff is getting freaky down here. I have moved more FSJ's up from the yard to be out of harm's way. I hope it doesn't get the two moon roofs I have there. I'll post up when I can but for the next couple of day's will be up in the air.

Hurricane updates on chitchat

Originally posted by ChiefSlapaHo
Cross post from Chit Chat as well... Izzy thread

Circled the wagons tonight.... bring it awn Izzy. I will post up photo by photo and seek any damage as well. I hear the local 7-11 has boarded up completely :Laughing:

http://invis.free.anonymizer.com/http://www.imagestation.com/picture/sraid79/p97574c3d81fb39c42f876892177e6b8a/fb1201c9.jpg.orig.jpg

Brought the cream of the crop up and away from falling trees. Plenty of gas for the generators and beer in the fridge. Bring it.

Who else is doing what to protect their FSJ's??


for the folks at IFSJA that are joining in with us and aren't regulars.. Welcome :flipoff2:



hey, ya left a window open :flipoff2:

Originally posted by ChiefSlapaHo
for the folks at IFSJA that are joining in with us and aren't regulars.. Welcome :flipoff2:

Thanks :flipoff2:

I'm very envious of your collection!

I suspose I should post up a pic of my blue pile of crap!:flipoff2:

Hopefully it will be back on the road soon!:(

http://www.gwamp.com/pictures/bluebeach.jpg

thanks Chief, good luck with the weather over there...

here's my '83 J-10
got it for $500. in 2001:http://www.fullsizejeeps.com/jeeps/files/1963-1987-Pickups/Front3-4.jpg

1983 Cherokee Pioneer
6 Cyl/4wd
American Racing wheels
BFG Rubber
Decent Paint Job
Bronze Tint
and a broken CARTER (P.O.S.) Carb



http://images.cardomain.com/member_img_a/227000-227999/227138_72_full.jpg

-Cheers,

ELI
SoCal area

There is a two door here for sale for $350. Don't know the year, but it's a I6, manual trans, drivers D44 front, HDAMC20 rear, lockout hubs on front, centered rear. Can anyone give me some info on this setup or do you need the year, # of gears...?


I'm am really wanting to stuff rockwells and 44s under something, so why not something that's already overweight?!?

Originally posted by squirriljeep
There is a two door here for sale for $350. Don't know the year, but it's a I6, manual trans, drivers D44 front, HDAMC20 rear, lockout hubs on front, centered rear. Can anyone give me some info on this setup or do you need the year, # of gears...?


I'm am really wanting to stuff rockwells and 44s under something, so why not something that's already overweight?!?
80' to 83' cherokee.
that fits the description of my cherokee in stock configuration and mine came with 3.31:1 axle gears.

Good call on going with rockwells and 44's. I'm building my bitch up with 35 spline dana 60's, 40" mtr's, soa front, 4 link rear. I'll get some pics soon.

Originally posted by squirriljeep
There is a two door here for sale for $350. Don't know the year, but it's a I6, manual trans, drivers D44 front, HDAMC20 rear, lockout hubs on front, centered rear. Can anyone give me some info on this setup or do you need the year, # of gears...?

That'd be a 258 with the BBD carb, with a T176 (4spd) or T5 (5spd), NP208 transfer-case (that's a definite) and 2.73 or 3.31 gears.

That's a mileage-champ for sure (20mpg+ highway).

Im here.

Those of you in California have probably seen my '89, I'll get a better picture up here soon for the rest of you.


http://www.fullsizejeeps.com/jeeps/files/Kris-Tholke/KrisWag1.jpg


360, 727, 208, d44x2/3.31's, 33x10.5 BFG/AT's, Full MSD, Engle Cam, Flowmaster 50 Delta, 2" of Add-A-Leaf, etc...

kris.

Got this yesterday...What a blast to drive.

Cary


http://a6.cpimg.com/image/A4/D3/23671716-4c3b-028001E0-.jpg

Originally posted by CaryW
Got this yesterday...What a blast to drive.

Cary


http://a6.cpimg.com/image/A4/D3/23671716-4c3b-028001E0-.jpg

here ya go cause i am nice,and because i hate you for having that and not me :flipoff2:

Originally posted by Bald1
I think I finally have this figured out...http://www.4wheeler.ca/albums/Readers/100_1491_sized.jpg

welded 60 rear
trashlocked HD44 front
360 with quadrajet, TFI and 3.25" dual flopros
th400/quadratrac
2" BL, 5" susp
38.5 pizza cutters
cut up, gutted, rusted, dented, stretched wheelbase....


how wide are those? 10.5? No knock, just wondering. I'm thinking of cutting some pizza too.

They're 38.5" 11s on 7x16 rims....work really good all around except in really deep stuff. They'd probably be a bit fatter on 8" rims...

http://tellico.off-road.com/wwwthreads_uploads/1190189-woods5.jpg
one more FSJ, its a 72 good to see so many

:D

Finally.... sorry it took so long Shane, Isabel did a number on us.

Nice pic's

Nice set up... what's up front??

thanks Chief

I think I already listed specs..

the front is a gm10 bolt with welded diff and stock 4.10's and a 2x8 ram... we'll see how long those ball joints last.. :D

rear is a 14 bolt, also welded, needs shaved
the rest of the d-train is stock, 360, th400, d20
driveshafts are custom farmer-edition shafts :D
tires are some 35's I picked up for free
wheels were also free, hence the mis-match in color... they're 16's...
and the cookies are oreos :D
i'm a newlywed

but here's the recipie for the 1:1 scale toy I've been working on.

Take one '78 Cherokee:

http://home.off-road.com/~wagoneer/cherokee/stuff01.jpg

Chop some I-beams to make a winch-bumper (since you can't buy anything pre-made):

http://home.off-road.com/~wagoneer/cherokee/winch12.jpg

Slide this in front for a bolt-on SOA with 7-leaf waggy springs, with a matching 14-bolt bolted to stock springs on lowered spring perches and inverted-shackles in back:

http://home.off-road.com/~wagoneer/cherokee/d60_10.jpg

Bolt on some old Michelins:

http://home.off-road.com/~wagoneer/cherokee/xml10.jpg

and run the power from a warmed-over 360 through this setup:

http://home.off-road.com/~wagoneer/cherokee/np205_01.jpg

Only tricky part is going to be keeping the axles from wrapping-up bad with the soft springs.

Started my FSJ choptop and its turnin out pretty good so far. Gonna install D60 rear/HD44 front, high steer and new 360.
http://www.imagestation.com/album/?id=4288990397

1979 Cherokee...
Toyota Land Cruiser Diffs, GearBox, Searing, A/C.. Toyota Deisel B2 Engine.. Converted RHD..

She looks a tad different with a new coat of paint, but you get the idea.

here's mine. its my dd/trail rig. soon to have a chopped,caged, SOA,one-ton, full-size chero...in the summer

http://home.comcast.net/~mammothmachine/wsb/media/71767/site1059.JPG

Awesome thread...Love the pics. Makes a fella want to build up a fullsize himself :)

Hey Bob, when are you going to have that thing done? I want to see completed pics!!!!

Originally posted by 1BDYJ
Started my FSJ choptop and its turnin out pretty good so far. Gonna install D60 rear/HD44 front, high steer and new 360.
http://www.imagestation.com/album/?id=4288990397


Looks sweet, any plans for closing in the rear or leave it go..

Another shot..

check webshots.....there's a couple of pics of the bikini top I fabbed.

almost done with my current project..

http://gfsj.org/forums/index.php?&act=Garage&CODE=14&type=garage_gallery&id=80

http://gfsj.org/forums/index.php?&act=Garage&CODE=14&type=garage_gallery&id=79

its a 77' wagoneer.

Poser pics of my '83.
440, 4.88 D60's F&R on 40 boggers

Nice coiled waggie BigWoodWag!!! SWEET

Don't have any pics at my fingertips, but I have an FSJ driver/hauler/tow pig.

1968 M-715 with a Cummins 5.9L turbodiesel, NV4500, NP-205 powertrain stolen from various year Dodge trucks. Springover front, shackle flip/blocks in the rear. Running 42" tall 11R22.5 BFG truck tires on custom wheels.

It'll run 90 on the freeway and it flat out scares the crap out of people when I tailgate em. :D

http://www.fullsizejeep.com/1024/pics/gallery/209%20small%20climb.jpg

I picked up a new toy since last posting to this thread... My Mall Cruiser.

I picked up a new toy since last posting to this thread... My Mall Cruiser.

Chief - What ever happened to the J-Series you picked up from me? BTW, thanks again for the tranny!! - Fritz

My 66 in it's current state of disrepair...or rerepair...or sumthin...

http://www.imagestation.com/picture/sraid115/pc407a7f777d21160cb92b80c3ffc7a1c/f8c0e40f.jpg

Poser pics of my '83.
440, 4.88 D60's F&R on 40 boggers

Looks good. What coils are you using?

Chief - What ever happened to the J-Series you picked up from me? BTW, thanks again for the tranny!! - Fritz


No problems on the tranny.. The J-truck is very interesting... It seems to be an import due to the fact that it had additional lights in place of the buckets for the Rino grill set up. Currently a very large black snack has made it home :D

BTT for RidgeRunnerRas!

Here is my piece '67 M715/J-10

http://65.167.18.17/TidewaterFourwheelers/Pauls715.jpg

Here is my piece '67 M715/J-10

http://65.167.18.17/TidewaterFourwheelers/Pauls715.jpg


Sweet! Nice rig... Your close too, need parts??

here is my roommates (Marine02) 84 waggy.... 401/727/d300
http://www.wreckincrew.org/graphics/crew/P1000658.JPG

Thats a sweet ride that dude is the bomb

how much lift and how big are the tires? that thing is badass!!

38.50 Super Swampers, and it has a 6 inch lift, with a rear shackle revesal and an 1" extended front shackle.

here's a little video of the blue 77' choptop
http://www.fullsizejeeps.com/jeeps/index.php?action=downloadfile&filename=rallyFSJ.wmv&directory=movies

http://www.fullsizejeeps.com/jeeps/index.php?action=downloadfile&filename=ctrock.wmv&directory=movies

here is the 88' in its current re-build state
http://gfsj.org/forums/uploads/post-7-1101678215.jpg

here is two more pics

got stuck in between the walls at tellico
http://gfsj.org/uploads/members/youngjeeper/tellico%20/carnage/2.jpg

testing my roll point
http://gfsj.org/uploads/members/youngjeeper/tellico%20/carnage/3.jpg

When were you at Tellico? Your Jeep is the shit.. my next project is to cut my roof and put a roll cage like yours.

the weekend before dixie run. that ride is what helped me decide to break down and re-build up the woody 88'. was goin up slickrock messed up my rear locker and broke my 2nd spring mount from those damn 6" SUA springs. SOA is the way to go

I was up there for the Dixie Run but my trash wasnt runing so I was just checking everything out

Heres my project. Beleive me this thing is gonna change!
http://www.fsjworld.com/gallery/yeap74/82959.jpg

Thanks Chiefslapahoe. Yeah I need parts. Parts from Jesse at OnetonCV. I'm saving up the cash to buy the 1410 yoke for the NP205, 1410 driveshafts front and rear, and the NP205 emergency disc brake. Other then that all I really have left is little stuff. Gas lines, brake lines, a little wiring and some interior work.

PaulC

Thanks Chiefslapahoe. Yeah I need parts. Parts from Jesse at OnetonCV. I'm saving up the cash to buy the 1410 yoke for the NP205, 1410 driveshafts front and rear, and the NP205 emergency disc brake. Other then that all I really have left is little stuff. Gas lines, brake lines, a little wiring and some interior work.

PaulC

Good deal... getRdun!

BTT for RidgeRunnerRas!
Thanks Chief for postin my truck in this thread

Thanks Chief for postin my truck in this thread

No problem, anyone else with out a star can send them to me and I will post them as well.

ChiefSlapaHo,

Thanks for posting. Your the man.

PaulC

My DD

Here are my pics from the 2004 FSJ invasion
http://community.webshots.com/album/150127421JLCIgm

I Need this.... :laughing:

These are some of my favorites
http://www.kostic.org/images/big_j10.jpg

http://www.kostic.org/images/1234.jpg

btt. :)

My J10 made it into a 4page article in FSJ Magazine availble at Barns and noble
Carl

My J10 made it into a 4page article in FSJ Magazine availble at Barns and noble
Carl

I saw your rig in there. Cool beast!

Are you serious, though, that B&N has picked up the distribution of FSJ Magazine??? That would be an incredible boost. :D

yes B&N has them all over the Country I have friend from west to east that have found them there

http://img.photobucket.com/albums/v630/MocKKnighT/Chief/DSC01489.jpg

My FSJ :D Only has 3k on a rebuilt 401. Now only if i could get my damn carter AFB to work

Now only if i could get my damn carter AFB to work

How about if you could actually get a pic so we could see it :idea:

http://img.photobucket.com/albums/v630/MocKKnighT/Chief/DSC01489.jpg

My FSJ :D Only has 3k on a rebuilt 401. Now only if i could get my damn carter AFB to work

What problems is it giving you? I'm very happy with the performance of the Edelbrock 1400 on my wife's Grand Wagoneer. It's obvious why the design would suck off-road, but I think even that could be remedied; it's just a lot harder than on a Holley or Q-Jet.

Yeah I agree that the edelbrock is a much better carb than the Holley or the Quadracrap

Before i tore it down to rebuild it, the floats appeared to be sticking because it would stumble when I would turn. Now i that i have rebuilt it there is gas comming out the right hand size of the carb right by the vac piston.

So I tore it down again but when I bolted it back something had gone wrong w/ my starter and it wouldn't turn over. Now I gotta fix my Starter prob before i know what is wrong w/ my carb. I was thinkin i could have go the wrong rebuild kit. I got one for an Edelbrock 1406/afb kit for it. So i Think i might have got the wrong kit. I'm only 18 so Carbs are kinda before my time so this is my learning exprience.

Before i tore it down to rebuild it, the floats appeared to be sticking because it would stumble when I would turn. Now i that i have rebuilt it there is gas comming out the right hand size of the carb right by the vac piston.

So I tore it down again but when I bolted it back something had gone wrong w/ my starter and it wouldn't turn over. Now I gotta fix my Starter prob before i know what is wrong w/ my carb. I was thinkin i could have go the wrong rebuild kit. I got one for an Edelbrock 1406/afb kit for it. So i Think i might have got the wrong kit. I'm only 18 so Carbs are kinda before my time so this is my learning exprience.

The trick is to set the float so that it is parallel with the carb-top when it's at the right height. If you only set the tip of the float to the correct height, but the rest of the float-body is tilted, your float-bowl fuel level will be wrong.

The only things that you need right are the inlet needle-and-seats and the gasket. I have no idea whether the ones in the kit you got fit your carb correctly.

The reason that carb is so bad off-road is because of the float-bowl design. Many carbs stumble or stall at angles because fuel from the float-bowls pours uncontrollably out of the float-bowl vent when the truck is at an angle. This can be made worse when the float is bouncing all over the place, causing the fuel-inlet valve to be open, overfilling the float-bowl and causing fuel to pour out the vent.

Q-Jets are so good in this regard, because they only have a single central-mounted float-bowl, and you have to REALLY have the truck at some insane angle for the fuel to pour out the vent. Plus, the float-bowl is baffled and the float is in the center of the bowl, so you basically have to have the truck upside-down before the float hangs open.

Holleys have front and rear mounted float-bowls with separate vents that are tubes sticking straight up with a top cut at an angle. Those can be replaced with plain hard-tube, and easily tied-together by a piece of fuel-hose with a notch in the top. Holley's truck avenger carb does this with a single piece of hard-tube that has vent holes along the top. Even if fuel starts trying to come out the vent, it stays in that fuel-line rather than pouring into the venturis. You can also get a spring-loaded inlet valve to avoid it hanging open due to a bouncing float.

AFBs/Edelbrocks almost seem DESIGNED to stall out at angles. They have two side-mounted float-bowls, joined by a connecting passage. Even at a moderate side-angle, fuel from one float-bowl pours through that connecting passage to overflow the opposite float-bowl. Even worse, the float-bowl vent is not a tube, but rather an irregular open passage in the top of the carb casting. There is a spring-loaded needle-and-seat to prevent the float-bowl from overfilling due to a bouncing float, but that is only part of the solution. The real solution would be to block the fuel from pouring through that connecting passage, and then fashioning some tubes to fit tightly into those irregular-shaped vent holes, and then tying the two vent-lines together with a tube or hose to prevent any fuel that came up through them from pouring into the venturis.

http://www.kostic.org/images/image015.jpg
http://www.kostic.org/images/image016.jpg
http://www.kostic.org/images/image017.jpg
http://www.kostic.org/images/image018.jpg
http://www.kostic.org/images/image019.jpg
http://www.kostic.org/images/image020.jpg

http://www.kostic.org/images/image009.jpg
http://www.kostic.org/images/image010.jpg
http://www.kostic.org/images/image011.jpg
http://www.kostic.org/images/image012.jpg
http://www.kostic.org/images/image013.jpg
http://www.kostic.org/images/image014.jpg

Ok Cheif SlapaHo This one is for you
http://www.kostic.org/images/image003.jpg
http://www.kostic.org/images/image004.jpg
http://www.kostic.org/images/image005.jpg
http://www.kostic.org/images/image006.jpg
http://www.kostic.org/images/image007.jpg
http://www.kostic.org/images/image008.jpg

Since I can finally post, I thought I'd chime in.
Other folks have already posted pics of my tow truck and my M725 ambulance.
And that's me in my CJ-5 behind youngjeeper, waiting for him to get unstuck.

Here's my M715:
http://www.geocities.com/ncjeepers/Vehicle_Pics/M715.jpg

Can you call this an FSJ?
http://www.geocities.com/ncjeepers/Vehicle_Pics/tug_1.jpg

shitty pic of my old waggy. was such a fun beater :grinpimp:

http://www.newjo.org/NEWJO/albums/album02/715rally.sized.jpg
Heres mine

No pics yet I am in the process of putting a J20 cab and front fenders on a 76 cherokee frame with the J20 axles and a twin sticked D20. The reason for putting J20 cab on cherokee frame is cherokee floor pan was rusted out and didn't notice till we had axle swap finished. J20 had as much rust but less of it to repair. Eventully it'll run on propane with a short flat bed and an exo skel.

I just picked up a J-10 and Im trying to fit 38's under it. I didn't want to soa the front so I picked up some 4" springs from rustys. The fenders have to be trimmed a lot, I was thinking Id copy "panel hack" from JP mag. I'm not too serious about this rig, but you never know.

guess I never posted my junk in this thread. here she is...

http://www.ee.nmt.edu/~offroad/images/picKLE-cache/7-5-04/p7051303_640.jpg

http://www.nmvjc.org/members/robselina/image_1.jpg

http://infohost.nmt.edu/~rselina/quebradas7.JPG

Anyone know where to get a good deal on a D.U.I. distributor for an AMC 360?

Is the amc 20 in my J-10 worth putting a spool in, or should I just swap it for something bigger?

Mine is green.
http://www.gljt.org/modules.php?op=modload&name=My_eGallery&file=index&do=showpic&pid=714&orderby=dateA


I don't have any pics of my J10,,,it's camera shy,,,,won't come out of the garage.

Keep'n the thread alive. Don't have any pic's of the Cherokee being rebuilt but when I get the drivetrain put back in, I'll put up some pic's. It's a 79' Cherokee W/T with a warmed up small block 350, TH400 tranny, D20 transfer case with the Tera Low 3.15:1 kit and it's twinsticked. D44 front and rear (stock 3.54 gears) on 35x14.50x15 Boggers. Lifted 5" front, 4" rear.

I haven't looked through this thread to see if this one is in here or not, but I'm positive that these pictures aren't....since I took them. :p

It's not mine, but it is the FSJ that made me want to go out and buy one.

http://www.projectxj.com/images/trail.runs/11.21.04-toysfortots/images/IMG_5271.jpg

http://www.projectxj.com/images/trail.runs/11.21.04-toysfortots/images/IMG_5272.jpg

http://www.projectxj.com/images/trail.runs/11.21.04-toysfortots/images/IMG_5273.jpg

I don't know much about it. 35 spline 60 front, 70 rear or 14 bolt?, and 40" MTRs.

http://www.projectxj.com/images/trail.runs/11.21.04-toysfortots/images/IMG_5272.jpg

Sick lookn rig. I have never seen anyone else run their tank like that. Instead of a tank though, I'm going to be using an aluminum box that drops in and sits flush with the floor. It will have a hinged top and will house all of my spare accessories.

Keep'n the thread alive. Don't have any pic's of the Cherokee being rebuilt but when I get the drivetrain put back in, I'll put up some pic's. It's a 79' Cherokee W/T with a warmed up small block 350, TH400 tranny, D20 transfer case with the Tera Low 3.15:1 kit and it's twinsticked. D44 front and rear (stock 3.54 gears) on 35x14.50x15 Boggers. Lifted 5" front, 4" rear.
dont lie you dont have a jeep.

lets see some pics.

dont lie you dont have a jeep.

lets see some pics.

I know this has to be Garrett. :rolleyes: I'll snap some pic's of the new engine and drivetrain for ya in the next few days so :flipoff2: :grinpimp:

http://home.mchsi.com/~bigyjnick/Crawfish_054.jpg
http://home.mchsi.com/~bigyjnick/Crawfish_057.jpg

Here's the new DD/Tow rig. Glad to be in the FSJ family!

I know this has to be Garrett. :rolleyes: I'll snap some pic's of the new engine and drivetrain for ya in the next few days so :flipoff2: :grinpimp:
gee, howd you guess? :flipoff2:

its about time man, im preppin the rocks for install so you better hurry up.

gee, howd you guess? :flipoff2:

its about time man, im preppin the rocks for install so you better hurry up.

Sounds good. Do you have any aftermarket stuff off of the D44's you were running? I'm looking to run these axles until I either blow one comletely up or finish the 14 bolt/D60 build. I figure if I throw in some lower gears and possibly some aftermarket shafts that should hold me for a season or two. I'll be sure to upload some pic's of the new engine and such when I get back from vacation this weekend.

Bump

Here's my FSJ

http://i5.photobucket.com/albums/y174/bANGr/ASP060405/IMG_2794.jpg

http://gfsj.org/uploads/members/youngjeeper/new/489a.jpg

here is my 88', did a lot of work on it from before. big difference over the 6" lift springs

spring over/shackle flip
np208
4.88 gears in the d44's
36's
custom bumpers by me
2" body lift
new driving lights
2" wheel spacers

gonna be doing a lot more now after breaking the rear axle shafts :flipoff2:

this winter ill be doing something about the axles, changing up the suspension again (eliptical, coils), in cab cage, hydro assist, front locker. prolly go with bigger tires too (40")

http://i7.photobucket.com/albums/y258/fourcyljeep/IM001491.jpg

Just finished up redoing all the wiring. I put a good set of gauges in it. It will serve as daily driver/tow rig as quick as I get it registered...

Its an 82 J-20.

No wheeling pics yet, more to follow after its registered.

Ok Garrett, this ones for you. This was my parts Jeep that I snagged the sbc 350, TH400, Dana 20 w/ Tera Low 3.15:1 gears, 4" Skyjacker lift and wiring harness from. Once the rig was pretty much stripped, I sold it for a couple hundred bucks to a guy who plans on using it as a test rig. He is starting a business making conversion kits for cars to run on vegetable oil. :rolleyes:

Here is the Jeep before he built it all up...
http://i4.photobucket.com/albums/y119/Rompn/OriginalJeep.jpg

Completed...
http://i4.photobucket.com/albums/y119/Rompn/AlmostFinishedJeep.jpg

Here it is out wheelen...
http://i4.photobucket.com/albums/y119/Rompn/JeepOffroad.jpg

Interior shot as I sold it...
http://i4.photobucket.com/albums/y119/Rompn/Jeep_dashboard.jpg

What the Jeep looked like after I took out the lift, tires, engine, tranny, transfer case and wiring... You can also see my 79' Cherokee off to the side...
http://i4.photobucket.com/albums/y119/Rompn/Jeep_front.jpg

http://i4.photobucket.com/albums/y119/Rompn/Jeep1.jpg

give me another month and i'll have my shit finished. i roll a 75 cherokee w/ a D60/14FF combo stuffed with detroits and 4.56 cogs. 16x10" black steelies with 42" IROKs. I just finished up my 4-link in the rear and completed my full hydrop set up. i'll post up dammit. i'll fawkin' do it! good to see you other guys enjoy these huge POSs.

good to see you other guys enjoy these huge POSs.

:laughing:

ok here is mine the frame (which is uncut) is a 76 Cherokee as is the motor and T18 tranny. The transfer case is a Dana 20 twin stick from a scout. Front and rear diffs are 75 J20 as is the Cab. front fenders are M715 Rear are 1950s Allis Chalmers tractor. Roll bar is 2 3/8s structural pipe. tires are 37-12.5-16.5 Hummers, wheels are ford. Propane for fuel, and Mallory ignition.
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/jeep%20build%20pics%20230%20Custom.jpg http://www.fullsizejeeps.com/jeeps/files/Users/bigun/jeep%20build%20pics%20228%20Custom.jpg

I just picked this up. I need to get rid of it before I start taking parts off it.

as promised here's some pics of my POS. it's gone through a lot of changes but the last albums are of its recent state. just got my t-case in, so i'll be posting finished pics as soon as i get a chance to get in the shop.

http://www.rebelrockrunners.org/gallery/nick

http://tellico.off-road.com/wwwthreads_uploads/1462603-TW4WD-10-05-URE-06-s.jpg

http://tellico.off-road.com/wwwthreads_uploads/1462610-TW4WD-10-05-URE-12-s.jpg

http://tellico.off-road.com/wwwthreads_uploads/1442235-surf%26turf002.jpg

while under construction......

http://tellico.off-road.com/wwwthreads_uploads/1429940-done003.jpg


http://tellico.off-road.com/wwwthreads_uploads/1429944-done007.jpg

http://tellico.off-road.com/wwwthreads_uploads/1415576-HPIM0328.JPG

http://tellico.off-road.com/wwwthreads_uploads/1415577-HPIM0329.JPG

http://tellico.off-road.com/wwwthreads_uploads/1429944-done007.jpg


wow talk about inboarding the springs.

that looks sick man. what springs are those in the rear? stock m-715?

and what flange do you have on the rear pinion, for the rotor?

wow talk about inboarding the springs.

that looks sick man. what springs are those in the rear? stock m-715?

and what flange do you have on the rear pinion, for the rotor?

All the springs are stock 5/4 ton, I upped to some 1.5" lift shackels after that pic was taken. Actualy lot's of things have changed since then...

The flange is a stock rockwell flange that I modified by welding a piece of flat, round steel to it. And drilled holes to match the lug pattern of a 91 Lumina.

Just picked up another couple of wagons.. two for 2K The one shown is super clean and low miles. I have to pick up the other one this week. Might make a mall/beach cruzah out this one. :D

Come awn Bev... brag about your ride!

I am sitting on the floor making little beadlocks for my resto-fied Monster Beetle :evil:

and its snowing so I stopped putting finishing touches on Bev's soccer-mobile of DEATH
http://img430.imageshack.us/img430/1325/bevlift7eh.gif (http://imageshack.us)

http://img342.imageshack.us/img342/9720/im0006681qt.jpg

here is mine I am about to bob the bed 6" behind the rear door, 3 link with coils and hopefully one ton drive train

Well I showed the sides last time this time I'll show you the front.
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/jeep%20build%20pics%20280%20Small.jpg

The back Please note that the spare tire carrier also double as a tow bar or will once we get a hitch welded on it. The back up ligths are controled off the trany and a switch on the dash.
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/jeep%20build%20pics%20281%20Small.jpg

Damage from the last trip What we think happened is since I do not have any lockers yet coming up on one of the ledges in the video you can see my front tire are spinning the it catchs traction and we think at that moment I twisted the shaft then a couple of days latter my buddy was showing someone how the twin stick worked let out the clutch and it went.
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/jeep%20build%20pics%20268%20Small.jpg
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/jeep%20build%20pics%20273%20Small.jpg

Come awn Bev... brag about your ride!
It did get some attention on base in the auto shop when we were putting on the tires:D
BTW this is my 77, 87 and 91 mutt:)

http://i4.photobucket.com/albums/y132/75bigchief/img003.bmp
http://i4.photobucket.com/albums/y132/75bigchief/img007.bmp
http://i4.photobucket.com/albums/y132/75bigchief/img004.bmp
This was mine till I sold it. I'm a fawkin idiot I loved that thing.

here's mine....

1979 j10...th400, QT..d44 front/rear...4" rusty's lift...31 AT's
Razor grille swap...

before...

after grille swap and lift with red primer...

now with better paint...

i am too broke to buy a star, but my little lame website has some of my FSJ's on it... been driving them for 10 yrs plus now...

I picked up a new toy since last posting to this thread... My Mall Cruiser.

You need Hi-steer

i am too broke to buy a star, but my little lame website has some of my FSJ's on it... been driving them for 10 yrs plus now...


Send them to me, I'll post them!


Chief@pirate4x4.com

You need Hi-steer


Nope! I brought it down to spring under to be my TowSlut :D

I change grille's like I change socks :laughing:

I change grille's like I change socks :laughing:
I hope you change your socks more than that:eek: :flipoff2:
Have to do a brake job on the Waggy then I can go and pimp it at the grocery store:D

http://tellico.off-road.com/wwwthreads_uploads/1415577-HPIM0329.JPG


:laughing: are those kegs for propane tanks?

Here's my duo.
http://gfsj.org/forums/attachment.php?attachmentid=1371&d=1128296397

http://www.imagestation.com/picture/sraid193/p229011a09a2522c785f925c119622523/f189cfd7.jpg
I call it "Budget Wheeler" :laughing: Now im lookin to sell it and build a YJ
But it's preatty much just a jeep done on the cheap. I got the tires for free and about 75% of the parts we had laying around or got for free

Here's my duo.
http://gfsj.org/forums/attachment.php?attachmentid=1371&d=1128296397

Anymore close up pics of the Wag on the trailer? Spec's?

Ok, here's the 'PumpKin' stuck in some good O'le Southern MD mud sporting some snake skin shoes with no grip :D


Let's post up some wheeling pix of the FSJ! Stuck, worst stuck, or even that occasional trip out in the front lawn :flipoff2:

BWT, practical joke pix also welcome...

USMCDOC14 painting the rim's at a Hooters meet and greet :flipoff2:



Why are these people looking at me and laughing :confused:

sweet :smokin:

Does this count? It's got a narrowed Wagoneer hood and AMC 360 :smokin:

http://www.rebelrockrunners.org/gallery/albums/aetna02/CIMG1584.sized.jpg

Does this count? It's got a narrowed Wagoneer hood and AMC 360 :smokin:



Considering what it 'used' to be.... yes, it counts in my book! Sup man? Slaughter any FSJ's lately?? Oh the humanity :flipoff2: :laughing:

http://www.offroad.no/snitz/uploaded/Frank/012.jpg

http://www.offroad.no/snitz/uploaded/Frank/029.jpg

Does this count? It's got a narrowed Wagoneer hood and AMC 360 :smokin:

hell no! this is blasphemy and you should be band













































:flipoff2:

That Chero is sick Frank.

Chief...just for you, in the background. And, the experienced eye might see another in the shop :D
http://www.rebelrockrunners.org/gallery/albums/completed/DSC00878.sized.jpg

I can't get away from the damn things!

They are like Lay's potato chips "You can't eat just one" but in this case You can't own just one because you need parts rigs to keep it going!

BTW this
http://www.pirate4x4.com/forum/attachment.php?attachmentid=229914&stc=1&d=1140057866
Is now this:D
http://img430.imageshack.us/img430/1325/bevlift7eh.gif

Here's pics of my pair of '79s. A Chief and a 4 door. The chief cost me 350 (minus the 350 of parts i sold = ZERO ), the 4 door cost me 100. They BOTH run. So i have TWO, WORKING, FSJs for 100!! :cool2:

http://www.ukjeeper.pwp.blueyonder.co.uk/jeep/fsj/78sj14.jpg

http://www.ukjeeper.pwp.blueyonder.co.uk/jeep/fsj/bobsjbefore.jpg

http://www.ukjeeper.pwp.blueyonder.co.uk/jeep/fsj/flex2.jpg

http://www.ukjeeper.pwp.blueyonder.co.uk/jeep/fsj/78sj6.jpg

http://www.ukjeeper.pwp.blueyonder.co.uk/jeep/fsj/78sj11.jpg

I bought the 4 door as a donor vehicle for the Chief, however i'm now deciding if a 4 door WT might be kinda cool.

http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0039.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0040.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0041.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0042.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0048.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0054.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0058.JPG

http://i30.photobucket.com/albums/c321/mark32725/UnderConstruction.jpg

Under Construction

Anymore close up pics of the Wag on the trailer? Spec's?

I do but puter has crapped.

Specs are:
D44 F&R 4.88 thick gears, welded front spooled rear, 2.5 in spacers all around.
Full hydraulic steering from PSC.
SOA with aal's 2 in body lift.
Custom spring plates to run shock and sway bar with SOA.
Stock 360 running Propane.
Custom bumper front and rear made by me. MM8000 winch.

I guess that's about it.

here's mine from my shitty camera phone,

just baught it what do you guys think:cool2:

You bought riverbeast. treat it nice :-)

45 minutes from the Hammers....

you tell me.

here's mine from my shitty camera phone,

It's rediculous how badass that rig is. I seriously might shit my pants when I see it in person.

i've got a treat for you then... it only lasts a minute or two but i think i have the film stashed somewhere along with my bigfoot film and Nessie pictures.

http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0039.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0040.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0041.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0042.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0048.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0054.JPG
http://koanwood.com/gallery/Callalante+2-16-06/image/595/IMG_0058.JPG


man i love that blue flame paint job on the black. sick looking jeep. what year is it?

here's mine from my shitty camera phone,

So your the one who got RiverBeast... Be sure to take some pic's of it on the trail. Never seen any before of it.:D

nah man, i was quoting the other guy's sig line. i'm sure it'll get its fair share of abuse though.

If anyone is looking for one of these I got one (that runs and has little or no rust) in the classifieds for $650.00 or trade for tube bender. Just thought I'd throw it out there. Hate to see a FSJ go to waste, but I have no time to work on it with the second baby on the way.

You bought riverbeast. treat it nice :-)
i'll try my other rig is a buggy.need to remember full body:D

here's mine from my shitty camera phone,


Looks nice what Engine you havge in there

I got the original 360 in it but i put an aluminum intake on it and edelbrock carb. I also pimped it with an entire MSD igniton and 8.8 wires. Nothing fancy but she'll scream :cool2:

sprtn4x4cw, go to IFSJA.org and post it up there. you'll probably get more bites there.

edit: here another blurry photo I was playing with in photoshop.
http://www.rebelrockrunners.org/nick/Cherokee/smalljeep.jpg

This is what mine looked like when I got it.
http://img.photobucket.com/albums/v157/lifenajeep/Jeeps/1stday.jpg

Here it is after I put a little work into it.
http://img.photobucket.com/albums/v157/lifenajeep/Jeeps/cherokee.jpg

Here it is after falling off a trailer while doing 70mph down the interstate
http://img.photobucket.com/albums/v157/lifenajeep/Jeeps/cherokeewreck3.jpg

Here is what it looks like now
http://img.photobucket.com/albums/v157/lifenajeep/Jeeps/Chief033004.jpg

I now have 6 more FSJs......must find more

man i love that blue flame paint job on the black. sick looking jeep. what year is it?

67

Well a group of us went wheeling last week Clem brought out his stock 80s J20 the other rigs were 1 chevy pickup and 2 dodge ramchargers. Clem wisely quit after the first drop off after everybody had to help him get down, I made it all the way to the third ledge then broke the front driveshaft again!
My jeep
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/2212006trailride%20004%20Small.jpg
Clem"s
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/2212006trailride%20005%20Small.jpg
the first ledge down
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/2212006trailride%20008%20Small.jpg
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/2212006trailride%20007%20Small.jpg
Craig's chevy long bed coming down to give you an idea how deep a drop this is
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/2212006trailride%20010%20Small.jpg
Karl's ram coming out of the ledge that bit me
http://www.fullsizejeeps.com/jeeps/files/Users/bigun/2212006trailride%20015%20Small.jpg

The thread that will never die...
Long live the FSJ!!!
http://www.geocities.com/ncjeepers/Vehicle_Pics/M725_fish1.JPG

The thread that will never die...
Long live the FSJ!!!
http://www.geocities.com/ncjeepers/Vehicle_Pics/M725_fish1.JPG



:Drool: I'm waiting for one.....:D

Well, it's over.. the end to TPE (Todd's Parts Emporium)

Shipped the remaining bodies to the local recycler and my parts yard is finally closed at this location. I will continue to collect but not at this volume and the next buildup of the next wagon is right around the corner. Total talley that left out was 25 Jeeps 80% FSJ. I figured over the years that there had to have been 50 Jeeps easy pass through this yard :eek: Oh well, here's a pic of the remaining that are soon to be crushed :(

Here is the current state of My Cherokee. 360/T 18/ Dana 20
http://www.pavementsucks.com/forums/attachments/200603/attachment-973833.jpg

Well, it's over.. the end to TPE (Todd's Parts Emporium)

Shipped the remaining bodies to the local recycler and my parts yard is finally closed at this location. I will continue to collect but not at this volume and the next buildup of the next wagon is right around the corner. Total talley that left out was 25 Jeeps 80% FSJ. I figured over the years that there had to have been 50 Jeeps easy pass through this yard :eek: Oh well, here's a pic of the remaining that are soon to be crushed :(


This is almost bringing me to tears:( . We are just about to do this to our collection come this spring. Just too many useless, rusted out carcasses........ It will be a sad day.

Iam building a Jeep 1979 J-20 for moderate rock crawling and iam looking for the Gladiator truck grill... www.bjsoffroad.com says they have them but i have looked and looked for one and have had no results. If you have any info please Private message me, thanks
:smokin:

It is really great to see so many FSJ's still alive out there. My family had a 1976 Cherokee Chief "Super Chief" with dark grey metallic exterior, black interior, 360, the ever famous Quadra-Trac, etc. Unfortunately my dad sold it in 1989 and there has been heavy regret ever since.:( I've tried to track it down in this area to no avail. I really wish I could have received it. If I ever find one similar to what my dad had I'd definately buy it and restore it down to the last nut, bolt, and washer. We still have Jeeps in my family. I have 2 CJ's, both 76's(irony??:confused: ), and I bought my dad an 82 CJ-7 Laredo last year for father's day. But not a FSJ(yet).

Till I have a FSJ of my own someday all of you keep up the FSJ faith.

http://www.supermotors.org/getfile/310797/fullsize/P4080524.JPG

http://www.supermotors.org/getfile/310798/fullsize/P4080525.JPG

http://www.supermotors.org/getfile/311658/fullsize/2006%20d%20Apr%2009_47.JPG