|
Toy 4Runner Man 08-27-2003, 08:29 PM I am asking this on behalf of my brother. How would one remove the residual pressure valve on a '65 Land Cruser? He took a look at the valve, but wasn't sure on how to do it. Any help would be great! Jody cruiserbrett 08-27-2003, 08:36 PM On a stock '65? arent they single circuit masters? Might consider upgrading to a dual circuit master if you have not already... On most of the dual circuit setups, just undo the big nut that the hydraulic line screws into on the master. under the big copper colored nut there is a little white and black deal with a spring in it, this is the residual valve... -Brett woody 08-28-2003, 05:12 AM http://www.ih8mud.com/tech/residvalve.html kling-on 08-28-2003, 07:07 AM the answer to ALL ? cruzer ..... www.ih8mud.com ;) woody you rock :D woody 08-28-2003, 07:17 AM Originally posted by kling-on ;) woody you rock :D And roll.... (before nolen says it...) :flipoff2: Toy 4Runner Man 09-01-2003, 08:03 PM He is still needing some help on the single outlet M/C residual valve removal. Thanks | |