tranny question

[DT-FabandMfg.]

i have a 351 cleveland with a c4 tanny and i just got a 302 with a t19 out of an old mercury capri. i was wondering if the c4 would bolt up to the 302? what t-case will bolt up?

[72Bronco]

Yes the C4 will fit.
Dana 20 and maybe the 205 for the Transfer Case.
You'll probably need to swap out your tail shaft of the C4 for a 4x4 one...the one from the Capri is not what you need.

Call advanced adapters for help.

Nick

[82F100SWB]

T19 in a Capri? Really.... Where can I find some of the stuff you're smokin dude?

[SittonHigh]

The 351 Windsor has the same pattern as the 302. To make sure, if you have both sitting there, take some measurements of the pattern. There is a noticable difference in size

[Alpo]

Originally posted by SittonHigh
The 351 Windsor has the same pattern as the 302 not the Clevland. To make sure, if you have both sitting there, take some measurements of the pattern. There is a noticable difference in size


Wrong, The 351C (clevelend) runs the same bellhousing pattern as the 221/260/289/302/351W.

The 351M/400 runs a different pattern. Too many people confuse the 351C with the 351M.


Eric

[SittonHigh]

I am glad you pointed that out. It is just what I have been told. OF course that is why I told him to measure. I stand corrected.

[Oatmeal]

Originally posted by Alpo



Wrong, The 351C (clevelend) runs the same bellhousing pattern as the 221/260/289/302/351W.

The 351M/400 runs a different pattern. Too many people confuse the 351C with the 351M.


Eric You ARE the Ford info guru but, correct me if I'm wrong, don't the 260 and early 289 have a slighty different bell housing pattern than the Clevelands, big sixes (240 and300) and later Windsors:confused: And, hey, I see you got a Bronco now. You didn't have that before did you? I'm kinda of a Bronco fanatic myself! (I gotta put mine back together, though:eek: ).....Hans

[Alpo]

Originally posted by Oatmeal
You ARE the Ford info guru but, correct me if I'm wrong, don't the 260 and early 289 have a slighty different bell housing pattern than the Clevelands, big sixes (240 and300) and later Windsors:confused: And, hey, I see you got a Bronco now. You didn't have that before did you? I'm kinda of a Bronco fanatic myself! (I gotta put mine back together, though:eek: ).....Hans


D'oh (bang head against keyboard)!!!


You got me :emb2:

221/260 and early 289 do indeed use a smaller 5 bolt pattern. different than the more well known 6 bolt pattern........The six bolt pattern started in 1965, coinciding with the introduction of the 240/300 big six.

I hang my head in shame..........









:flipoff2:


Eric