|
: Doh! wngrog 09-24-2001, 12:32 PM <IMG SRC="smilies/nuke.gif" border="0"> <IMG width=506 height=366 SRC="http://www.pirate4x4.com/ubb/uploads/cic5.jpg"> <IMG SRC="smilies/nuke.gif" border="0"> <IMG SRC="smilies/rolleyes.gif" border="0"> nightcrawler 09-24-2001, 12:38 PM <FONT COLOR="yellow">Ouch!</FONT> -nc Medusa 09-24-2001, 12:49 PM BTDT <IMG SRC="smilies/biggrin.gif" border="0"> From the shape of your springs, Nolan, it looks like they have been doing a lot of wrapping. Time to get busy on that torque bar. [ 09-24-2001: Message edited by: Medusa ] orangefj45 09-24-2001, 02:20 PM hey nolan! judging from the pic you have quite the pinion angle. i figure the rear axle has'nt been in there very long (since i just got your old one) but do you have any pinion oiling problems? <IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0"> Reddog 09-24-2001, 04:32 PM That driveline looks like it came out of either the front of an FJ60 or a mini truck ? Jettech 09-24-2001, 04:58 PM That Pinion is pointing to the Sky <IMG SRC="smilies/biggrin.gif" border="0"> how many *? I need a wrap bar too,I want to see what you come up with,I just need my tires,i'm getting those this week so I should have my grand unveiling next week <IMG SRC="smilies/biggrin.gif" border="0"> Rob wngrog 09-24-2001, 05:10 PM Hell that pinion angle is NOTHING!! I went from 33* to 22*, there will not be any problem with that. THat is why I had to go with the Reverse Cut Dana 60 in the rear. With the clearance the 9" hybrid gave me in the front, I would LOVE to have one in the rear too. Jettech 09-24-2001, 05:45 PM 22* do you have that seperate chamber for the pinion bearings,thats 4* more than Dyna recomends even with the extra chamber. You trailer mostly right? Rob wngrog 09-24-2001, 05:53 PM I tis fine, really. I overfill to the hilt! I trailer 99%, but it sure does ride awesome with that SR and SOA!! Cowtowner 09-25-2001, 12:36 PM We should have never let a Toyota run in a all Jeep event.... <IMG SRC="smilies/thefinger.gif" border="0"> Nolen, you get your sheet dropped off at Tom's yet? COMPLAINE 09-25-2001, 01:46 PM So how did you do that? It looks like the cross broke, that usually doesn't happen because of wrap, axle wrap usually busts the u joint straps off of the yoke. Ian- wngrog 09-25-2001, 03:00 PM Originally posted by COMPLAINE: <STRONG>So how did you do that? It looks like the cross broke, that usually doesn't happen because of wrap, axle wrap usually busts the u joint straps off of the yoke. Ian-</STRONG> Nah, it was the ears on the yoke...the driveshaft was too long and it had no play and when it wrapped I broke the ears off the slip yoke. | |