Got Any? As i near competion of peices for the engine/tranny swap, i need as many pics as possible of your engine mounts, especailly if your using a 420 behind it. Need to get an idea for what i need to fab up. Thanks, Matt:D

Help me out here guys... i know you got some..

mine are the regular AA ones...i dotn have a digi cam so i cant post pics...just get some big angle iron and weld in some gussets (to make ones like AA),,or make some better ones (i'll be making my own too for the fj45!!)

Thanks peter, but i just want a freaking picture. thats ALL i'm asking for now is one freakin picture, someone, PLEASE???

I'll post one tonight when I get home. I'm using the AA ones too, but I also have a picture of the Butch Built ones on my PC at home.

Here's a few from an FJ60 350 swap. Not AA, but custom made tube motor mounts.

another

one more.

Thanks man, much apreciated. anyone have a pic of the AA ones? Peter, what are you going to do to improve on the design for the 45? Matt:D

instead of using AA ones, im thinking of making some..i like dogwalker's mounts and may make some like that..or make some like the AA ones..i'd rather use a stock style mount instead of the round donuts AA uses, since i've heard complaints that they squish out and dont last long...i'll post pics when i do them (may be a while)..i think im going to invest in a little red star and digi cam so i can post pics

or simply weld extention to stock 350 motot plate, add a couple of urethene cj body mounts(shouldn't squish), and trhu bolt to relocated lc frame mount. simple and cheeap.
http://home.earthlink.net/~billstayner/momnt2.jpg

Thats a new idea! how long have you been running that? do you get more engine movement than normal?

Originally posted by Fixxxxer66
Thanks peter, but i just want a freaking picture. thats ALL i'm asking for now is one freakin picture, someone, PLEASE???

Here is my version of an AA mount.

HTH
rich

motor movement? shouldn't happen as long as bolt holes do not ream out. anyway has to last longer than stock lc isolator that was previously mounted, before walker hill,rubicon pulled it apart. very scary to have loose motor, it pulls full throttle by itself!!

instead of using AA ones, im thinking of making some..i like dogwalker's mounts and may make some like that..or make some like the AA ones..

Those mounts were built by Justin Reece, for his Vortec swap in his FJ60, for more info, you can contact him on this board. Goes by USFSIHC.

Jeff

well its been posted before, but here is what i use, i dotn have any pics of it installed but it came out sweet adn i like it alot! jiMMy

Hell Yeh, thats what im talking about! thanks guys! keep em coming... Jeff, do you have any pics of those mounts you have? Thanks, Matt:D :D

Originally posted by Jimmy76FJ40
well its been posted before, but here is what i use, i dotn have any pics of it installed but it came out sweet adn i like it alot! jiMMy

COOL!!! Jimmy where did you get that sucka???

just take some square tube notch it at the right angle, weld in some angle iron, drill a hole at the top and use stock 350 motor mounts. the mounts are very simple to make and pretty hard to screw up (plus they look stock)

i would post a pic but i don't have one and i can't post anyways

http://www.artmorrison.com/

Originally posted by TRD
just take some square tube notch it at the right angle, weld in some angle iron, drill a hole at the top and use stock 350 motor mounts. the mounts are very simple to make and pretty hard to screw up (plus they look stock)

i would post a pic but i don't have one and i can't post anyways
I know what you are talking about, and that's how I had planned on mounting them. But I was looking for other ideas too. I like the "Engine craddle" idea. Plus that would give me killer place to mount the frount of the belly pan to cover up that auto tranny pan. :D:D:D

Metalmender: Bitchin exhaust work!! 2 or 2 1/2 " tube? Looks good.

Originally posted by Aggro
Metalmender: Bitchin exhaust work!! 2 or 2 1/2 " tube? Looks good.
Thanks

The Y pipe is 2 1/4" 321 stainless and all hand made and then it dumps into 2 1/2" which is a combination of cessna parts and home brew:D
rich

Originally posted by Jimmy76FJ40
well its been posted before, but here is what i use, i dotn have any pics of it installed but it came out sweet adn i like it alot! jiMMy


That's what I'm using also. Seems to be the most simple/cost effective way. Those are my favorite words.:D