PDA

: what do the 1.6L 16 valves come out of

cruizerlover
12-09-2001, 01:12 PM
What vehicles do the 1.6L 16v engines come out of and what does it take to install them in a sammi? Is there a kit needed?

Thx
:usa:
mas2
12-09-2001, 05:41 PM
TT makes the wiring for it. The motor comes out of 92-95 Suzuki and Geo Tracker for the OBD1. OBD2 was 96 and up, I think that you have to use the 92-95 dist. and wiring.

Mike
cruizerlover
12-12-2001, 06:46 AM
Thx, for the info. So all I need is just the motor and it just bolts straight in no mods? Are the mounts the same or do I need to manufacture some? Also is the wiring harness usable from the 16v engine?

:usa:
mas2
12-12-2001, 09:27 AM
Goto TrailTough.com they have the info that you need.

Mike
suzuki w/the HEAT
12-12-2001, 03:01 PM
i might be mistaken but i thought all the trackers were 8v. the sidekicks are the 16v??? stay away from the obd2 unless you know all about it.
Root Moose
12-12-2001, 06:23 PM
Originally posted by cruizerlover
Thx, for the info. So all I need is just the motor and it just bolts straight in no mods? Are the mounts the same or do I need to manufacture some? Also is the wiring harness usable from the 16v engine?

:usa:

It's not a straight bolt in but is doable for your typicaly 3-4 banana shade tree howler monkey.

You need to adapt to the Samurai transmission if you don't use a TracKick tranny. Most of the vendors sell a kit for this.

There are wiring issues related to getting the EFI harness attached to the Sam harness. It can be done yourself but if you don't feel confident/comfortable with electrical stuff TrailTough is the only manuf that I know of that makes a harness.

The motor mounts are slightly different (I think). You can fab something up or the kits will probably have the required bits.

The 16V is a tall engine compared to the 8V engine. If you make your own mounts watch your hood clearance.

r@m