erez
09-24-2003, 04:45 PM
On my 110 Sulsbery axle I have MaxiDrive axle shafts and a Detroit Locker. I have ordered 1:4.75 gear ratio, does enyone knows if the locker will support this ratio (now I have 1:3.54) or there are any needed MOD to do ?
|
erez 09-24-2003, 04:45 PM On my 110 Sulsbery axle I have MaxiDrive axle shafts and a Detroit Locker. I have ordered 1:4.75 gear ratio, does enyone knows if the locker will support this ratio (now I have 1:3.54) or there are any needed MOD to do ? Old Scout 09-24-2003, 04:49 PM If it follows the same rules as a D60 you will need a new slow case locker or a ring gear spacer. The spacer is ~35.00. revor 09-24-2003, 09:18 PM Actually the Detroit for the Salisbury fits inside the stock carrier like a 14 bolt... So any Detroit for a sals will fit either ratio carrier if you are keeping 24 spline axles that is.. | |