I'm parting out an 1984 Extra Cab 4x4 (rolled) and an
1985 Extra Cab 2WD body and paint in great condition, no motor, tranny, radiator or seats, everything else is there and in good shape, This truck has only 80,000 miles on it, so it's still in good shape. I have most of interior it's brown. Exterior is white


$500 for custom flatbed built by Jay Kopycinski (ROCKTOY) It has full roll bar, fast back bars, built in toolbox with lock, 2 .50 caliber ammo cans for extra storage, tail lights, diamond plate deck with spare tire mount. He did an excellent job building it and it looks awesome. Go to this link for pics and a detailed description of this bed: http://www.4x4wire.com/toyota/tech/tube_bed/
$300 for 1984 front axle, complete hub to hub with 4.88s and Auburn posi
$200 for 1984 rear axle, complete hub to hub with 4.88s and Auburn posi
$350 for two Longfields with about 4,000 miles on them and only one wheeling trip in Moab. They are in perfect shape
$100 pair of 63 inch chevy springs with dual shackles
$75 pair of 63 inch chevy springs
$50 for 1985 Wagoneer springs
$75 for 4 (front and back) 4" procomp lift springs
$50 for drop shackle for front
$30 for 1985 efi gas tank, pump included
$30 for 1984 gas tank, pump included
$100 for 2 1984 seats covered with Wet Oakle Seat covers not in perfect condition
$200 for All Pro Offroad rock sliders.
$200 4 Rancho 9012s hardly been used, never been wheeled
$40 for 2 All Pro extended brake lines, hardly been used, never wheeled
$60 each for 2 Aisin hubs

$1200 OBO for 1985 front Toyota axle which includes:
4.10s and Spool from Randy's Ring and Pinion
Longfields
All Pro Cross Over steering
IFS steering box-gone through at Marlin's, never been used
All Pro vented Rotors
IFS disk brakes
new break pads
All Pro 3/4" spacers
all new bearings and seals
All Pro U-bolt Flip Kit
All Pro Diff guard
have a spare birfield
have all reciets


$450 OBO for 1988 rear Toyota axle
4.10s and Spool from Randy's Ring and Pinion
all new bearings and seals
All Pro diff guard
All pro U-bolt eliminator kit
new brake pads
have all reciets

There is $3000 into the two of these axles!! This is a great deal you can't even come close to building axles for this much! Price them both out and realize what a deal this is.

Pics for any of this should be available by this weekend sometime, let me know what you want pics of.
respond to this, email me: joe@spade.net or call me 510-303-5663 (cell)
I'm located in the Bay Area in Castro Valley, and I prefer not to ship this stuff, first shot goes to those who can pick it up. I'm parting out both vehicles, so for parts not listed, ask!
Everything is OBO!!

Thanks,
Joe

$350 for two Longfields with about 4,000 miles on them and only one wheeling trip in Moab. They are in perfect shape


its not a good selling point if your asking more for them than what they are new..... www.marlincrawler.com 169 apiece which comes to a total of 338....

oops, Thanks for catching my mistake. I meant $300 on the longfields. I'm half delirious after posting so much crap. :D

I'm interested in:

1) Allpro brakelines (will take these for sure)
2) Wagoneer springs
3) Seats with the covers

Now the questions:

1: are the springs the 7-leafs?
2: How are the bushings?
3: When you say the seats are not in perfect condition, how not-perfect are they? Pics?

Thanks,

Drew

Got the front driveshaft off the '84? I'm in Fresno.

for god's sake will someone please give freds40 a fawkin driveshaft :flipoff2: that's all the poor guy has posted about for a month straight!:eek: i mean come on you are in Cali so they must be a dime a dozen If shipping would not kill the deal I personally would give him the one I have!

BUMP.... WISH i was one the west side to get that flat bed... i NEED one bad

shot gun on the chevy springs

PS. I called ya

BTW my phone is 408 773 9222 wk or 408 718 7184 at night.

Thanks! Rob

want any trades? me likes the flatbed.....look at my crap im selling lets do dome tradin

http://www.pirate4x4.com/forum/showthread.php?s=&threadid=161591

PM'ed ya about the hubs, brake lines and other stuff.

Deliver the flatbed to Indy and I'll take it! You fawkers always sell the good shit in CA. :flipoff2:

PM'ed you about a set of chevy springs.

KC

HOW MUCH FOR SHIPPING FOR THE 4" PRO COMP LIFT TO 98092?
IT'S A STRAIGHT AXLE LIFT RIGHT??

PMing you about a 4.88 third

Do you still have the aisin hubs?

Joseph

interested can pick em up

Question about the bed.....Will it fit or come close to fitting an 82 longbed?! If it will, I am seriously intersted in the flat bed. I am in the sac area and can come pick up. I will try to contact you later. nick

Sorry guys, I think Joe decided to keep his crap. When I picked up the Chevy's he had got a donor cab to fix his rolled truck.

I don't think he even checks this now. Sorry:(