guys I need the wiring diagram for doing the 1.6 swap into my sami or at least the stock wiring diagram for the 1.6 its out of a 90
fuel injected of course.
thanks:D :beer:
or at least a place to look for it

Is this what your looking for. Don't know if it is right though. I compared it to my 1600 swap and it looked ok.


http://www.users.qwest.net/~astein1964/fuelinjection.html


HTH

the above post is the same that I used for my 1.6 swap and it worked great. Here is the fuel pump I used because it ran the right high presure for my application and it is $70.00 dollars.Its a NAPA# 2P74028 tru flow. make sure that you run the return line from the fuel injection back to the tank.
Rick:D

When I did my 1600 conversion I put the stock sidekick pump in my sammy tank. Can't even hear the pump.


Hey zukstur...........What year was your 1600 swap?? The only thing I see missing in that right up is the speed sensor. On my 92 if the speed sensor is not hooked up the engine will run in limp mode. Then the check engine light will come on. Not good for fuel consumtion and your valves.

hope fully that will help me out :beer:
couple questions how much body lift do I need to run the stock intake?
also can anyone post some pics of an installed 1.6 so I can see how it all fits. thanks

Check your Pirate mail

i used that same site when i did my 1990 motor for my dad it worked out good :massey: