|
FearMe 10-03-2003, 07:24 AM Will a 205 that's mounted on a 435 in an F150 bolt to a 4x4 C6 from a BB that had a 1356? Both C6's are small block. Damn, I just read that. If you can't figure out the question you sure as hell won't know the answer..:D ImNotRight 10-03-2003, 07:28 AM Probably (check the output shaft length on both).. but keep in mind once you swap it over even if it physcially bolts up you won't be able to shift it without some major clearancing to the adaptor.. FearMe 10-06-2003, 07:32 AM BTT ImNotRight 10-06-2003, 08:26 AM What else are you looking for? Check the output shaft lengths (there are 2 different lengths) As in how far it sticks out past the seal. If the lengths are the same, then yes, they'll swap, but you'll have to do some grinding/cutting on the adaptor to get the 205 to be able to shift. The spline count and bolt pattern are both the same. | |